≥1:
PHP40.01344
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Home > Elec-component > IC Chips > 74 series Digital Integrated Circuits
Description: The 74HC74 is a Dual D-Type Flip-Flop with Set and Reset. Features: High Speed Operation: tPD = 10ns (typ.) at VCC = 5V Low Power Consumption: ICC = 0.8mA (max) at TA = 25°C High Noi
Stock:10000
Minimum:4
Favorite
Stock:10000
Minimum:2
Favorite
Description: The 74HC4520D is a dual 4-bit binary ripple counter with separate clocks. Features: High speed operation Low power consumption High noise immunity Wide operating voltage range Outpu
Stock:10000
Minimum:3
Favorite
Description: Quadruple 2-Input Positive-AND Gates Features: - Inputs accept voltages up to 5.5V - Outputs source/sink up to 24mA - Low power TTL (LSTTL) - Outputs directly interface to CMOS, NMOS
Stock:10000
Minimum:2
Favorite
Description: The 74HC4049A is a high-speed CMOS logic hex inverting buffer/line driver with open-drain outputs. It is fabricated with silicon gate C2MOS technology. Features: High-speed operation H
Stock:10000
Minimum:3
Favorite
Stock:49950
Minimum:12
Favorite
Stock:49950
Minimum:12
Favorite
Part Name: Texas Instruments 74LS76 Description: The 74LS76 is a dual JK flip-flop component with a positive edge-triggering design. This component is made up of two independent JK flip-flops that ha
Stock:10000
Minimum:4
Favorite
Stock:10000
Minimum:2
Favorite
Description: The 74HC138 is a 3-to-8 line decoder/demultiplexer which is used to select one-of-eight data sources by decoding three binary signals. It can be used to select between 8 different 8-bit d
Stock:10000
Minimum:4
Favorite
TSSOP14
Texas Instruments
04+pbf
Dual D Flip-Flop with Set and ResetD
Description: The SN74HC14PWR is a hex Schmitt-trigger inverter from Texas Instruments. Features: Inputs accept voltages up to 7V Outputs source/sink up to 6mA Operating voltage range of 2V to 6V
Stock:10000
Minimum:4
Favorite
Stock:50000
Minimum:12
Favorite
The HD74LS163P is a 4-bit synchronous binary counter made by Hitachi. It is a 16-pin dual in-line package (DIP-16) with a wide operating voltage range of 2 to 6 volts. Description: The HD74LS163P is
Stock:10000
Minimum:2
Favorite
Description: The 74HC688N is an 8-bit parallel-load shift register with output latches. Features: High-speed operation: tpd = 10 ns (typical) at 5 V Low power consumption: ICC = 4 μA (maximum) Ou
Stock:10000
Minimum:2
Favorite
Description: Quad 2-Input AND Gate Features: Inputs Accept Voltages to 5.5 V Outputs Source/Sink 24 mA Outputs Can Drive Up to 10 LSTTL Loads Low Power Consumption, 20-μA Max Icc Bala
Stock:10000
Minimum:3
Favorite
Description: Quad 2-Input AND Gate Features: High-speed operation Low power consumption Inputs accept voltages up to 5.5 V Outputs source/sink 24 mA CMOS logic family Outputs are open-dr
Stock:10000
Minimum:3
Favorite
Stock:862513
Minimum:8
Favorite
Stock:4995
Minimum:4
Favorite
Stock:5000
Minimum:14
Favorite
Description: The 74HC4040D is a 12-stage binary ripple counter with a clock input (CP), an overriding asynchronous master reset input (MR) and twelve parallel outputs (Q0 to Q11). Features: High sp
Stock:10000
Minimum:3
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company