≥1:
C$0.96048
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Package: SOP-14 Manufacturer: NS/FSC Description: The 74ACT74 is a dual D-type flip-flop with individual data, set, reset, and clock inputs, and complementary Q and Q outputs. Features: High speed:
Stock:10000
Minimum:5
Favorite
DIP14
Texas Instruments
07+
These devices contain two independent D-type positive-edge-triggered flip-flops. A low level at the preset or clear inputs sets or resets the outputs regardless of the levels of the other inputs. When preset and clear are inactive (high), data at the D input meeting the setup time requirements are transferred to the outputs on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not directly related to the rise time of the clock pulse. Following the hold time interval, data at the D input may be changed without affecting the levels at the outputs. The SN54' family is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74' family is characterized for operation from 0°C to 70°C.
SN74LS74AN is a dual positive-edge triggered D-type flip-flop with individual data (D) and clock (CP) inputs. It is a 14-pin dual in-line package (DIP) manufactured by Texas Instruments. Description:
Stock:10000
Minimum:3
Favorite
Description: The CD4013BCN is a dual D-type flip-flop with set and reset. Features: Set and reset Clock inhibit Low power consumption High noise immunity High speed operation High
Stock:10000
Minimum:4
Favorite
Description: The SN74LS76AN is a dual J-K flip-flop with set and reset inputs. Features: - Wide supply voltage range: 3V to 15V - Low power consumption - High speed operation - High noise immunity -
Stock:10000
Minimum:2
Favorite
Stock:150
Minimum:100
Favorite
Stock:235
Minimum:100
Favorite
DIP
Texas Instruments
01+
LMC7101 Tiny Low Power Operational Amplifier with Rail-To-Rail Input and Output; Package: SOT-23; No of Pins: 5
Stock:10000
Minimum:1
Favorite
Favorite
DIP-14
National Semiconductor
93+
Dual D-Type Positive Edge-Triggered Flip-Flop; Package: DIP; No of Pins: 14; Container: Rail
Description: The 74F74PC is a dual D-type flip-flop with a positive-edge trigger. Features: High speed Low power consumption Outputs source/sink 24 mA Inputs compatible with TTL levels Outputs
Stock:10000
Minimum:3
Favorite
Description: Dual JK Flip-Flop Features: - Low power Schottky TTL (LSTTL) - Inputs compatible with standard TTL outputs - Outputs source/sink 24 mA - Typical propagation delay: 8 ns - Typical p
Stock:10000
Minimum:1
Favorite
SN74HC175N is a Quad D-type flip-flop IC with a DIP-16 package manufactured by Texas Instruments. It is a high-speed CMOS logic device that is designed for low-power operation. Description: The SN74H
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:2
Favorite
Description: Dual D-Type Flip-Flop with Set and Reset Features: -Wide supply voltage range: 2.0V to 6.0V -High noise immunity -Low power consumption -Typical tpd = 10ns -Inputs accept voltages
Stock:10000
Minimum:13
Favorite
Description: The 74HC574D is an 8-bit D-type flip-flop with 3-state outputs from NXP Semiconductors. Features: High-speed operation: tpd = 10 ns (typical) at VCC = 5 V Low power consumption: I
Stock:10000
Minimum:4
Favorite
Description: Dual D-Type Flip-Flop with Preset and Clear Features: - High-speed operation - Low power consumption - Inputs accept voltages up to 5.5V - Outputs source/sink 24mA - Outputs compatible wi
Stock:331
Minimum:26
Favorite
Stock:10000
Minimum:16
Favorite
DIP-16
Motorola
99+
Hex D-Type Master-Slave Flip-Flop; Package: PDIP-16; No of Pins: 16; Container: Rail; Qty per Container: 25
Stock:10000
Minimum:2
Favorite
Description: Dual D-Type Flip-Flop Features: - High-Speed Operation - Low Power Consumption - Outputs Source/Sink 24 mA - 5V Tolerant Inputs - CMOS Compatible Inputs - Outputs Directly Interfa
Stock:10000
Minimum:5
Favorite
Stock:10000
Minimum:2
Favorite
Description: Octal D-Type Flip-Flop with Clear Features: High-speed: tpd = 8.3 ns (typical) at VCC = 5 V Low power consumption: ICC = 4 μA (maximum) at Ta = 25°C Fully static operation Synchronous
Stock:10000
Minimum:3
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company