≥1:
Mex $58.85338
¡Hola! Acceder o Registrarse
APP Manual de datos Transmisión en vivo 290K likes UtsourceComprar(0)
Pida su cotización(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Añadir dirección
Nueva dirección de transporte
* Por favor, complete el número de teléfono celular correctamente para asegurarse de que puede recibir la información de seguimiento a tiempo.
Código de paísFiltro de resultados de busqueda:
Inicio > Componentes Electrónicos > Chips IC > Interfaz -controladores,receptores, tranceptores.
Depósito:10000
Mínimo:1
Favorita
SOP-8
ADI
1035+
The ADM1485 is a differential line transceiver suitable for high speed bidirectional data communication on multipoint bus transmission lines. It is designed for balanced data transmission and complies with both EIA Standards RS-485 and RS-422. The part contains a differential line driver and a differential line receiver. Both the driver and the receiver may be enabled independently. When disabled, the outputs are tristated. The ADM1485 operates from a single +5 V power supply. Excessive power dissipation caused by bus contention or by output shorting is prevented by a thermal shutdown circuit. This feature forces the driver output into a high impedance state if during fault conditions a significant temperature increase is detected in the internal driver circuitry. Up to 32 transceivers may be connected simultaneously on a bus, but only one driver should be enabled at any time. It is important therefore that the remaining disabled drivers do not load the bus. To ensure this, the ADM1485 driver features high output impedance when disabled and also when powered down. This minimizes the loading effect when the transceiver is not being utilized. The high impedance driver output is maintained over the entire common-mode voltage range from -7 V to +12 V. The receiver contains a fail safe feature which results in a logic high output state if the inputs are unconnected (floating). The ADM1485 is fabricated in BiCMOS, an advanced mixed technology process combining low power CMOS with fast switching bipolar technology. All inputs and outputs contain protection against ESD; all driver outputs feature high source and sink current capability. An epitaxial layer is used to guard against latch-up. The ADM1485 features extremely fast switching speeds. Minimal driver propagation delays permit transmission at data rates up to 30 Mbits/s while low skew minimizes EMI interference. The part is fully specified over the commercial and industrial temperature range and is available in an 8-pin DIL/SOIC package.
Manufacturer: Analog Devices Package: SOP-8 Description: The ADM1485ARZ is a low-power, low-voltage, differential line transceiver designed for RS-485 and RS-422 communication. Features: Low power
Depósito:10000
Mínimo:2
Favorita
Depósito:10000
Mínimo:1
Favorita
SOIC
Maxim Integrated
RS-485 Single Transmitters/Receivers, 5V, MAX13xxx and MAX14xx Series, Maxim Integrated
Depósito:10000
Mínimo:2
Favorita
Depósito:10000
Mínimo:2
Favorita
Depósito:10000
Mínimo:3
Favorita
Depósito:10000
Mínimo:1
Favorita
Depósito:10000
Mínimo:1
Favorita
Depósito:10000
Mínimo:1
Favorita
Depósito:5000
Mínimo:1
Favorita
Depósito:5000
Mínimo:1
Favorita
Depósito:5000
Mínimo:1
Favorita
Depósito:10000
Mínimo:2
Favorita
Depósito:10000
Mínimo:2
Favorita
Depósito:10000
Mínimo:1
Favorita
Depósito:10000
Mínimo:1
Favorita
Depósito:10000
Mínimo:2
Favorita
Depósito:10000
Mínimo:2
Favorita
Depósito:10000
Mínimo:1
Favorita
Detener a los expertos en producción, podemos proporcionar una gran cantidad de componentes electrónicos que se han detenido y que son difíciles de encontrar para facilitar la empresa de mantenimiento.