¡Hola! Acceder o Registrarse
APP Manual de datos Transmisión en vivo 290K likes UtsourceComprar(0)
Pida su cotización(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Añadir dirección
Nueva dirección de transporte
* Por favor, complete el número de teléfono celular correctamente para asegurarse de que puede recibir la información de seguimiento a tiempo.
Código de país
Favorita
Utsource certified used parts
Las piezas usadas certificadas por Utsource ofrecen las siguientes garantías:
1. Utsource inspeccionará los productos, incluida la inspección de apariencia (sin daños serios en la apariencia), seleccionará proveedores calificados y honestos, y asegurará una tasa de calificación del 98%.
2. Algunas partes son probadas por la máquina.
3. Las piezas certificadas de Utsource pueden devolverse y reembolsarse incondicionalmente dentro de los 60 días.
Descripción de producto
The AD536A is a complete monolithic integrated circuit that performs true rms-to-dc conversion. It offers performance comparable or superior to that of hybrid or modular units costing much more. The AD536A directly computes the true rms value of any complex input waveform containing ac and dc components. A crest factor compensation scheme allows measurements with 1% error at crest factors up to 7. The wide bandwidth of the device extends the measurement capability to 300 kHz with less than 3 dB errors for signal levels greater than 100 mV. An important feature of the AD536A, not previously available in rms converters, is an auxiliary dB output pin. The logarithm of the rms output signal is brought out to a separate pin to allow the dB conversion, with a useful dynamic range of 60 dB. Using an externally supplied reference current, the 0 dB level can be conveniently set to correspond to any input level from 0.1 V to 2 V rms. The AD536A is laser trimmed to minimize input and output offset voltage, to optimize positive and negative waveform symmetry (dc reversal error), and to provide full-scale accuracy at 7 V rms. As a result, no external trims are required to achieve the rated unit accuracy. The input and output pins are fully protected. The input circuitry can take overload voltages well beyond the supply levels. Loss of supply voltage with the input connected to external circuitry does not cause the device to fail. The output is short-circuit protected. The AD536A is available in two accuracy grades (J and K) for commercial temperature range (0°C to 70°C) applications, and one grade (S) rated for the ?55°C to +125°C extended range. The AD536AK offers a maximum total error of ±2 mV ± 0.2% of reading, while the AD536AJ and AD536AS have maximum errors of ±5 mV ± 0.5% of reading. All three versions are available in a hermetically sealed 14-lead DIP or a 10-pin TO-100 metal header package. The AD536AS is also available in a 20-terminal leadless hermetically sealed ceramic chip carrier. The AD536A computes the true root-mean-square level of a complex ac (or ac plus dc) input signal and provides an equivalent dc output level. The true rms value of a waveform is a more useful quantity than the average rectified value because it relates directly to the power of the signal. The rms value of a statistical signal also relates to its standard deviation. An external capacitor is required to perform measurements to the fully specified accuracy. The value of this capacitor determines the low frequency ac accuracy, ripple amplitude, and settling time. The AD536A operates equally well from split supplies or a single supply with total supply levels from 5 V to 36 V. With 1 mA quiescent supply current, the device is well suited for a wide variety of remote controllers and battery-powered instruments.
Todos los nombres de productos, marcas registradas, marcas y logotipos utilizados en este sitio son propiedad de sus respectivos dueños. La representación, descripción o venta de productos con estos nombres, marcas comerciales, marcas y logotipos es solo para fines de identificación y no pretende indicar ninguna afiliación o autorización por parte de ningún titular de derechos.
Vista previa de las 3 primeras páginas de la ficha técnica
Vista previa del documento
±0.2% maximum error (AD536AK) ±0.5% maximum error (AD536AJ) Wide response capability Computes rms of ac and dc signals 450 kHz bandwidth: V rms mV 2 MHz bandwidth: V rms 1 V Signal crest factor of 7 for 1% error dB output with 60 dB range Low power: 1.2 mA quiescent current Single- or dual-supply operation Monolithic integrated circuit to +125°C operation (AD536AS)
The is a complete monolithic integrated circuit that performs true rms-to-dc conversion. It offers performance comparable or superior to that of hybrid or modular units costing much more. The AD536A directly computes the true rms value of any complex input waveform containing ac and dc components. A crest factor compensation scheme allows measurements with 1% error at crest factors to 7. The wide bandwidth of the device extends the measurement capability to 300 kHz with less than 3 dB errors for signal levels greater than 100 mV.
An important feature of the AD536A, not previously available in rms converters, is an auxiliary dB output pin. The logarithm of the rms output signal is brought out to a separate pin to allow the dB conversion, with a useful dynamic range of 60 dB. Using an externally supplied reference current, the 0 dB level can be conveniently set to correspond to any input level from 2 V rms.
The AD536A is laser trimmed to minimize input and output offset voltage, to optimize positive and negative waveform symmetry (dc reversal error), and to provide full-scale accuracy 7 V rms. As a result, no external trims are required to achieve the rated unit accuracy.
The input and output pins are fully protected. The input circuitry can take overload voltages well beyond the supply levels. Loss of supply voltage with the input connected to external circuitry does not cause the device to fail. The output is short-circuit protected.
The AD536A is available in two accuracy grades (J and K) for commercial temperature range to 70°C) applications, and one grade (S) rated for the to +125°C extended range. The AD536AK offers a maximum total error 0.2% of reading, while the AD536AJ and AD536AS have maximum errors 0.5% of reading. All three versions are available in a hermetically sealed 14-lead DIP 10-pin TO-100 metal header package. The AD536AS is also available a 20-terminal leadless hermetically sealed ceramic chip carrier.
The AD536A computes the true root-mean-square level of a complex ac (or ac plus dc) input signal and provides an equivalent dc output level. The true rms value of a waveform is a more useful quantity than the average rectified value because it relates directly to the power of the signal. The rms value of a statistical signal also relates to its standard deviation.
An external capacitor is required to perform measurements to the fully specified accuracy. The value of this capacitor determines the low frequency ac accuracy, ripple amplitude, and settling time.
The AD536A operates equally well from split supplies or a single supply with total supply levels from 36 V. With 1 mA quiescent supply current, the device is well suited for a wide variety of remote controllers and battery-powered instruments.
Information furnished by Analog Devices is believed to be accurate and reliable. However, noresponsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.Features : 1 General Description : 1 Functional Block Diagram : 1 Revision History : 2 Specifications : 3 Absolute Maximum Ratings : 5
ESD Caution : 5 Pin Configurations and Function Descriptions : 6 Theory of Operation : 8E to Rev. F Change to Figure : 1 Changes to Table : 3 Change to Figure : 12 Changes to Ordering Guide : 15
D to Rev. E Reorganized Layout : Universal Changes to Figure : 1 Changes to Figure : 8 Changes to Figure : 9 Changes to Figure 13, Figure 14, and Figure : 11 Changes to Figure 16, Figure 17, and Single-Supply Operation Section : 12 Changes to Figure : 13 Updated Outline Dimensions : 14
C to Rev. D Changes to Features Section : 1 Changes to General Description Section : 1 Changes to Figure : 1 Changes to Table : 5
Frequency Response 9 AC Measurement Accuracy and Crest Factor : 9 Applications Information : 11 Typical Connections : 11 Optional External Trims For High Accuracy : 11 Single-Supply Operation : 12 Choosing the Averaging Time Constant : 12 Outline Dimensions : 14 Ordering Guide : 15
Change to Figure : 5 Changes to Figure : 10 Changes to Connections for dB Operation Section : 11 Changes to Figure : 12 Changes to Frequency Response Section : 12 Updated Outline Dimensions : 14 Changes to Ordering Guide : 15
B to Rev. C Updated Format : Universal Changed Product Description to General Description : 1 Changes to General Description : 1 Changes to Table : 3 Changes to Table : 5 Added Pin Configurations and Function Descriptions : 6 Changed Standard Connection to Typical Connections : 8 Changed Single Supply Connection to Single Supply Operation : 9 Changes to Connections for dB Operation : 11 Changes to Figure : 12 Updated Outline Dimensions : 14 Changes to Ordering Guide : 15
SPECIFICATIONSvs. Supply Voltage DC Reversal Error Total Error, External Trim1 (See Figure 16) ERROR VS. CREST FACTOR2 Crest Factor 1 to Crest Factor 2 Crest Factor = 3 Crest Factor = 7 FREQUENCY RESPONSE3 Bandwidth for 1% Additional Error (0.09 dB) VIN 10 mV VIN 100 mV VIN ±3 dB Bandwidth VIN 10 mV VIN 100 mV VIN 1 V
INPUT CHARACTERISTICS Signal Range, ±15 V Supplies Continuous RMS Level Peak Transient Input Continuous RMS Level, ±5 V Peak Transient Input, ±5 V Maximum Continuous Nondestructive Input Level (All Supply Voltages) Input Resistance Input Offset Voltage
OUTPUT CHARACTERISTICS Offset Voltage, VIN = COM (See Figure 13) vs. Temperature vs. Supply Voltage Swing, ±15 V Supplies 5 V Supply
dB OUTPUT, 1 V rms (See Figure 7) Error, mV < VIN 7 V rms Scale Factor Scale Factor Temperature Coefficient Uncompensated IREF for 1 V rms IREF Range
Algún número de pieza del mismo fabricante
Misma categoría
457 reseñas de compradores de Mexico
Daniel Moore
Length of registration:7 years
The AD536AJDZ integrated circuit from Utsource is a precision voltage-to-frequency converter with excellent performance. It features a high accuracy of 0.005% and a wide dynamic range of 0.5 Hz to 10 kHz. It also has a low temperature coefficient of 0.005%/°C and a low power consumption of only 1.5 mW. The AD536AJDZ is ideal for use in precision frequency-to-voltage conversion applications.
0
0
Responder0
03/17/2023
Método de pago europeo
Método de pago asiático
Método de pago americano
Método de pago internacional
Pedido
Pago
Transporte de mercancía
Cupón Regalo/Servicio Plus
Retorno de mercancías
Normalmente se aceptan devoluciones cuando se completan dentro de los 60 días a partir de la fecha de entrega del paquete.
Defectuoso (proporcione un informe de calidad de terceros de productos no conformes)
Los gastos de devolución deben ser prepagos; No aceptaremos envíos contra reembolso.
Politica de garantía
Todas las compras de UTSOURCE tienen una política de devolución de dinero de 60 días, más una garantía de UTSOURCE de 90 días contra cualquier defecto de fabricación. Esta garantía no se aplicará a ningún artículo donde los defectos hayan sido causados por un montaje incorrecto del cliente, el incumplimiento del cliente de seguir las instrucciones, la modificación del producto , operación negligente o inadecuada.
AD536AJDZ
AD536AJDZ tiene varias marcas en todo el mundo que pueden tener nombres alternativos para AD536AJDZ debido a diferencias o adquisiciones regionales. AD536AJDZ también se conoce con los siguientes nombres:
OPCIONES DE COMPRA
Estado de existencia: 5000
Mínimo: 1
Precio Total:
Precio unitario:586.11138
UTSOURCE
País:
United States
Correo Express: (FEDEX, UPS, DHL, TNT)Envío gratuito para los primeros 0.5kg para pedidos superiores a Mex $3384.51,cargos adicionales por peso superior
JudyGerente de personalización
sales@utsource.com
(888) 766 5577
+86 15302769052
+1 (312)899-4831
(whatsapp only)
Su dedicado servicio al cliente, brindándole el mejor servicio en cualquier momento.
Detener a los expertos en producción, podemos proporcionar una gran cantidad de componentes electrónicos que se han detenido y que son difíciles de encontrar para facilitar la empresa de mantenimiento.
Reply to
submit