≥1:
US $11.82400
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Home > Elec-component > IC Chips > Data Acquisition - Digital to Analog Converters (DAC)
CDIP-16
Analog Devices
03+
The AD558 DACPORT? is a complete voltage-output 8-bit digital-to-analog converter, including output amplifier, full microprocessor interface and precision voltage reference on a single monolithic chip. No external components or trims are required to interface, with full accuracy, an 8-bit data bus to an analog system. The performance and versatility of the DACPORT is a result of several recently-developed monolithic bipolar technologies. The complete microprocessor interface and control logic is implemented with integrated injection logic (I2 L), an extremely dense and low power logic structure that is process-compatible with linear bipolar fabrication. The internal precision voltage reference is the patented low voltage bandgap circuit which permits full-accuracy performance on a single +5 V to +15 V power supply. Thin-film silicon-chromium resistors provide the stability required for guaranteed monotonic operation over the entire operating temperature range (all grades), while recent advances in laser-wafer-trimming of these thin-film resistors permit absolute calibration at the factory to within ±1 LSB; thus no user-trims for gain or offset are required. A new circuit design provides voltage settling to ±1/2 LSB for a full-scale step in 800 ns. The AD558 is available in four performance grades. The AD558J and K are specified for use over the 0°C to +70°C temperature range, while the AD558S and T grades are specified for -55°C to +125°C operation. The "J" and "K" grades are available either in 16-pin plastic (N) or hermetic ceramic (D) DIPS. They are also available in 20-pin JEDEC standard PLCC packages. The "S" and "T" grades are available in the 16-pin hermetic ceramic DIP package. DACPORT is a registered trademark of Analog Devices, Inc.
Description: The AD558SD is a monolithic, low power, high accuracy, quad voltage-output, 12-bit digital-to-analog converter (DAC). Features: Low Power: 1.5 mW/Channel at +5 V High Accuracy: 0.02% Ma
Stock:5000
Minimum:1
Favorite
DIP-14
Microchi
MCP4922 is a dual channel, 12-bit DAC with an external voltage reference and SPI interface. It offers high accuracy and low power consumption and is available in various packages. The MCP4922 device is a part of the MCP4902/MCP4912/MCP4922 product family, which are dual channel 8-bit/10-bit/12-bit DACs which use external voltage reference (VREF). These devices provide very high accuracy and low noise performance, and are suitable for consumer and industrial applications, such as set point control, offset adjustment and sensor calibration applications. The low power consumption and small package options make these devices very attractive for many portable and battery-powered applications. If one output is needed then the MCP4901/4911/4921 single channel product family can be used.
The MCP4922-E/P is a dual, 12-bit voltage output Digital-to-Analog Converter (DAC) with an integrated, volatile memory. It has an SPI serial interface, which allows for easy interface to all common mi
Stock:5000
Minimum:1
Favorite
DIP-16
National Semiconductor
The DAC0808LCN is a 8-bit monolithic Digital-to-analogue Converter features a full scale output current settling time of 150ns while dissipating only 33mW with ±5V supplies. No reference current (IREF) trimming is required for most applications since the full scale output current is typically ±1 LSB of 255 IREF/256. Relative accuracies of better than ±0.19% assure 8-bit monotonicity and linearity while zero level output current of less than 4μA provides 8-bit zero accuracy for IREF >=2mA. The power supply current of the DAC0808 is independent of bit codes and exhibits essentially constant device characteristics over the entire supply voltage range. The DAC will interface directly with popular TTL, DTL or CMOS logic levels.
Description: The DAC0808LCN is an 8-bit Digital-to-Analog Converter (DAC) manufactured by Texas Instruments. Features: 8-bit resolution Low power consumption Low cost TTL/CMOS compatible inpu
Stock:10000
Minimum:2
Favorite
Manufacturer: Maxim Integrated Description: 8-Bit Serial-Input, Voltage-Output DAC Features: 8-Bit Resolution Low Power Consumption: 5.5mW Serial Interface Low Cost Single-Supply Operation
Stock:5000
Minimum:1
Favorite
Stock:10000
Minimum:1
Favorite
MSOP8
Analog Devices
06+
12-bit, 500 MSPS Analog-to-Digital Converter with Buffered Input 80-HTQFP
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:2
Favorite
Description: The AD7244 is a low power, low noise, 16-bit, successive approximation analog-to-digital converter (ADC). Features: 16-bit resolution Low power: 1.2 mW at 3 V Low noise: 0.7 μV RMS L
Stock:5000
Minimum:1
Favorite
DIP-16
Maxim Integrated
08+
Calibrated, Quad, 12-Bit Voltage-Output DACs with Serial Interface
Stock:2000
Minimum:1
Favorite
Manufacturer: Maxim Integrated Description: 8-Bit, Serial-Input, Voltage-Output Digital-to-Analog Converter Features: 8-Bit Resolution Serial-Input Interface Voltage Output Low Power Consumption
Stock:2000
Minimum:1
Favorite
SOP-24
Maxim Integrated
0635/
Galibrated Quad 12-Bit Voltage-Output D/A Converters
Description: 8-Bit, Voltage Output, Digital-to-Analog Converter Features: - 8-bit resolution - ±2 LSB max integral nonlinearity - Low power consumption: 1.2 mW (typ) - Low output noise: 0.2 mV p-p (ty
Stock:2000
Minimum:1
Favorite
The AD558JN is a monolithic, low power, dual operational amplifier from Analog Devices. It is a dual, low power, high speed, low noise, precision operational amplifier with a wide range of features an
Stock:10000
Minimum:1
Favorite
LQFP-48
Analog Devices
330MHz Triple 8-Bit High Speed Video DAC; Package: LQFP; No of Pins: 48; Temperature Range: Industrial
The ADV7125KSTZ50 is a high-performance, low-power, triple 8-bit video digital-to-analog converter (DAC) from Analog Devices. It is designed to provide high-quality video output from digital video sou
Stock:10000
Minimum:1
Favorite
Stock:2000
Minimum:1
Favorite
DIP-24
Burr-Browm
04/
Dual Monolithic CMOS 12-Bit Multiplying Digital-to-Analog Converter
Stock:2000
Minimum:1
Favorite
SOP-14
Maxim Integrated
0625/
+5V, Low-Power, Voltage-Output, Serial 12-Bit DACs
Stock:5000
Minimum:1
Favorite
DIP-28
Burr-Browm
0523+
Microprocessor-Compatible 12-Bit Digital-to-Analog Converter
Description: The DAC811JP is a monolithic CMOS 8-bit digital-to-analog converter (DAC) with a voltage output. Features: - 8-bit resolution - Low power consumption - Low output impedance - Low voltage
Stock:5000
Minimum:1
Favorite
Description: 8-Bit, Serial-Input, Voltage-Output Digital-to-Analog Converter Features: 8-Bit Resolution Serial-Input Interface Voltage Output Low Power Consumption: 5 mW Low Cost Low Offset Erro
Stock:10000
Minimum:1
Favorite
Description: 8-Bit Serial-Input, Voltage-Output DAC Features: - 8-bit resolution - Serial-input data format - Voltage output - Low power consumption - Low cost - Low temperature coefficient - Single-
Stock:5000
Minimum:1
Favorite
Stock:2000
Minimum:1
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company