Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country Code
Favorite
Utsource certified used parts
Utsource certified used parts provide the following guarantees:
1. Utsource will inspect the goods, including appearance inspection (no serious damage to the appearance), select qualified and honest suppliers, and ensure 98% qualification rate.
2. Some parts are tested by machine.
3. Utsource certified parts can be returned and refunded unconditionally within 60 days.
Description
The AD7730L is a complete analog front end for weigh-scale and pressure measurement applications. The device accepts low-level signals directly from a transducer and outputs a serial digital word. The input signal is applied to a proprietary programmable gain front end based around an analog modulator. The modulator output is processed by a low pass programmable digital filter, allowing adjustment of filter cutoff, output rate and settling time. The part features two buffered differential programmable gain analog inputs as well as a differential reference input. The device operates from a single +5 V supply. It accepts four unipolar analog input ranges: 0 mV to +10 mV, +20 mV, +40 mV and +80 mV and four bipolar ranges: ±10 mV, ±20 mV, ±40 mV and ±80 mV. The peak-to-peak resolution achievable directly from the part is 1 in 110,000 counts. An on-chip 6-bit DAC allows the removal of TARE voltages. Clock signals for synchronizing ac excitation of the bridge are also provided. The serial interface on the part can be configured for three-wire operation and is compatible with microcontrollers and digital signal processors. The AD7730L contains self-calibration and system calibration options, and features an offset drift of less than 5 nV/°C and a gain drift of less than 3 ppm/°C. The part is available in a 24-lead SOIC and 24-lead TSSOP package. It is a lower power version of the AD7730 (approximately 1/3 the power).
All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
Preview of the first 3 pages of the data sheet
Document Preview
KEY FEATURES Resolution of 230,000 Counts (Peak-to-Peak) Offset Drift: 5 nV/C Gain Drift: 2 ppm/C Line Frequency Rejection: >150 dB Buffered Differential Inputs Programmable Filter Cutoffs Specified for Drift Over Time Operates with Reference Voltages 5 V
ADDITIONAL FEATURES Two-Channel Programmable Gain Front End On-Chip DAC for Offset/TARE Removal FASTStepTM Mode or DC Excitation Single Supply Operation
GENERAL DESCRIPTION The is a complete analog front end for weigh-scale and pressure measurement applications. The device accepts lowlevel signals directly from a transducer and outputs a serial digital word. The input signal is applied to a proprietary programmable gain front end based around an analog modulator.
The modulator output is processed by a low pass programmable digital filter, allowing adjustment of filter cutoff, output rate and settling time.
The part features two buffered differential programmable gain analog inputs as well as a differential reference input. The part operates from a single +5 V supply. It accepts four unipolar analog input ranges: to +10 mV, +20 mV, +40 mV and +80 mV and four bipolar ranges: ± 10 mV, ± 20 mV, 40 mV and ± 80 mV. The peak-to-peak resolution achievable directly from the part in 230,000 counts. An on-chip 6-bit DAC allows the removal of TARE voltages. Clock signals for synchronizing ac excitation of the bridge are also provided.
The serial interface on the part can be configured for three-wire operation and is compatible with microcontrollers and digital signal processors. The AD7730 contains self-calibration and system calibration options, and features an offset drift of less than 5 nV/°C and a gain drift of less than 2 ppm/°C.
The AD7730 is available a 24-pin plastic DIP, a 24-lead SOIC and 24-lead TSSOP package. The AD7730L is available a 24-lead SOIC and 24-lead TSSOP package.
NOTE The description of the functions and operation given in this data sheet apply to both the AD7730 and AD7730L. Specifications and performance parameters differ for the parts. Specifications for the AD7730L are outlined in Appendix A.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
AD7730SPECIFICATIONS (AVDD +5 V, DVDD +5 V; REF IN(+) = AVDD; REF IN() = AGND = DGND 0 V; fCLK = 4.9152 MHz. All specifications TMIN to TMAX unless otherwise noted.)
STATIC PERFORMANCE (CHP 1) No Missing Codes2 Output Noise and Update Rates2Integral Nonlinearity Offset Error2 Offset Drift vs. Temperature2 Offset Drift vs. Time4 Positive Full-Scale Error2, 5 Positive Full-Scale Drift 6, 7 Positive Full-Scale Drift vs Time4 Gain Error2, 8 Gain Drift vs. 6, 9 Gain Drift vs. Time4 Bipolar Negative Full-Scale Error2 Negative Full-Scale Drift vs. Temp2, 6
Common-Mode Rejection (CMR) Analog Input DC Bias Current2 Analog Input DC Bias Current Drift2 Analog Input DC Offset Current2 Analog Input DC Offset Current Drift2
Offset Error Offset Drift vs. Temperature6 Offset Drift vs. Time4 Positive Full-Scale Error5 Positive Full-Scale Drift vs. Temp6, 7 Positive Full-Scale Drift vs. Time4 Gain Error8 Gain Drift vs. Temperature6, 9 Gain Drift vs. Time4
Reference Input REF IN(+) REF IN() Voltage REF IN(+) REF IN() Voltage Absolute/Common-Mode Voltage13
Offset Error and Offset Drift Refer to Both Unipolar Offset and Bipolar Zero ErrorsMeasured with Zero Differential Voltage At DC. Measured with Zero Differential Voltage At DC. Measured with Zero Differential Voltage
From 51 Hz From 61 Hz From 51 Hz From 61 Hz Assuming 5 V Reference with HIREF Bit Set Appropriately Gain = 250 Gain = 125 Gain = 62.5 Gain = 31.25
HIREF Bit of Mode Register = 0 HIREF Bit of Mode Register 1 NO REF Bit Active If VREF Below This Voltage NO REF Bit Inactive If VREF Above This Voltage
LOGIC INPUTS Input Current All Inputs Except SCLK and MCLK IN VINL, Input Low Voltage VINL, Input Low Voltage VINH, Input High Voltage SCLK Only (Schmitt Triggered Input) VT+ VT VT+ VT VT+ VT MCLK IN Only VINL, Input Low Voltage VINL, Input Low Voltage VINH, Input High Voltage VINH, Input High Voltage
LOGIC OUTPUTS (Including MCLK OUT) VOL, Output Low VoltagePOWER REQUIREMENTS Power Supply Voltages AVDD AGND Voltage DVDD Voltage Power Supply Currents AVDD Current (Normal Mode) AVDD Current (Normal Mode) DVDD Current (Normal Mode) DVDD Current (Normal Mode) AVDD + DVDD Current (Standby Mode) Power Dissipation Normal Mode
DVDD +5 V DVDD +3 V DVDD +5 V DVDD +3 V DVDD +5 V DVDD +3 V DVDD +5 V DVDD +3 V DVDD +5 V DVDD +3 VISINK 800 A Except for MCLK +5 V ISINK 100 A Except for MCLK +3 V ISOURCE 200 A Except for MCLK +5 V ISOURCE 100 A Except for MCLK +3 V
With AGND 0 V External MCLK. Digital I/Ps V or DVDD All Input Ranges Except +10 mV and 10 mV Input Ranges +10 mV and 10 mV Only DVDD 3.3 V DVDD 5.25 V Typically 10 A. External MCLK V or DVDD AVDD = DVDD +5 V. Digital I/Ps V or DVDD All Input Ranges Except +10 mV and 10 mV Input Ranges +10 mV and 10 mV Only Typically 50 W. External MCLK V or DVDD
Some Part number from the same manufacture
Same catergory
222 buyer reviews from India
RAMASWAMY
Length of registration:9 years
Wow, I see many people help give proposals to u, Utsource is really good to offer electronic components. as far as I know, e-nergie buys electronic components from Utsource and put those components into their unique kits, which is very convenient for engineers to pick out the values they want to have.
0
0
Reply0
10/12/2022
SHREE ENTERPRISES (GSTIN 06ABPPV6429E1Z8)
Length of registration:7 years
Very satisfied with
0
0
Reply0
09/24/2021
suresh nair
Length of registration:7 years
satisfied
0
0
Reply0
04/04/2017
N.T.SIVA PANDIAN
Length of registration:14 years
good
0
0
Reply0
03/17/2017
Rakesh Dhanani
Length of registration:7 years
your product is very good and original i am happy for your product
0
0
Reply0
01/31/2017
SILICON ENGINEERS
Length of registration:8 years
good
0
0
Reply0
12/12/2016
Tijo jose
Length of registration:7 years
thanks for timely delivery
0
0
Reply0
11/28/2016
Terence Rosario
Length of registration:11 years
Good
0
0
Reply0
11/04/2016
Teena Nicholson
Length of registration:9 years
Excellent service, reasonable price
0
0
Reply0
11/02/2016
Amit Pandeya
Length of registration:7 years
Best place to buy electronic componenets
0
0
Reply0
08/18/2016
European payment method
Asia payment method
America payment method
International payment method
Latest shipping video More
Order
Payment
Shipping
Gift Coupon/Plus service
Returning
Returns are normally accepted when completed within 60 days from the date of the parcel delivered.
Defective ( Please provide a third party quality report of nonconforming products)
Return Freight charges must be prepaid; we will not accept COD shipments.
Warranty
All UTSOURCE purchases have a 60 days money back return policy, plus a 90 days UTSOURCE warranty against any manufacturing defects.This warranty shall not apply to any item where defects have been caused by improper customer assembly, failure by customer to follow instructions, product modification, negligent or improper operation.
AD7730LBRZ
AD7730LBRZ has several brands around the world that may have alternate names for AD7730LBRZ due to regional differences or acquisition. AD7730LBRZ may also be known as the following names:
BUYING OPTIONS
Country:
United States
Express:(FEDEX, UPS, DHL, TNT)Free shipping on first 0.5kg for orders over 200$,Overweight will be charged separately
JudyCustomer Manager
sales@utsource.com
(888) 766 5577
+86 15302769052
+1 (312)899-4831
(whatsapp only)
Your dedicated customer service, providing you the best service at any time.
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company
Reply to
submit