IC-Chips

Digitale integrierte Schaltkreise der Serie 74

Digitale integrierte Schaltungen der Serie CD40

Optische Koppler

Uhren- und Rechner-ICs

Operationelle Verstärker

Netzschalter Ics

Treiber Ics

Flash-Speicher

Speicher

Audio-Sonderzweck

Uhr/Timing - Anwendungsspezifisch

Uhr/Timing - Uhrenpuffer, Treiber

Takt/Timing - Taktgeneratoren, PLLs, Frequenzsynthesizer

Uhr/Timing - Verzögerungsleitungen

Uhr/Timing - IC-Batterien

Uhr/Timing - Programmierbare Zeitgeber und Oszillatoren

Uhr/Uhrzeit - Echtzeituhren

Datenerfassung - ADCs/DACs - Spezieller Zweck

Datenerfassung - Analoges Front-End (AFE)

Datenerfassung - Analog-Digital-Wandler (ADC)

Datenerfassung - Digitale Potentiometer

Datenerfassung - Digital-Analog-Wandler (DAC)

Datenerfassung - Touchscreen-Steuerungen

Eingebettet - CPLDs (Komplexe programmierbare Logikbausteine)

Eingebettet - DSP (Digitale Signalprozessoren)

Eingebettet - FPGAs (Field Programmable Gate Array)

Eingebettet - FPGAs (Field Programmable Gate Array) mit Mikrocontrollern

Eingebettet - Mikrocontroller, Mikroprozessor, FPGA-Module

Eingebettet - Mikrocontroller

Eingebettet - Mikrocontroller - Anwendungsspezifisch

Eingebettet - Mikroprozessoren

Eingebettete - PLDs (Programmable Logic Device)

Eingebettet - System On Chip (SoC)

Schnittstelle - Analogschalter - Spezialzweck

Schnittstelle - Analogschalter, Multiplexer, Demultiplexer

Schnittstelle - CODECs

Schnittstelle - Controller

Schnittstelle - Direkte digitale Synthese (DDS)

Schnittstelle - Treiber, Empfänger, Transceiver

Schnittstelle - Encoder, Decoder, Konverter

Schnittstelle - Filter - Aktiv

Schnittstelle - E/A-Expander

Schnittstelle - Modems - ICs und Module

Schnittstelle - Module

Schnittstelle - Sensor- und Detektor-Schnittstellen

Schnittstelle - Sensor, kapazitive Berührung

Schnittstelle - Serialisierer, Deserialisierer

Schnittstelle - Signalpuffer, Repeater, Splitter

Schnittstelle - Signalabschlusswiderstände

Schnittstelle - Spezialisiert

Schnittstelle - Telekommunikation

Schnittstelle - UARTs (Universal Asynchronous Receiver Transmitter)

Schnittstelle - Sprachaufzeichnung und -wiedergabe

Linear - Verstärker - Audio

Linear - Verstärker - Instrumentierung, OP-Verstärker, Pufferverstärker

Linear - Verstärker - Spezialzweck

Linear - Verstärker - Videoverstärker und -module

Lineare - Analoge Multiplikatoren, Dividierer

Linear - Komparatoren

Linear - Videoverarbeitung

Logik - Puffer, Treiber, Empfänger, Transceiver

Logik - Komparatoren

Logik - Zähler, Dividierer

Logik - FIFO-Speicher

Logik - Flip-Flops

Logik - Tore und Umkehrer

Logik - Tore und Wechselrichter - Multifunktion, konfigurierbar

Logik - Verriegelungen

Logik - Multivibratoren

Logik - Paritätsgeneratoren und Prüfer

Logik - Schieberegister

Logik - Signalumschalter, Multiplexer, Decoder

Logik - Fachgebietslogik

Logik - Übersetzer, Level-Shifter

Logik - Universalbus-Funktionen

Speicher - Batterien

Speicher - Konfigurationsprogramme für FPGAs

Speicher - Controller

PMIC - AC-DC-Wandler, Offline-Schalter

PMIC - Batterieladegeräte

PMIC - Batterie-Management

PMIC - Aktuelle Regulierung/Verwaltung

PMIC - Anzeige-Treiber

PMIC - Energiemessung

PMIC - Volle, halbe Brückentreiber

PMIC - Gate-Treiber

PMIC - Hot-Swap-Steuerungen

PMIC - Laser-Treiber

PMIC - LED-Treiber

PMIC - Beleuchtung, Vorschaltgerätesteuerungen

PMIC - Motortreiber, Steuerungen

PMIC - OR-Steuerungen, ideale Dioden

PMIC - PFC (Leistungsfaktor-Korrektur)

PMIC - Stromverteilungsschalter, Lasttreiber

PMIC - Energieverwaltung - Spezialisiert

PMIC - Power-over-Ethernet (PoE)-Steuerungen

PMIC - Stromversorgungs-Controller, Monitore

PMIC - RMS-DC-Wandler

PMIC - Aufsichtsbehörden

PMIC - Thermisches Management

PMIC - V/F- und F/V-Wandler

PMIC - Spannungs-Referenz

PMIC - Spannungsregler - DC-Schalt-Controller

PMIC - Spannungsregler - DC-Schaltregler - DC-Schaltregler

PMIC - Spannungsregler - Linear

PMIC - Spannungsregler - Linear + Schalten

PMIC - Spannungsregler - Lineare Regler Regler

PMIC - Spannungsregler - Spezieller Zweck

Spezialisierte ICs

Module

IGBT

IPM

Thyristoren

Gleichrichter

Die Stromversorgung

Intelligentes Leistungsmodul

SCR,GTO und Diode

FET

Darlington-Transistoren

RF-Module

CNC-PRODUKTE

ENCODER

Motor

Servoantrieb & Verstärker & Servo

Dioden-Modul

Transistor-Modul

Schalter-Relais

PLC

Wechselrichter

Schütz und Unterbrecher

Aufzug-Brett

Industrielle Steuerung

Bipolartransistoren

Diode

Bipolare Transistoren

Widerstände

Kohlefilmwiderstände

Zementwiderstände

Chassis Mount-Widerstände

Chassis Mount-Widerstände

Strommesswiderstände

Schmelzbarer Chip-Widerstand

Hochpräzise & Low TCR SMD Widerstände

Hochspannungswiderstand

LED-Streifenwiderstände

MELF-Widerstand

Metalllegierungswiderstände

Metallfilm-Widerstand (TH)

Metall-Lasur-Widerstände

Metalloxidschichtwiderstände

Metalloxidwiderstände

NTC-Thermistoren

PTC-Thermistoren

Photoresistoren

Potentiometer & variable Widerstände

Präzisions-Potentiometer

Widerstandsnetzwerke & -anordnungen

Widerstandsnetzwerke und -arrays (TH)

Ultra-Niederwiderstände (SMD)

Variable Widerstände

Varistoren

Drahtgewickelte Widerstände

Kondensatore

Aluminium-Elektrolyt-Kondensatoren - SMD

CL21 Kondensator

Keramische Scheibenkondensatoren

Hochspannungskondensatoren

Metallisierter Polyesterfolienkondensator

Mehrschichtige Keramikkondensatoren MLCC - Bedrahtet

Mehrschichtige Keramikkondensatoren MLCC - SMD/SMT

Mylar-Kondensator

Nioboxid-Kondensatoren

Polyester-Filmkondensatoren

Solid Polymer Elektrolytkondensator

Superkondensatoren & Ultrakondensatoren

Entstörkondensatoren

Tantalkondensatoren

Trimmer, variable Kondensatoren

Induktivitäten

Antennen

Stromwandler

Allgemeine Induktoren (TH)

HF-Induktoren

Induktoren (SMD)

Leitungsfilter

Leistungsinduktoren

Leistungstransformator

RJ45 Transformator

Radialer Induktor (TH)

Die kreisförmigen Induktoren

Quarze Oszillatoren

49S

49SMD

49U

Keramische Resonatoren

DIP-Oszillatoren (XO)

Radialzylinderkristalle

SAW-Resonatoren

SMD-Kristalle

SMD-Oszillatoren (XO)

Steckverbinder

AV-Anschlüsse

Audio- und Videoanschlüsse

Bananen- und Spitzenanschlüsse

Kartenrandverbinder

Rundsteckverbinder

Steckverbinder - Kartensteckplätze

Steckverbinder

Steckverbinder - Zubehör

Steckverbinder - Gehäuse

Kontakte

D-Sub-Steckverbinder

Ethernet-Steckverbinder/Modularsteckverbinder

FFC, FPC (Flat Flexible) Steckverbinder

Lichtwellenleiter-Steckverbinder

IC- und Komponentensockel

LED-Lichtleiter

Mezzanine-Steckverbinder (Board to Board)

Leiterplattensteckverbinder - Stiftleisten, Stecker und Pins

Leiterplattensteckverbinder - Stiftleisten, Buchsen, Buchsen, Buchsenleisten

Leiterplattensteckverbinder - Gehäuse

Leistungssteckverbinder

HF-Steckverbinder/Koaxialsteckverbinder

Shunts & Jumper

Reihenklemmen - Zubehör

Reihenklemmen - Barriereklemmen

Reihenklemmen - DIN-Schiene, Kanal

Anschlussklemmen - Stiftleisten, Stecker und Buchsen

Terminals

Testclips

Prüfpunkte/Testringe

USB-Anschlüsse

Nicht spezifizierte Steckverbinder

Schraubverdrahtung

Federverdrahtung

Steckbare Reihenklemmen

Durchwandklemmen

Kfz-Terminals

Klemmengehäuse, Isolierhülsen und -blöcke

Schnelltrenn-Kabelverbinder und -klemmen

Ersatz- und Verschleißwerkzeuge

Kfz-Steckverbinder

Leiterplattensteckverbinder

anmelden

3. Unter "Account Center" -> "Meine Anfragen" können Sie den Status ihrer Anfragen prüfen.

Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.

Ich nehme alle Bedingungen und Bestimmungen von UTSOURCE an.,Datenschutz
Agree Later abgeben

Delivery Address

Alternate Text

+ Adresse hinzufügen

Bestätigen

neue Frachtadresse

*Land/Region :
*Emfänger :
*Mobiltelefon:
+

* Bitte geben Sie die Handynummer korrekt ein, um sicherzustellen, dass Sie die Tracking-Informationen rechtzeitig erhalten.

Ländercode
*Straße :
*Stadt :
Provinz/Bundesland :
*Provinz/Bundesland :
*PLZ :
Please enter a new 5-digit zip code..
Firmenname :
abbrechen
abgeben

Operationelle Verstärker

Filters:
clear
Alternate Text
Menge der betroffenen Produkte: 9262
Alternate Text Utsource
UA710HC

Enlarge

Original parts, guaranteed brand new

UA710HC

CAN-8

FSC

88+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

€2.98780

€2.68902

≥50:

€2.90480

€2.61432

≥100:

€2.76648

€2.48983

From: €2.76648

Description: UA710HC is a monolithic operational amplifier manufactured by Fairchild Semiconductor. Features: Wide common-mode (up to VCC +) and differential voltage range Low power consumption Hi

Lagerbestand:10000

Mindestbestellmenge:1

Favorit

TLC2274ACD

Enlarge

Used and refurbished parts guaranteed can work well

TLC2274ACD

SOP-14

Texas Instruments

06+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource

≥1:

€2.32544

€2.09289

≥5:

€1.55029

€1.39526

≥10:

€1.39526

€1.25574

≥20:

€1.35651

€1.22085

≥50:

€1.31775

€1.18597

≥100:

€1.27899

€1.15109

≥200:

€1.24023

€1.11621

≥500:

€1.22473

€1.10226

≥1000:

€1.20148

€1.08133

From: €1.20148

Description: The TLC2274ACD is a low-power, high-speed, quad operational amplifier. Features: Low supply current of 0.9 mA/amplifier Low input offset voltage of 0.8 mV High gain bandwidth product

Lagerbestand:10000

Mindestbestellmenge:2

Favorit

W29N01GVSIAA

Enlarge

Original parts, guaranteed brand new

W29N01GVSIAA

TSOP48

Winbond

15+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

€2.39024

€2.15121

≥50:

€2.32384

€2.09146

≥100:

€2.21318

€1.99186

From: €2.21318

Description: W29N01GVSIAA is a 1 Gb (128M x 8 bit) Flash Memory manufactured by Winbond. Features: Low voltage operation: 2.7V to 3.6V Fast read access time: 55/60/70/80/90/100/120/133/150/166/200/2

Lagerbestand:10000

Mindestbestellmenge:1

Favorit

VX1937

Enlarge

Original parts, guaranteed brand new

VX1937

TQFP

Vxis

09+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

€5.92026

€5.32823

≥50:

€5.75427

€5.17884

≥100:

€5.53295

€4.97966

From: €5.53295

VX1937 is a TQFP (Thin Quad Flat Pack) package from VXIS. It is a high-speed, low-power, low-voltage, 32-bit RISC microcontroller. It is designed for embedded applications such as automotive, industri

Lagerbestand:10000

Mindestbestellmenge:1

Favorit

Z0853606VSC

Enlarge

Original parts, guaranteed brand new

Z0853606VSC

PLCC44

Zilog

97+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

€4.34152

€3.90737

≥50:

€4.21980

€3.79782

≥100:

€4.05750

€3.65175

From: €4.05750

Description: Z0853606VSC is a PLCC44 Zilog microcontroller. Features: The Z0853606VSC has a 16-bit Z80 CPU core, 64Kbytes of on-chip ROM, 64Kbytes of on-chip RAM, and a wide range of peripherals incl

Lagerbestand:10000

Mindestbestellmenge:1

Favorit

UCC3806N

Enlarge

Original parts, guaranteed brand new

UCC3806N

DIP16

UNI

96+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

€5.26948

€4.74253

≥5:

€5.00601

€4.50541

≥10:

€4.74253

€4.26828

≥20:

€4.61080

€4.14972

≥50:

€4.47906

€4.03115

≥100:

€4.34732

€3.91259

≥200:

€4.21558

€3.79403

≥500:

€4.16289

€3.74660

≥1000:

€4.08385

€3.67546

From: €4.08385

Description: The UCC3806N is a high-performance, current-mode, fixed frequency, pulse-width modulation (PWM) controller with an integrated high-side MOSFET driver. Features: - High-side MOSFET driver

Lagerbestand:10000

Mindestbestellmenge:1

Favorit

WS628128LLPG-70

Enlarge

Original parts, guaranteed brand new

WS628128LLPG-70

DIP

Wingshing

11+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

€1.42012

€1.27811

≥50:

€1.35557

€1.22002

≥100:

€1.29102

€1.16192

From: €1.29102

Description: This is a 128K x 8 bit low power CMOS Static RAM. Feature: Low power consumption Fast access time High speed Low voltage operation High reliability Low power dissipation Low noise

Lagerbestand:10000

Mindestbestellmenge:2

Favorit

XC2S100E-6TQ144C

Enlarge

Original parts, guaranteed brand new

XC2S100E-6TQ144C

TQFP144

Xilinx

1345+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

€12.58747

€11.32872

≥50:

€12.46759

€11.22083

≥100:

€11.98807

€10.78926

From: €11.98807

Lagerbestand:5000

Mindestbestellmenge:1

Favorit

XC9536XL-5VQG44C

Enlarge

Original parts, guaranteed brand new

XC9536XL-5VQG44C

TQFP44

Xilinx

15+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

€2.78861

€2.50975

≥50:

€2.71115

€2.44003

≥100:

€2.58205

€2.32384

From: €2.58205

Lagerbestand:10000

Mindestbestellmenge:1

Favorit

LM2596HVS-5.0

Enlarge

Used and refurbished parts guaranteed can work well

LM2596HVS-5.0

TO-263

National Semiconductor

06+

SIMPLE SWITCHER Power Converter 150 kHz 3A Step-Down Voltage Regulator

Utsource

≥1:

€1.09614

€0.98653

≥5:

€0.82211

€0.73990

≥10:

€0.49326

€0.44394

≥20:

€0.47956

€0.43161

≥50:

€0.46586

€0.41927

≥100:

€0.45216

€0.40694

≥200:

€0.43846

€0.39461

≥500:

€0.43298

€0.38968

≥1000:

€0.42476

€0.38228

From: €0.42476

Description: The LM2596HVS-5.0 is a monolithic integrated circuit in a TO-263 (NS) package. It is a step-down switching regulator with an adjustable output voltage of 5.0V. Features: Output voltage

Lagerbestand:10000

Mindestbestellmenge:2

Favorit

W25Q256JVFIQ

Enlarge

Original parts, guaranteed brand new

W25Q256JVFIQ

SOP16

Winbond

17+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

€6.05990

€5.45391

≥5:

€5.75691

€5.18122

≥10:

€5.45391

€4.90852

≥20:

€5.30241

€4.77217

≥50:

€5.15092

€4.63583

≥100:

€4.99942

€4.49948

≥200:

€4.84792

€4.36313

≥500:

€4.78732

€4.30859

≥1000:

€4.69642

€4.22678

From: €4.69642

Lagerbestand:10000

Mindestbestellmenge:1

Favorit

ULN2001D1013TR

Enlarge

Original parts, guaranteed brand new

ULN2001D1013TR

SOP16

STMicroelectronics

09+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥5:

€0.22132

€0.19919

≥100:

€0.20287

€0.18259

≥500:

€0.18443

€0.16599

From: €0.18443

Description: ULN2001D1013TR is a 16-pin SOP (Small Outline Package) Darlington Transistor Array manufactured by STMicroelectronics. Features: High voltage and current capability Low saturation vol

Lagerbestand:10000

Mindestbestellmenge:10

Favorit

VO615A-4X007T

Enlarge

Original parts, guaranteed brand new

VO615A-4X007T

SOP4

Vishay Siliconix

12+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥5:

€0.22132

€0.19919

≥100:

€0.20287

€0.18259

≥500:

€0.18443

€0.16599

From: €0.18443

Description: Optocoupler, Phototransistor Output, 4-Channel, 4.7 kVrms, 5.2 mA, SOP-4 Features: 4-channel phototransistor output 4.7 kVrms isolation voltage 5.2 mA CTR min. @ IF = 5 mA Low input c

Lagerbestand:10000

Mindestbestellmenge:10

Favorit

WM8728SEDS/RV

Enlarge

Original parts, guaranteed brand new

WM8728SEDS/RV

SSOP-20

Wolfson

2010+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

€1.58084

€1.42276

≥5:

€1.05390

€0.94851

≥10:

€0.94851

€0.85366

≥20:

€0.92216

€0.82994

≥50:

€0.89581

€0.80623

≥100:

€0.86946

€0.78252

≥200:

€0.84312

€0.75881

≥500:

€0.83258

€0.74932

≥1000:

€0.81677

€0.73509

From: €0.81677

Lagerbestand:10000

Mindestbestellmenge:3

Favorit

LM2576HVT-ADJ

Enlarge

Used and refurbished parts guaranteed can work well

LM2576HVT-ADJ

TO-220

National Semiconductor

SIMPLE SWITCHER 3A Step-Down Voltage Regulator

Utsource

≥1:

€1.74408

€1.56967

≥5:

€1.16272

€1.04645

≥10:

€1.04645

€0.94180

≥20:

€1.01738

€0.91564

≥50:

€0.98831

€0.88948

≥100:

€0.95924

€0.86331

≥200:

€0.93017

€0.83716

≥500:

€0.91855

€0.82669

≥1000:

€0.90111

€0.81100

From: €0.90111

Description: The LM2576HVT-ADJ is a monolithic integrated circuit that provides all the active functions for a step-down (buck) switching regulator, capable of driving a 3A load with excellent line an

Lagerbestand:10000

Mindestbestellmenge:2

Favorit

Z86E0812SSG1866

Enlarge

Original parts, guaranteed brand new

Z86E0812SSG1866

SOP18

Zilog

10+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

€2.02875

€1.82587

≥50:

€1.93653

€1.74288

≥100:

€1.84432

€1.65989

From: €1.84432

Description: The Z86E0812SSG1866 is an 8-bit microcontroller from Zilog. It has a 12MHz clock frequency, 8K bytes of Flash, 256 bytes of RAM, and 18 I/O lines. Features: 8-bit Zilog Z86E08 microcont

Lagerbestand:10000

Mindestbestellmenge:2

Favorit

XC9572XL-5VQ64C

Enlarge

Original parts, guaranteed brand new

XC9572XL-5VQ64C

QFP64

Xilinx

08+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

€4.93355

€4.44020

≥50:

€4.79523

€4.31570

≥100:

€4.61080

€4.14972

From: €4.61080

Lagerbestand:10000

Mindestbestellmenge:1

Favorit

UC3856N

Enlarge

Original parts, guaranteed brand new

UC3856N

DIP16

UNI

96+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

€2.58942

€2.33048

≥50:

€2.51749

€2.26574

≥100:

€2.39761

€2.15785

From: €2.39761

Description: The UC3856N is a high performance current mode PWM controller. Features: Operating voltage range of 8V to 40V Current mode control Low start-up current Internal soft start Programma

Lagerbestand:10000

Mindestbestellmenge:1

Favorit

VPP1552BFG

Enlarge

Original parts, guaranteed brand new

VPP1552BFG

BGA

Integrated Device Technology

1248+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥1:

€8.99289

€8.09361

≥50:

€8.82322

€7.94090

≥100:

€8.48386

€7.63548

From: €8.48386

Description: IDT VPP1552BFG is a high-performance, low-power, low-skew clock fanout buffer. Features: Low-skew output Low-power consumption High-performance Outputs: 2 Inputs: 1 Supply Voltage:

Lagerbestand:5000

Mindestbestellmenge:1

Favorit

UP1707S

Enlarge

Original parts, guaranteed brand new

UP1707S

SOP8

UPI

13+

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/μs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions. The TLC227x family of devices, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 μV. This family is fully characterized at 5 V and ±5 V. The TLC227x also make great upgrades to the TLC27x in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211, TLV2221 and TLV2231 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high density, battery-powered equipment.

Utsource Original Store

≥3:

€0.66395

€0.59756

≥50:

€0.60862

€0.54776

≥100:

€0.55330

€0.49797

From: €0.55330

Description: UP1707S is a high-efficiency, low-cost, low-power, low-dropout linear regulator. Feature: 1. Output voltage accuracy: ±2% 2. Output current: up to 1A 3. Low dropout voltage: 0.2V (typical

Lagerbestand:10000

Mindestbestellmenge:4

Favorit

Alternate Text
Alternate Text

Währung:

Alternate Text Alternate Text Alternate Text

Produkt Neu gebraucht

Stoppen Sie die Produktionsexperten. Wir können eine große Anzahl elektronischer Komponenten bereitstellen, deren Produktion eingestellt wurde und die schwer zu finden sind, um das Wartungsunternehmen zu unterstützen

Alternate Text Lagerbestand

Kein Inventar

Kein Inventar

Kostenloser Anruf

(888) 766 5577 USA & Kanada

+52 5515436027
+52 5515436028 Mexiko

+49 6931090199 Deutschland

+55 21 3609 8727 Brasilien

(800) 137235 Italien

(900) 649657 Spanien

Whatsapp

+1 (312) 899-4831 USA

+49 15217848563 Deutschland

+52 55 7637 4368 Mexiko

Email

sales@utsource.com

GLOBALER ZAHLUNGSVERKEHR

Globale logistik

footShip
Copyright © 2022 Power by UTSOURCE INTERNATIONAL LIMITED ISO/IEC 20000-1:2011,ISO/IEC 27001:2013 鄂ICP备2021003526号-1