≥1:
PHP141.26433
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Home > Elec-component > IC Chips > Logic - Buffers, Drivers, Receivers, Transceivers
DIP-20
Harris
9836+
The ’HC540 and CD74HCT540 are Inverting Octal Buffers and Line Drivers with Three-State Outputs and the capability to drive 15 LSTTL loads. The ’HC541 and ’HCT541 are Non-Inverting Octal Buffers and Line Drivers with Three-State Outputs that can drive 15 LSTTL loads. The Output Enables (OE1\) and (OE2\) control the Three-State Outputs. If either OE1\ or OE2\ is HIGH the outputs will be in the high impedance state. For data output OE1\ and OE2\ both must be LOW.
Description: The CD74HCT540E is a high-speed CMOS logic octal non-inverting buffer/line driver. Features: - Low power consumption - High noise immunity - High speed - High output drive capability - I
Stock:10000
Minimum:2
Favorite
SOP-16
Texas Instruments
CD4502B consists of six inverter/buffers with 3-state outputs. A logic "1" on the OUTPUT DISABLE input produces a high-impedance state in all six outputs. This feature permits common busing of the outputs, thus simplifying system design. A Logic "1" on the INHIBIT input switches all six outputs to logic "0" if the OUTPUT DISABLE input is a logic "0". This device is capable of driving two standard TTL loads, which is equivalent to six times the JEDEC "B"-series IOL standard. The CD4502B types are supplied in 16-lead hermetic dual-in-line ceramic packages (F3A suffix), 16-lead dual-in-line plastic packages (E suffix), 16-lead small-outline packages (NSR suffix), and 16-lead thin shrink small-outline packages (PW and PWR suffixes).
Stock:10000
Minimum:2
Favorite
SOP-24
On Semiconductor
2009;2008
Octal Transceiver/Register with 3?State Outputs (Non?inverting)
Description: Hex Non-Inverting Buffer/Line Driver Features: - Low power Schottky TTL - Outputs source/sink 24mA - Outputs are TTL compatible - Inputs accept voltages to 7V - Outputs short
Stock:10000
Minimum:2
Favorite
Description: The MC74AC245N is an octal bus transceiver with 3-state outputs and is designed to provide high-speed, low-power, and low-voltage operation. Features: Low-power consumption High-
Stock:10000
Minimum:2
Favorite
Description: The MC74ACT125DG is a Quad Buffer/Line Driver with 3-State Outputs from ON Semiconductor. Features: Low Power Consumption High Speed Operation Outputs Source/Sink 24 mA Outputs Can
Stock:10000
Minimum:2
Favorite
Description: The 74F540PC is a high-speed CMOS logic device containing four independent 2-input NAND gates. Features: - High-speed operation: tPD = 10 ns (typical) - Low power consumption: ICC = 4 μA
Stock:10000
Minimum:2
Favorite
DIP-14
National Semiconductor
08+
Resistors, Variable sliding; Series:LCP15; Track Resistance:5kohm; Resistance Tolerance:+/-10%; Power Rating:0.4W; Operating Temperature Range:-30 C to +105 C; Resistor Element Material:Conductive Plastic RoHS Compliant: Yes
Stock:10000
Minimum:1
Favorite
Description: The SN74LS645N is a high-speed 8-bit parallel-in/parallel-out shift register with storage register from Texas Instruments. Features: 8-bit parallel-in/parallel-out shift register High-s
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:2
Favorite
DIP-20
National Semiconductor
93+
Bipolar Power TO220 PNP 10A 80V; Package: TO-220 3 LEAD STANDARD; No of Pins: 3; Container: Rail; Qty per Container: 50
Description: The MM74HCT541N is a high-speed CMOS 8-bit buffer/line driver with 3-state outputs. Features: High-speed CMOS logic Low power consumption High noise immunity High-impedance 3-
Stock:10000
Minimum:3
Favorite
DIP
Texas Instruments
Replaced by BQ2060A : Multi-Chemistry SBS 1.1 Compliant Gas Gauge With 5 LED Drivers, Additional Battery Mgmt Control 28-SSOP/QSOP 0 to 70
Stock:10000
Minimum:1
Favorite
Description: Octal Bus Transceiver with 3-State Outputs Features: 8-Bit Non-Inverting Buffer/Line Driver with 3-State Outputs Outputs Can Drive Up to 15 LSTTL Loads Low Power Consumption, 80-μ
Stock:10000
Minimum:3
Favorite
Description: The 74ACT11240NT is a high-speed CMOS octal buffer/line driver with 3-state outputs. Features: High-speed performance: tpd = 8.5 ns (typical) at VCC = 5.0 V Low power consumption: ICC
Stock:10000
Minimum:1
Favorite
SSOP-48
Texas Instruments
74ACT Family, Buffer/Driver, Texas Instruments Advanced CMOS Logic Operating Voltage: 4.5 to 5.5 Compatibility: Input TTL, Output CMOS
Stock:10000
Minimum:1
Favorite
DIP
Moto
95+
Quad Buffer with 3-State Outputs; Package: PDIP-14; No of Pins: 14; Container: Rail; Qty per Container: 500
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:4
Favorite
Description: The 74LV244PW is a low-voltage, low-power, octal buffer/line driver with 3-state outputs. Features: Low-voltage operation: VCC = 2.3 V to 3.6 V High-impedance 3-state outputs Inputs
Stock:10000
Minimum:2
Favorite
TSSOP-20
Fairchil
Low Voltage Buffer/Line Driver with 5V Tolerant Inputs and Outputs with 26W Series Resistors in the Outputs
Stock:10000
Minimum:2
Favorite
Description: Octal Buffer/Line Driver with 3-State Outputs Features: - Low power consumption - High-impedance 3-state outputs - Inputs and outputs meet TTL voltage levels - Outputs can driv
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:1
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company