TDA7575B The TDA7575B is a new MOSFET dual bridge amplifier specially intended for car radio applications. Thanks to the DMOS output stage the TDA7575B has a very low distortion allowing a clear powerful sound.
Among the features, its superior efficiency performance coming from the internal exclusive structure, makes it the most suitable device to simplify the thermal management in high power sets.The dissipated output power under average listening condition is in fact reduced up to 50% when compared to the level provided by conventional class AB solutions. This device is equipped with a full diagnostic array that communicates the status of each speaker through the I2C bus. The TDA7575B has also the possibility of driving loads down to 1? paralleling the outputs into a single channel. It is also possible to disable the I2C and control the TDA7575B by means of the usual standby and mute pins.

Sales：8

113521

5.0 out of 5 stars

1 star 0.3%

2 star 0%

3 star 0.2%

4 star 0.4%

5 star 99.1%

Total products: 2398063

Total sales: 12735602

Average lead time: 0 Hour

Delivery times (Express): 0

Delivery times (Post office): 0

Favorite

TDA7575B

USED

Utsource certified used parts

Utsource certified used parts provide the following guarantees:

1. Utsource will inspect the goods, including appearance inspection (no serious damage to the appearance), select qualified and honest suppliers, and ensure 98% qualification rate.

2. Some parts are tested by machine.

3. Utsource certified parts can be returned and refunded unconditionally within 60 days.

Description

The TDA7575B is a new MOSFET dual bridge amplifier specially intended for car radio applications. Thanks to the DMOS output stage the TDA7575B has a very low distortion allowing a clear powerful sound. Among the features, its superior efficiency performance coming from the internal exclusive structure, makes it the most suitable device to simplify the thermal management in high power sets.The dissipated output power under average listening condition is in fact reduced up to 50% when compared to the level provided by conventional class AB solutions. This device is equipped with a full diagnostic array that communicates the status of each speaker through the I2C bus. The TDA7575B has also the possibility of driving loads down to 1? paralleling the outputs into a single channel. It is also possible to disable the I2C and control the TDA7575B by means of the usual standby and mute pins.

Not found, similar datasheet recommended

Title

Differential input, high efficiency (class SB) dual BTL output with full I2C diagnostics, clip detection, stand-by and mute inputs

ECAD Module
Series: -
Brand: STMicroelectronics
Package / Case: SSOP36
Packaging: Tube
Part Status: Active
Type: Class AB
Output Type: 1-Channel (Mono) or 2-Channel (Stereo)
Max Output Power x Channels @ Load: 150W x 1 @ 1 Ohm; 75W x 2 @ 2 Ohm
Voltage - Supply: 8 V ~ 18 V
Features: Differential Inputs, I2C, Mute, Short-Circuit and Thermal Protection, Standby
Mounting Type: Through Hole
Operating Temperature: -55°C ~ 150°C (TJ)
Supplier Device Package: 27-Flexiwatt (Vertical)

All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

ECAD Module

Product Attributes

Description: 4-Channel Audio Processor Features: - 4-channel audio processor - Low power consumption - High signal-to-noise ratio - Low distortion - Low external component count - High stability - Low cost Application: The TDA7575B is a 4-channel audio processor designed for automotive audio applications. It can be used in car audio systems, home audio systems, and other audio systems. It is suitable for applications such as equalization, bass boost, and treble boost. (For reference only)

Preview of the first 3 pages of the data sheet

Document Preview

x 75W multifunction dual-bridge power amplifier with integrated digital diagnostics
Features

Multipower bcd technology MOSFET output power stage DMOS power output New high-efficiency (class AB) Single-channel 1driving capability High output power capability W/4 @

V, 1 kHz, 10 % THD Max. output power 1x150 W/1 Single-channel 1 driving capability 84 W undistorted power Full I2C bus driving with 4 address possibilities:

Standby Play/mute Gain dB Full digital diagnostic (AC and DC loads) Possibility to disable the I2C bus Differential inputs Full fault protection DC offset detection Two independent short circuit protections Diagnostic on clipping detector with selectable threshold Clipping detector as diagnostic pin when I2C bus is disabled Standby/mute pins ESD protection

Description

The is a new MOSFET dual bridge amplifier specially intended for car radio applications. Thanks to the DMOS output stage the TDA7575B has a very low distortion allowing a clear powerful sound.

Among the features, its superior efficiency performance coming from the internal exclusive structure, makes it the most suitable device to simplify the thermal management in high power sets.The dissipated output power under average listening condition is in fact reduced to 50% when compared to the level provided by conventional class AB solutions.

This device is equipped with a full diagnostic array that communicates the status of each speaker through the I2C bus. The TDA7575B has also the possibility of driving loads down to 1 paralleling the outputs into a single channel. It is also possible to disable the I2C and control the TDA7575B by means of the usual standby and mute pins.

Table 1. Table 2. Table 3. Table 4. Table 5. Table 6. Table 7. Table 8. Table 9. Table 10. Table 11.

Device summary. 1 Absolute maximum ratings. 6 Thermal data. 6 Electrical characteristics. 6 Address selection. DB2. 21 Double fault table for turn-on diagnostic. 28 Document revision history. 31

Related products with the same datasheet

VIPER31

Energy Saving Off-line High Voltage Converter.

TSV621A

Rail-to-rail input/output 5V CMOS Op-Amp, micro-power (29uA), GBP=420kHz, small offset, single. Package : SC70-5,SOT23-5L, Grade : Industrial, Number of Channels : 1, Operating Temperature min : -40°C,

TS985

Micropower low-voltage rail-to-rail comparator. Package : WLCSP MSL1, Grade : Industrial, Number of Channels : 1, Operating Temperature min : -40°C,

TDA7294

100 V, 100 W DMOS audio amplifier with mute and standby. Package : MW 15L, Supply Voltage min : 10V, Supply Voltage max : 40V, Supply Mode : split, Output Channels

STF40NF06

N-CHANNEL 60V 0.024 Ohm 23A TO-220FP STRIPFET II MOSFET. Package : TO-220FP, VDSS : 60V, RDS(on) max : 0.028Ω, Drain Current (Dc) max : 23A, P_TOT

STL7LN65K5AG

Automotive-grade N-channel 650 V, 0.95 Ohm typ., 5 A, MDmesh K5 Power MOSFET in a PowerFLAT 5x6 VHV package. Package : PowerFLAT 5x6 VHV, VDSS : 650V, RDS(on) max : 1.15Ω, Drain Current (Dc) max : 5A, P_TOT

STL7DN6LF3

Automotive-grade dual N-channel 60 V, 35 mOhm typ., 6.5 A STripFET F3 Power MOSFET in PowerFLAT 5x6 double island package. Package : PowerFLAT 5x6 double island WF, VDSS : 60V, RDS(on) max : 0.06Ω, RDS(on) max : 0.043Ω,

VND810P-E

Standard Functions, High Side Switches. Number of Channels nom : 2, Technology : M0-3, RDS(on) typ : 160mΩ, Package : SO-16, Supply Voltage

L99PM62GXP

Power Management IC with LIN and high speed CAN. Operating Voltage min : 6V, Operating Voltage max : 18V, V_OUT typ : 5V @ 250mA - 5V @ 100 mAV,

TDA75613LV

Low voltage operation, high efficiency (class SB), intelligent, quad BTL output power amplifier with speaker safety routine (SSR), full I2C diagnostics including tweeter detection and hardware stand-by/mute. Package : FLEXIWATT FM2 27, Number of Channels nom : 4, Gain Capability (dB) : 30 / 16, Output Power

Some Part number from the same manufacture

TDA7496

5 W + 5 W amplifier with DC volume control.

TDA7293

120 V / 100 W DMOS audio amplifier with mute and standby.

TDA7498

100W+100W dual BTL Class-D audio amplifier.

TDA7492MV

50W Mono BTL class-D audio amplifier.

TS4994

1 W differential input/output audio power amplifier with selectable standby.

TS4890

1W mono audio amplifier with standby active low.

TDA7562B

Intelligent quad BTL output power amplifier with full I2C diagnostics (permanent and ac) and stand-by/mute input.

TDA7802

Low voltage operation, digital input (I2S), improved high efficiency (class SB-I) quad BTL output power amplifier with full I2C diagnostics.

TDA7388

Quad BTL output power amplifier with stand-by and mute.

FDA802

2x150 W - 1x300 W class-D digital input power amplifier with diagnostics features and low voltage operation.

Same catergory

MC34119P

IC AMP CLASS AB MONO 400MW 8DIP

LM386MX-1/NOPB

IC AMP CLASS AB MONO 325MW 8SOIC

STA508

IC AMP AUDIO PWR 160W POWERSO36

PAM8406DR

IC AMP D/AB STEREO 5W 16SOP

MAX9813LEKA+T

IC AMP CLASS AB MONO SOT23-8

LM384N

IC AMP CLASS AB MONO 5.5W 14DIP

NJM2073D

IC AMP CLSS AB MONO/STER 2W 8DIP

LM386N-3

IC AMP CLASS AB MONO 700MW 8DIP

Product Reviews

Submit

282 buyer reviews from Canada

Pavlo Tereshin

TDA7575B

Moldova Tiraspol

Length of registration:12 years

All OK. Thanks

Reply0

03/10/2020

See all reviews >>

Payment Method

European payment method

Asia payment method

America payment method

International payment method

Shopping process

Search on the website

Send an inquiry
Add to Cart

Add to inquiry cart

Quote
Place Order
Goods warehousing

Package

Ship order out

Latest shipping video More

Shopping Guide Related Search Related Supplier Alternate Names

Shopping Guide

Order

Users could add parts to cart and upload BOM when they searching parts, calculate cost in a second, offer you the best bill of materials.
Some specific products need to reach the minimum order quantity.
Users could get coupons randomly when they applied plus member. Utsource offers different buying options with different product quality from different seller stores when placing orders.
Users could add products to“inquiry cart" and submit your inquiry, utsource will send quotation email to you.
If you need add additional order instructions like Tax Invoice or Remark, please put them on the ordering information page.
All order information could be checked in your "account center"page
Please confirm the product description when placing order.
The order can’t be canceled after shipment, so please email customer service to revise order details before shipment.
Utsource Mobile browser version and APP could be downloaded to find parts anytime, anywhere if needed.
Please choose right language and currency to place order if needed.

Payment

UTSOURCE supports global payments, including mainstream US PAYPAL, credit cards (VISA, MASTERCARD, AMERICAN EXPRESS, JCB), WEST UNION, Moneygram;
Popular payment in Europe: SofortBanking, Trustpay, Paysafecard;
Middle East: CashU, Onecard;
Southeast Asia : MOLPay;
Russia commonly used: Qiwi, Yandex Money, WebMoney;
The Dutch payment: iDEAL, Polish Dotpay,
Brazilian payment: Boleto
These above payments have a high market share in the local area with better payment experience, simpler payment method.

Shipping

USPS, FedEx, DHL, and UPS could be selected.
Express: (FEDEX, UPS, DHL, TNT)Free shipping on first 0.5kg for orders over 200$, Overweight will be charged separately.
It is available for users to select "Freight Collect"depending on their requirement
It may cost additional remote fees for delivery if you are in a remote area.
Shipping price for your order will be calculated automatically in the shopping cart.If you have any questions about shipping costs, you can write to us and we will confirm it manually.
For in-stock parts, orders normally could be shipped out within 1-2days.
Delivery date: usually 2 to 5 working days.
Shipping Tracking Number will be sent by email or you can go to APP or website "account center" to check once your order has been shipped.
Invoice could be downloaded from "account center" > "my invoice" if needed

Gift Coupon/Plus service

You could receive US $5 shipping coupon (applicable to new users)
Offer 30-day PLUS free trial service( The plus service will be stopped automatically after the end of the trial, and no extra charge will be generated. Commodity prices are usually reduced by 10%)
“Funds account” could be used for your next order purchase If you have money that has been returned to your “Funds account”. (You could check it in “My Account” > “Funds account” )
Utsource offers professional customer service worldwide in USA, Mexico, Brazil, Italy, France, Germany and many other places.

Returning

Returns are normally accepted when completed within 60 days from the date of the parcel delivered.

Defective ( Please provide a third party quality report of nonconforming products)

Return Freight charges must be prepaid; we will not accept COD shipments.

Warranty

All UTSOURCE purchases have a 60 days money back return policy, plus a 90 days UTSOURCE warranty against any manufacturing defects.This warranty shall not apply to any item where defects have been caused by improper customer assembly, failure by customer to follow instructions, product modification, negligent or improper operation.

Related Search

TDA7575B Price
TDA7575B Pdf
TDA7575B Hard to find
TDA7575B Pinout
TDA7575B Obsolete
TDA7575B Image
TDA7575B Buy
TDA7575B Picture
TDA7575B Sell
TDA7575B In Stock
TDA7575B Search
TDA7575B Distributor
TDA7575B Datasheet
TDA7575B New&Original
TDA7575B Application
TDA7575B Series
TDA7575B Replacement
TDA7575B TI(STMicroelectronics)
TDA7575B find
TDA7575B purchase
TDA7575B need
TDA7575B shopping
TDA7575B store
TDA7575B Cheap
TDA7575B transistor
TDA7575B equivalent
TDA7575B Electronic Component
TDA7575B The TDA7575B is a new MOSFET dual bridge amplifier specially intended for car radio applications. Thanks to the DMOS output stage the TDA7575B has a very low distortion allowing a clear powerful sound. Among the features, its superior efficiency performance coming from the internal exclusive structure, makes it the most suitable device to simplify the thermal management in high power sets.The dissipated output power under average listening condition is in fact reduced up to 50% when compared to the level provided by conventional class AB solutions. This device is equipped with a full diagnostic array that communicates the status of each speaker through the I2C bus. The TDA7575B has also the possibility of driving loads down to 1? paralleling the outputs into a single channel. It is also possible to disable the I2C and control the TDA7575B by means of the usual standby and mute pins.

Related Supplier

Part Number Seller's Name Stock Brand Package/Case Date Code Description Price

Alternate Names

TDA7575B

TDA7575B has several brands around the world that may have alternate names for TDA7575B due to regional differences or acquisition. TDA7575B may also be known as the following names: