IC Chips

74 series Digital Integrated Circuits

CD40 series Digital Integrated Circuits

Optical Couplers

Clock & Calculator ICs

Operational Amplifiers

Power Switch Ics

Driver Ics

Flash Memory

Memory

Audio Special Purpose

Clock/Timing - Application Specific

Clock/Timing - Clock Buffers, Drivers

Clock/Timing - Clock Generators, PLLs, Frequency Synthesizers

Clock/Timing - Delay Lines

Clock/Timing - IC Batteries

Clock/Timing - Programmable Timers and Oscillators

Clock/Timing - Real Time Clocks

Data Acquisition - ADCs/DACs - Special Purpose

Data Acquisition - Analog Front End (AFE)

Data Acquisition - Analog to Digital Converters (ADC)

Data Acquisition - Digital Potentiometers

Data Acquisition - Digital to Analog Converters (DAC)

Data Acquisition - Touch Screen Controllers

Embedded - CPLDs (Complex Programmable Logic Devices)

Embedded - DSP (Digital Signal Processors)

Embedded - FPGAs (Field Programmable Gate Array)

Embedded - FPGAs (Field Programmable Gate Array) with Microcontrollers

Embedded - Microcontroller, Microprocessor, FPGA Modules

Embedded - Microcontrollers

Embedded - Microcontrollers - Application Specific

Embedded - Microprocessors

Embedded - PLDs (Programmable Logic Device)

Embedded - System On Chip (SoC)

Interface - Analog Switches - Special Purpose

Interface - Analog Switches, Multiplexers, Demultiplexers

Interface - CODECs

Interface - Controllers

Interface - Direct Digital Synthesis (DDS)

Interface - Drivers, Receivers, Transceivers

Interface - Encoders, Decoders, Converters

Interface - Filters - Active

Interface - I/O Expanders

Interface - Modems - ICs and Modules

Interface - Modules

Interface - Sensor and Detector Interfaces

Interface - Sensor, Capacitive Touch

Interface - Serializers, Deserializers

Interface - Signal Buffers, Repeaters, Splitters

Interface - Signal Terminators

Interface - Specialized

Interface - Telecom

Interface - UARTs (Universal Asynchronous Receiver Transmitter)

Interface - Voice Record and Playback

Linear - Amplifiers - Audio

Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

Linear - Amplifiers - Special Purpose

Linear - Amplifiers - Video Amps and Modules

Linear - Analog Multipliers, Dividers

Linear - Comparators

Linear - Video Processing

Logic - Buffers, Drivers, Receivers, Transceivers

Logic - Comparators

Logic - Counters, Dividers

Logic - FIFOs Memory

Logic - Flip Flops

Logic - Gates and Inverters

Logic - Gates and Inverters - Multi-Function, Configurable

Logic - Latches

Logic - Multivibrators

Logic - Parity Generators and Checkers

Logic - Shift Registers

Logic - Signal Switches, Multiplexers, Decoders

Logic - Specialty Logic

Logic - Translators, Level Shifters

Logic - Universal Bus Functions

Memory - Batteries

Memory - Configuration Proms for FPGAs

Memory - Controllers

PMIC - AC DC Converters, Offline Switchers

PMIC - Battery Chargers

PMIC - Battery Management

PMIC - Current Regulation/Management

PMIC - Display Drivers

PMIC - Energy Metering

PMIC - Full, Half-Bridge Drivers

PMIC - Gate Drivers

PMIC - Hot Swap Controllers

PMIC - Laser Drivers

PMIC - LED Drivers

PMIC - Lighting, Ballast Controllers

PMIC - Motor Drivers, Controllers

PMIC - OR Controllers, Ideal Diodes

PMIC - PFC (Power Factor Correction)

PMIC - Power Distribution Switches, Load Drivers

PMIC - Power Management - Specialized

PMIC - Power Over Ethernet (PoE) Controllers

PMIC - Power Supply Controllers, Monitors

PMIC - RMS to DC Converters

PMIC - Supervisors

PMIC - Thermal Management

PMIC - V/F and F/V Converters

PMIC - Voltage Reference

PMIC - Voltage Regulators - DC DC Switching Controllers

PMIC - Voltage Regulators - DC DC Switching Regulators

PMIC - Voltage Regulators - Linear

PMIC - Voltage Regulators - Linear + Switching

PMIC - Voltage Regulators - Linear Regulator Controllers

PMIC - Voltage Regulators - Special Purpose

Specialized ICs

Modules

IGBT

IPM

Thyristors

Rectifiers

Power Supply

Smart Power Module

SCR,GTO and Diode

FET

Darlington Transistors

RF Modules

CNC PRODUCTS

ENCODER

Motor

Servo drive & amplifier & Servo

Diode Module

Transistor Module

Switch Relay

PLC

Inverter

Contactor & Breaker

Elevator Board

Industry Control

Transistors

Diodes

Bipolar transistors

Resistors

Carbon Film Resistors

Cement Resistors

Chassis Mount Resistors

Chip Resistor - Surface Mount

Current Sense Resistors

Fusible Chip Resistor

High Precision & Low TCR SMD Resistors

High Voltage Resistor

LED Strip Resistors

MELF Resistor

Metal Alloy Resistors

Metal Film Resistor (TH)

Metal Glaze Resistors

Metal Oxide Film Resistors

Metal Oxide Resistors

NTC Thermistors

PTC Thermistors

Photoresistors

Potentiometers & Variable Resistors

Precision Potentiometer

Resistor Networks & Arrays

Resistor Networks & Arrays (TH)

Ultra Low Resistors (SMD)

Variable Resistors

Varistors

Wirewound Resistors

Capacitors

Aluminum Electrolytic Capacitors - SMD

CL21 Capacitor

Ceramic Disc Capacitors

High Voltage Capacitors

Metallized Polyester Film Capacitor

Multilayer Ceramic Capacitors MLCC - Leaded

Multilayer Ceramic Capacitors MLCC - SMD/SMT

Mylar Capacitor

Niobium Oxide Capacitors

Polyester Film Capacitors

Solid Polymer Electrolytic Capacitor

Supercapacitors & Ultracapacitors

Suppression Capacitors

Tantalum Capacitors

Trimmers, Variable Capacitors

Inductors & Ferrite Beads & Transformers

Antennas

Current Transformers

General Inductors (TH)

HF Inductors

Inductors (SMD)

LINE Filter

Power Inductors

Power Transformer

RJ45 Transformer

Radial Inductor (TH)

The circular inductors

Crystals

49S

49SMD

49U

Ceramic Resonators

DIP Oscillators(XO)

Radial Cylinder Crystals

SAW Resonators

SMD Crystals

SMD Oscillators(XO)

Connectors

AV Connectors

Audio & Video Connectors

Banana and Tip Connectors

Card Edge Connectors

Circular Connectors

Connector - Card Sockets

Connectors

Connectors - Accessories

Connectors - Housings

Contacts

D-Sub Connectors

Ethernet Connectors/Modular Connectors

FFC, FPC (Flat Flexible) Connectors

Fiber Optic Connectors

IC & Component Sockets

LED Light Pipes

Mezzanine Connectors (Board to Board)

PCB Connectors - Headers, Male Pins

PCB Connectors - Headers, Receptacles, Female Sockets

PCB Connectors - Housings

Power Connectors

RF Connectors/Coaxial Connectors

Shunts & Jumpers

Terminal Blocks - Accessories

Terminal Blocks - Barrier Blocks

Terminal Blocks - Din Rail, Channel

Terminal Blocks - Headers, Plugs and Sockets

Terminals

Test Clips

Test Points/Test Rings

USB Connectors

Unspecified Connectors

Screw-type wiring

Spring-type wiring

Pluggable Terminal Blocks

Through-wall Terminal Blocks

Automotive Terminals

Terminal Housings, Insulation Sleeves & Blocks

Quick Disconnect Wire Connectors and Terminals

Spare & Wear Tooling

Automotive Connectors

PCB Connectors

Sign In

3.Enter "account center"->"My inquiries" and check the status of your inquiries

Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.

I agree all UTSOURCE Terms & Conditions,Privacy Statement
Agree Later Submit

Delivery Address

Alternate Text

+ Add Address

Confirm

The new shipping address

*Country/Region :
*Contact :
*Cell Phone:
+

* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.

Country Code
*Address :
*City :
Province/State :
*Province/State :
*Post Code :
Please enter a new 5-digit zip code..
Company :
Cancel
Submit

Operational Amplifiers

Search results filter:

Home > Elec-component > IC Chips > Operational Amplifiers

Filters:
clear
Alternate Text
relate product result :9262 items
Alternate Text Utsource
UA710HC

Enlarge

Original parts, guaranteed brand new

UA710HC

CAN-8

FSC

88+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

AU $4.84962

AU $4.36466

≥50:

AU $4.71491

AU $4.24342

≥100:

AU $4.49039

AU $4.04135

From: AU $4.49039

Description: UA710HC is a monolithic operational amplifier manufactured by Fairchild Semiconductor. Features: Wide common-mode (up to VCC +) and differential voltage range Low power consumption Hi

Stock:10000

Minimum:1

Favorite

TLC2274ACD

Enlarge

Used and refurbished parts guaranteed can work well

TLC2274ACD

SOP-14

Texas Instruments

06+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource

≥1:

AU $3.77452

AU $3.39706

≥5:

AU $2.51634

AU $2.26471

≥10:

AU $2.26471

AU $2.03824

≥20:

AU $2.20180

AU $1.98162

≥50:

AU $2.13889

AU $1.92500

≥100:

AU $2.07598

AU $1.86838

≥200:

AU $2.01308

AU $1.81177

≥500:

AU $1.98791

AU $1.78912

≥1000:

AU $1.95017

AU $1.75515

From: AU $1.95017

Description: The TLC2274ACD is a low-power, high-speed, quad operational amplifier. Features: Low supply current of 0.9 mA/amplifier Low input offset voltage of 0.8 mV High gain bandwidth product

Stock:10000

Minimum:2

Favorite

W29N01GVSIAA

Enlarge

Original parts, guaranteed brand new

W29N01GVSIAA

TSOP48

Winbond

15+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

AU $3.87970

AU $3.49173

≥50:

AU $3.77193

AU $3.39473

≥100:

AU $3.59231

AU $3.23308

From: AU $3.59231

Description: W29N01GVSIAA is a 1 Gb (128M x 8 bit) Flash Memory manufactured by Winbond. Features: Low voltage operation: 2.7V to 3.6V Fast read access time: 55/60/70/80/90/100/120/133/150/166/200/2

Stock:10000

Minimum:1

Favorite

VX1937

Enlarge

Original parts, guaranteed brand new

VX1937

TQFP

Vxis

09+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

AU $9.60943

AU $8.64849

≥50:

AU $9.34001

AU $8.40601

≥100:

AU $8.98078

AU $8.08270

From: AU $8.98078

VX1937 is a TQFP (Thin Quad Flat Pack) package from VXIS. It is a high-speed, low-power, low-voltage, 32-bit RISC microcontroller. It is designed for embedded applications such as automotive, industri

Stock:10000

Minimum:1

Favorite

Z0853606VSC

Enlarge

Original parts, guaranteed brand new

Z0853606VSC

PLCC44

Zilog

97+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

AU $7.04692

AU $6.34222

≥50:

AU $6.84934

AU $6.16440

≥100:

AU $6.58590

AU $5.92731

From: AU $6.58590

Description: Z0853606VSC is a PLCC44 Zilog microcontroller. Features: The Z0853606VSC has a 16-bit Z80 CPU core, 64Kbytes of on-chip ROM, 64Kbytes of on-chip RAM, and a wide range of peripherals incl

Stock:10000

Minimum:1

Favorite

UCC3806N

Enlarge

Original parts, guaranteed brand new

UCC3806N

DIP16

UNI

96+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

AU $8.55312

AU $7.69781

≥5:

AU $8.12546

AU $7.31292

≥10:

AU $7.69781

AU $6.92803

≥20:

AU $7.48398

AU $6.73558

≥50:

AU $7.27015

AU $6.54314

≥100:

AU $7.05632

AU $6.35069

≥200:

AU $6.84250

AU $6.15825

≥500:

AU $6.75696

AU $6.08127

≥1000:

AU $6.62867

AU $5.96580

From: AU $6.62867

Description: The UCC3806N is a high-performance, current-mode, fixed frequency, pulse-width modulation (PWM) controller with an integrated high-side MOSFET driver. Features: - High-side MOSFET driver

Stock:10000

Minimum:1

Favorite

WS628128LLPG-70

Enlarge

Original parts, guaranteed brand new

WS628128LLPG-70

DIP

Wingshing

11+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

AU $2.30507

AU $2.07456

≥50:

AU $2.20029

AU $1.98026

≥100:

AU $2.09551

AU $1.88596

From: AU $2.09551

Description: This is a 128K x 8 bit low power CMOS Static RAM. Feature: Low power consumption Fast access time High speed Low voltage operation High reliability Low power dissipation Low noise

Stock:10000

Minimum:2

Favorite

XC2S100E-6TQ144C

Enlarge

Original parts, guaranteed brand new

XC2S100E-6TQ144C

TQFP144

Xilinx

1345+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

AU $20.43127

AU $18.38814

≥50:

AU $20.23668

AU $18.21301

≥100:

AU $19.45835

AU $17.51251

From: AU $19.45835

Stock:5000

Minimum:1

Favorite

XC9536XL-5VQG44C

Enlarge

Original parts, guaranteed brand new

XC9536XL-5VQG44C

TQFP44

Xilinx

15+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

AU $4.52631

AU $4.07368

≥50:

AU $4.40058

AU $3.96052

≥100:

AU $4.19103

AU $3.77193

From: AU $4.19103

Stock:10000

Minimum:1

Favorite

LM2596HVS-5.0

Enlarge

Used and refurbished parts guaranteed can work well

LM2596HVS-5.0

TO-263

National Semiconductor

06+

SIMPLE SWITCHER Power Converter 150 kHz 3A Step-Down Voltage Regulator

Utsource

≥1:

AU $1.77920

AU $1.60128

≥5:

AU $1.33440

AU $1.20096

≥10:

AU $0.80064

AU $0.72057

≥20:

AU $0.77840

AU $0.70056

≥50:

AU $0.75616

AU $0.68054

≥100:

AU $0.73392

AU $0.66053

≥200:

AU $0.71168

AU $0.64051

≥500:

AU $0.70279

AU $0.63251

≥1000:

AU $0.68944

AU $0.62049

From: AU $0.68944

Description: The LM2596HVS-5.0 is a monolithic integrated circuit in a TO-263 (NS) package. It is a step-down switching regulator with an adjustable output voltage of 5.0V. Features: Output voltage

Stock:10000

Minimum:2

Favorite

W25Q256JVFIQ

Enlarge

Original parts, guaranteed brand new

W25Q256JVFIQ

SOP16

Winbond

17+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

AU $9.83609

AU $8.85248

≥5:

AU $9.34428

AU $8.40986

≥10:

AU $8.85248

AU $7.96723

≥20:

AU $8.60658

AU $7.74592

≥50:

AU $8.36067

AU $7.52461

≥100:

AU $8.11477

AU $7.30330

≥200:

AU $7.86887

AU $7.08198

≥500:

AU $7.77051

AU $6.99346

≥1000:

AU $7.62297

AU $6.86067

From: AU $7.62297

Stock:10000

Minimum:1

Favorite

ULN2001D1013TR

Enlarge

Original parts, guaranteed brand new

ULN2001D1013TR

SOP16

STMicroelectronics

09+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥5:

AU $0.35923

AU $0.32331

≥100:

AU $0.32930

AU $0.29637

≥500:

AU $0.29936

AU $0.26942

From: AU $0.29936

Description: ULN2001D1013TR is a 16-pin SOP (Small Outline Package) Darlington Transistor Array manufactured by STMicroelectronics. Features: High voltage and current capability Low saturation vol

Stock:10000

Minimum:10

Favorite

VO615A-4X007T

Enlarge

Original parts, guaranteed brand new

VO615A-4X007T

SOP4

Vishay Siliconix

12+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥5:

AU $0.35923

AU $0.32331

≥100:

AU $0.32930

AU $0.29637

≥500:

AU $0.29936

AU $0.26942

From: AU $0.29936

Description: Optocoupler, Phototransistor Output, 4-Channel, 4.7 kVrms, 5.2 mA, SOP-4 Features: 4-channel phototransistor output 4.7 kVrms isolation voltage 5.2 mA CTR min. @ IF = 5 mA Low input c

Stock:10000

Minimum:10

Favorite

WM8728SEDS/RV

Enlarge

Original parts, guaranteed brand new

WM8728SEDS/RV

SSOP-20

Wolfson

2010+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

AU $2.56594

AU $2.30934

≥5:

AU $1.71062

AU $1.53956

≥10:

AU $1.53956

AU $1.38561

≥20:

AU $1.49680

AU $1.34712

≥50:

AU $1.45403

AU $1.30863

≥100:

AU $1.41126

AU $1.27014

≥200:

AU $1.36850

AU $1.23165

≥500:

AU $1.35139

AU $1.21625

≥1000:

AU $1.32573

AU $1.19316

From: AU $1.32573

Stock:10000

Minimum:3

Favorite

LM2576HVT-ADJ

Enlarge

Used and refurbished parts guaranteed can work well

LM2576HVT-ADJ

TO-220

National Semiconductor

SIMPLE SWITCHER 3A Step-Down Voltage Regulator

Utsource

≥1:

AU $2.83089

AU $2.54780

≥5:

AU $1.88726

AU $1.69853

≥10:

AU $1.69853

AU $1.52868

≥20:

AU $1.65136

AU $1.48622

≥50:

AU $1.60417

AU $1.44375

≥100:

AU $1.55698

AU $1.40128

≥200:

AU $1.50981

AU $1.35883

≥500:

AU $1.49093

AU $1.34184

≥1000:

AU $1.46263

AU $1.31637

From: AU $1.46263

Description: The LM2576HVT-ADJ is a monolithic integrated circuit that provides all the active functions for a step-down (buck) switching regulator, capable of driving a 3A load with excellent line an

Stock:10000

Minimum:2

Favorite

Z86E0812SSG1866

Enlarge

Original parts, guaranteed brand new

Z86E0812SSG1866

SOP18

Zilog

10+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

AU $3.29295

AU $2.96366

≥50:

AU $3.14327

AU $2.82894

≥100:

AU $2.99359

AU $2.69423

From: AU $2.99359

Description: The Z86E0812SSG1866 is an 8-bit microcontroller from Zilog. It has a 12MHz clock frequency, 8K bytes of Flash, 256 bytes of RAM, and 18 I/O lines. Features: 8-bit Zilog Z86E08 microcont

Stock:10000

Minimum:2

Favorite

XC9572XL-5VQ64C

Enlarge

Original parts, guaranteed brand new

XC9572XL-5VQ64C

QFP64

Xilinx

08+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

AU $8.00786

AU $7.20707

≥50:

AU $7.78334

AU $7.00501

≥100:

AU $7.48398

AU $6.73558

From: AU $7.48398

Stock:10000

Minimum:1

Favorite

UC3856N

Enlarge

Original parts, guaranteed brand new

UC3856N

DIP16

UNI

96+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

AU $4.20300

AU $3.78270

≥50:

AU $4.08625

AU $3.67763

≥100:

AU $3.89167

AU $3.50250

From: AU $3.89167

Description: The UC3856N is a high performance current mode PWM controller. Features: Operating voltage range of 8V to 40V Current mode control Low start-up current Internal soft start Programma

Stock:10000

Minimum:1

Favorite

VPP1552BFG

Enlarge

Original parts, guaranteed brand new

VPP1552BFG

BGA

Integrated Device Technology

1248+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

AU $14.59675

AU $13.13708

≥50:

AU $14.32134

AU $12.88921

≥100:

AU $13.77052

AU $12.39347

From: AU $13.77052

Description: IDT VPP1552BFG is a high-performance, low-power, low-skew clock fanout buffer. Features: Low-skew output Low-power consumption High-performance Outputs: 2 Inputs: 1 Supply Voltage:

Stock:5000

Minimum:1

Favorite

UP1707S

Enlarge

Original parts, guaranteed brand new

UP1707S

SOP8

UPI

13+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥3:

AU $1.07769

AU $0.96992

≥50:

AU $0.98789

AU $0.88910

≥100:

AU $0.89808

AU $0.80827

From: AU $0.89808

Description: UP1707S is a high-efficiency, low-cost, low-power, low-dropout linear regulator. Feature: 1. Output voltage accuracy: ±2% 2. Output current: up to 1A 3. Low dropout voltage: 0.2V (typical

Stock:10000

Minimum:4

Favorite

Alternate Text
Alternate Text

Currency:

Alternate Text Alternate Text Alternate Text

Product New Used

Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company

Alternate Text Stock

Non-Stock

Non-Stock

Toll-Free Call

(888) 766 5577 USA & Canada

+52 5515436027
+52 5515436028 Mexico

+49 6931090199 Germany

+55 21 3609 8727 Brazil

(800) 137235 Italy

(900) 649657 Spain

Whatsapp

+1 (312) 899-4831 USA

+49 15217848563 Germany

+52 55 7637 4368 Mexico

Email

sales@utsource.com

GLOBAL PAYMENTS

Global logistics

footShip
Copyright © 2022 Power by UTSOURCE INTERNATIONAL LIMITED ISO/IEC 20000-1:2011,ISO/IEC 27001:2013 鄂ICP备2021003526号-1