Logik - Puffer, Treiber, Empfänger, Transceiver

Dual Supply Octal Translating Transceiver; Package: 24 LEAD TSSOP; No of Pins: 24; Container: Rail; Qty per Container: 62

Dual 4-Bit Non-Inverting Buffer/Driver

The LVT162244 and LVTH162244 contain sixteen non-inverting buffers with 3-STATE outputs designed to be employed as a memory and address driver, clock driver, or bus oriented transmitter/receiver. The device is nibble controlled. Individual 3-STATE control inputs can be shorted together for 8-bit or 16-bit operation. The LVT162244 and LVTH162244 are designed with equivalent 25ohm series resistance in both the HIGH and LOW states of the output. This design reduces line noise in applications such as memory address drivers, clock drivers, and bus transceivers/transmitters. The LVTH162244 data inputs include bushold, eliminating the need for external pull-up resistors to hold unused inputs. These buffers and line drivers are designed for low-voltage (3.3V) VCC applications, but with the capability to provide a TTL interface to a 5V environment. The LVT162244 and LVTH162244 are fabricated with an advanced BiCMOS technology to achieve high speed operation similar to 5V ABT while maintaining a low power dissipation.

OCTAL BUS TRANSCEIVERS AND REGISTERS

Quad buffer/line driver; 3-state - Description: Quad Buffer/Line Driver with Active LOW Output Enable; TTL Enabled 3-State ; Logic switching levels: TTL ; Number of pins: 14 ; Output drive capability: +/- 6 mA ; Power dissipation considerations: Low Power ; Propagation delay: 12 ns; Voltage: 4.5-5.5V; Package: SOT402-1 TSSOP14; Container: Reel Pack, SMD, 13"

Octal buffer/line driver; 3-state - Description: Buffer/Line Driver; Non-Inverting 3-State ; Logic switching levels: CMOS ; Number of pins: 20 ; Output drive capability: +/- 8 mA ; Power dissipation considerations: Low Power or Battery Applications ; Propagation delay: 3.5@5V ns; Voltage: 2.0-5.5 V; Package: SOT163-1 SO20; Container: Tape reel smd

8-Bit Non-Inverting Buffer/Driver

OCTAL BUFFER/DRIVER WITH OPEN-COLLECTOR OUTPUTS

IC BUFFER INVERT 15V 20SOIC

Octal Buffer/Line Driver with 3-STATE Outputs Inverting; Package: SOIC-Wide; No of Pins: 20; Container: Rail

Octal 3-STATE Transceiver

OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

Quad Noninverting Buffer, 3 State; Package: SOIC 14 LEAD; No of Pins: 14; Container: Tape and Reel; Qty per Container: 2500

Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs; Package: TSSOP; No of Pins: 20; Container: Tape & Reel

Octal buffer, line driver; 3-state - Description: Octal Buffer/Line Driver; Non-Inverting 3-State ; Logic switching levels: CMOS ; Number of pins: 20 ; Output drive capability: +/- 7.8 mA ; Power dissipation considerations: Low Power or Battery Applications ; Propagation delay: 9@5V ns; Voltage: 2.0-6.0 V; Package: SOT163-1 SO20; Container: Reel Pack, SMD, 13", CECC

Low Voltage Bidirectional Transceiver with 5V Tolerant Inputs and Outputs; Package: TSSOP; No of Pins: 20; Container: Tape & Reel

Low Voltage Buffer/Line Driver with 5V Tolerant Inputs and Outputs with 26W Series Resistors in the Outputs

Octal 3-STATE Buffers; Package: SOIC-Wide; No of Pins: 20; Container: Tape & Reel

Octal bus transceiver with direction pin with 5 V tolerant inputs/outputs 3-state - Description: 3.3V Transceiver with Direction Pin; Non-Inverting 3-State ; Logic switching levels: TTL ; Number of pins: 20 ; Output drive capability: +/- 24 mA ; Power dissipation considerations: Low Power or Battery Applications ; Propagation delay: 2.9 @ 3.3V ns; Voltage: 1.2-3.6; Package: SOT360-1 TSSOP20; Container: Reel Pack, SMD, 13"

General Purpose, 1 Form A, Solid State Relay Photo MOSFET, 60V/0.6A/1Ω