≥1:
¥101.00000
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ アドレスの追加
新運送先
*追跡情報を時間内に受信できるように、携帯電話番号を正しく入力してください。
国コード検索結果フィルタ:
ホーム > 電子コンポーネント > ICチップ > ロジック-フリップフロップ
Description: The CD4013BCN is a dual D-type flip-flop with set and reset. Features: Set and reset Clock inhibit Low power consumption High noise immunity High speed operation High
在庫:10000
最小数量:4
お気に入り
TSSOP14
PH2
The 74HC74PW is a dual positive edge-trigger D-type Flip-flop with set and reset. It has individual data (nD), clock (nCP), set (nSD\) and reset (nRD\) inputs and complementary nQ and nQ\ outputs. Data at the nD-input, that meets the set-up and hold time requirements on the low-to-high clock transition, is stored in the flip-flop and appears at the nQ output. Schmitt-trigger action in the clock input, makes the circuit highly tolerant to slower clock rise and fall times. Inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Description: Dual D-Type Flip-Flop with Preset and Clear Features: Wide supply voltage range: 2.0 V to 6.0 V Inputs accept voltages up to 6.0 V Outputs source/sink 24 mA Low power consumption
在庫:10000
最小数量:3
お気に入り
在庫:10000
最小数量:4
お気に入り
Description: The 74ACTQ18823SSC is a high-speed CMOS octal bus transceiver featuring non-inverting 3-state outputs and is designed for 2.7V to 3.6V VCC operation. Features: - High-speed operation: tp
在庫:5000
最小数量:1
お気に入り
TSSOP14
FSC
MR, Active low P-P internal pullup, Active high P-P, -40C to +125C, 5-SOT-23, T/R
在庫:10000
最小数量:3
お気に入り
DIP
Texas Instruments
01+
LMC7101 Tiny Low Power Operational Amplifier with Rail-To-Rail Input and Output; Package: SOT-23; No of Pins: 5
在庫:10000
最小数量:1
お気に入り
在庫:10000
最小数量:2
お気に入り
在庫:10000
最小数量:1
お気に入り
DIP-20
National Semiconductor
Octal D Flip-Flop with 3-STATE Outputs; Package: DIP; No of Pins: 20; Container: Rail
在庫:10000
最小数量:2
お気に入り
DIP20
Ns/fsc
Quad Buffer with 3-STATE Outputs; Package: SOIC; No of Pins: 14; Container: Rail
在庫:10000
最小数量:3
お気に入り
Description: The DM7474N is a dual negative-edge triggered D-type flip-flop with independent data, set, and reset inputs. Features: High-Speed Performance: tPD = 10 ns (typical) Low Power Cons
在庫:10000
最小数量:2
お気に入り
SOP-14
Ns/fsc
1.5 A 280kHz/560kHz Boost Regulators; Package: SOIC-8 Narrow Body; No of Pins: 8; Container: Rail; Qty per Container: 98
Description: The MM74HC74AM is a dual D-type flip-flop with set and reset inputs. It is a high-speed, low-power, dual-in-line CMOS device. Features: High-speed operation Low-power consumption High
在庫:10000
最小数量:3
お気に入り
Description: The MM74C74N is a dual D-type flip-flop with individual data, set, reset, and clock inputs and Q and Q outputs. Features: Positive-edge triggered Individual data, set, reset, and cloc
在庫:10000
最小数量:3
お気に入り
DIP-14
National Semiconductor
86+
Small Signal Bias Resistor Transistor SC75 PNP 50V; Package: SC-75 SOT-416 3 LEAD; No of Pins: 3; Container: Tape and Reel; Qty per Container: 3000
Description: The MM74HCT74N is a dual D-type flip-flop with individual data, set, reset and clock inputs and complementary outputs. Features: High Speed Operation Low Power Consumption High Noise
在庫:10000
最小数量:3
お気に入り
DIP-16
Texas Instruments
500mA, 5V,±2% Tolerance, Voltage Regulator, Ta = 0°C to +125°C; Package: DPAK 4 LEAD Single Gauge Surface Mount; No of Pins: 4; Container: Tape and Reel; Qty per Container: 2500
Description: Dual J-K Flip-Flop Features: - Inputs Include Clocks, Set, Reset, and Direct Clear - Outputs Source/Sink 24 mA - Fanout of 10 LSTTL Loads - Balanced Propagation Delay and Transition Times
在庫:10000
最小数量:5
お気に入り
SN74HC175N is a Quad D-type flip-flop IC with a DIP-16 package manufactured by Texas Instruments. It is a high-speed CMOS logic device that is designed for low-power operation. Description: The SN74H
在庫:10000
最小数量:2
お気に入り
Description: The MC14013BDG is a dual D-type flip-flop with set and reset. Features: - Low power consumption - Inputs are TTL compatible - Outputs are open collector - Set and reset inputs - Outputs
在庫:10000
最小数量:3
お気に入り
在庫:10000
最小数量:2
お気に入り
Description: Dual D-Type Flip-Flop with Set and Reset Features: -Wide supply voltage range: 2.0V to 6.0V -High noise immunity -Low power consumption -Typical tpd = 10ns -Inputs accept voltages
在庫:10000
最小数量:13
お気に入り
Manufacturer: IDT Description: Octal D-Type Flip-Flop Features: High Speed: tPD = 10 ns (typical) at VCC = 5 V Low Power Consumption: ICC = 4 μA (max) at TA = 25°C Wide Operating Voltage Range: VCC
在庫:10000
最小数量:2
お気に入り
生産の専門家を停止し、生産を停止し、見つけるのが難しい多数の電子部品を提供し、メンテナンス会社を促進することができます