≥1:
PHP677.33559
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Home > Elec-component > IC Chips > Data Acquisition - Digital to Analog Converters (DAC)
CDIP-16
Analog Devices
03+
The AD558 DACPORT? is a complete voltage-output 8-bit digital-to-analog converter, including output amplifier, full microprocessor interface and precision voltage reference on a single monolithic chip. No external components or trims are required to interface, with full accuracy, an 8-bit data bus to an analog system. The performance and versatility of the DACPORT is a result of several recently-developed monolithic bipolar technologies. The complete microprocessor interface and control logic is implemented with integrated injection logic (I2 L), an extremely dense and low power logic structure that is process-compatible with linear bipolar fabrication. The internal precision voltage reference is the patented low voltage bandgap circuit which permits full-accuracy performance on a single +5 V to +15 V power supply. Thin-film silicon-chromium resistors provide the stability required for guaranteed monotonic operation over the entire operating temperature range (all grades), while recent advances in laser-wafer-trimming of these thin-film resistors permit absolute calibration at the factory to within ±1 LSB; thus no user-trims for gain or offset are required. A new circuit design provides voltage settling to ±1/2 LSB for a full-scale step in 800 ns. The AD558 is available in four performance grades. The AD558J and K are specified for use over the 0°C to +70°C temperature range, while the AD558S and T grades are specified for -55°C to +125°C operation. The "J" and "K" grades are available either in 16-pin plastic (N) or hermetic ceramic (D) DIPS. They are also available in 20-pin JEDEC standard PLCC packages. The "S" and "T" grades are available in the 16-pin hermetic ceramic DIP package. DACPORT is a registered trademark of Analog Devices, Inc.
Description: The AD558SD is a monolithic, low power, high accuracy, quad voltage-output, 12-bit digital-to-analog converter (DAC). Features: Low Power: 1.5 mW/Channel at +5 V High Accuracy: 0.02% Ma
Stock:5000
Minimum:1
Favorite
Stock:2000
Minimum:1
Favorite
DIP-20
Analog Devices
02+
12-Bit, Dual, Multiplying, IOUT D/A Converter; Package: PDIP; No of Pins: 20; Temperature Range: Commercial
Description: High Speed, Low Power, 8-Bit Multiplying DAC Features: 8-Bit Resolution Low Power Consumption High Speed Settling Time Low Nonlinearity Error Low Glitch Impulse Low Offset an
Stock:10000
Minimum:1
Favorite
Stock:10000
Minimum:2
Favorite
DIP-20
Analog Devices
02+
µP-Compatible 14-Bit CMOS DAC; Package: PDIP; No of Pins: 20; Temperature Range: Commercial
Description: The AD7534JNZ is a low power, high speed, 8-bit multiplying digital-to-analog converter (DAC) with a serial interface. Features: 8-bit resolution Low power consumption High speed o
Stock:10000
Minimum:1
Favorite
TSSOP-24
Analog Devices
08+
Dual 8-/10-/12-Bit, High Bandwidth, Multiplying DACs with Parallel Interface
Stock:2000
Minimum:1
Favorite
DIP-8
Analog Devices
+3.3V, 622Mbps SDH/SONET Laser Driver with Current Monitors and APC
Stock:2000
Minimum:1
Favorite
SSOP-16
Maxim Integrated
O2+
+5V, Low-Power, 8-Bit Quad DAC with Rail-to-Rail Output Buffers
Stock:5000
Minimum:1
Favorite
Description: The AD7542KP is a low power, 8-bit, multiplying digital-to-analog converter (MDAC) manufactured by Analog Devices. Features: - Low power consumption: 1.5 mW typical at 5 V - 8-bit resolu
Stock:10000
Minimum:1
Favorite
Description: The AD7542KN is a dual 8-bit digital-to-analog converter (DAC) from Analog Devices. Features: - 8-bit resolution - Dual DACs - Low power consumption - On-chip reference - Low glitch impu
Stock:10000
Minimum:2
Favorite
Stock:2000
Minimum:1
Favorite
The AD7243AN is a dual, low power, 10-bit digital-to-analog converter (DAC) from Analog Devices. It is a monolithic integrated circuit that converts digital signals into analog signals. Features: * 1
Stock:10000
Minimum:1
Favorite
Description: Low Noise, Low Distortion, High Speed, Wideband Operational Amplifier Features: Low Noise: 0.9 nV/√Hz Low Distortion: 0.0005% at 1 MHz High Speed: 4.5 MHz Bandwidth Wideband: 10
Stock:10000
Minimum:1
Favorite
DIP-24
Analog Devices
0944+
The AD7237A/AD7247A is an enhanced version of the industry standard AD7237/AD7247. Improvements include operation from 12 V to 15 V supplies, faster interface times and better reference variations with VDD . Additional features include faster settling times. The AD7237A/AD7247A is a complete, dual, 12-bit, voltage output digital-to-analog converter with output amplifiers and Zener voltage reference on a monolithic CMOS chip. No external user trims are required to achieve full specified performance. Both parts are microprocessor compatible, with high speed data latches and interface logic. The AD7247A accepts 12-bit parallel data which is loaded into the respective DAC latch using the WR input and a separate Chip Select input for each DAC. The AD7237A has a double buffered interface structure and an 8-bit wide data bus with data loaded to the respective input latch in two write operations. An asynchronous LDAC signal on the AD7237A updates the DAC latches and analog outputs. A REF OUT/REF IN function is provided which allows either the on-chip 5 V reference or an external reference to be used as a reference voltage for the part. For single supply operation, two output ranges of 0 V to +5 V and 0 V to +10 V are available, while these two ranges plus an additional ±5 V range are available with dual supplies. The output amplifiers are capable of developing +10 V across a 2 k(ohm) load to GND. The AD7237A/AD7247A is fabricated in Linear Compatible CMOS (LC2 MOS), an advanced, mixed technology process that combines precision bipolar circuits with low power CMOS logic. Both parts are available in a 24-pin, 0.3" wide plastic and hermetic dual-in-line package (DIP) and are also packaged in a 24-lead small outline (SOIC) package.
Stock:10000
Minimum:1
Favorite
Description: 8-Bit, Serial Input, Multiplying Digital-to-Analog Converter Features: - 8-bit resolution - Single +5V supply - Serial input - Low power - Low cost - Low noise - Fast settling -
Stock:2000
Minimum:1
Favorite
SOIC-24
Analog Devices
02+
µP-Compatible 14-Bit CMOS DAC; Package: SOIC - Wide; No of Pins: 24; Temperature Range: Commercial
Description: The AD7538 is a high speed, low power, 8-bit, voltage output digital-to-analog converter (DAC) with a serial interface. Features: 8-Bit Resolution Low Power Consumption: 2.5 mW
Stock:10000
Minimum:2
Favorite
Description: Low Power, Low Noise, 24-Bit Sigma-Delta ADC Features: - 24-bit resolution - Low power consumption - Low noise - Low distortion - Wide dynamic range - Low offset and gain err
Stock:5000
Minimum:1
Favorite
Description: The HI3-DAC80V-5 is a high-performance, 8-bit digital-to-analog converter (DAC) from Intersil/Harris. It is a monolithic integrated circuit designed for use in digital systems requiring a
Stock:2000
Minimum:1
Favorite
Description: 8-Bit, Serial-Input, Voltage-Output Digital-to-Analog Converter Features: 8-Bit Resolution Serial-Input Interface Voltage Output Low Power Consumption: 5 mW Low Cost Low Offset Erro
Stock:10000
Minimum:1
Favorite
Stock:2000
Minimum:1
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company