≥1:
PHP47.80990
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
DIP14
Texas Instruments
07+
These devices contain two independent D-type positive-edge-triggered flip-flops. A low level at the preset or clear inputs sets or resets the outputs regardless of the levels of the other inputs. When preset and clear are inactive (high), data at the D input meeting the setup time requirements are transferred to the outputs on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not directly related to the rise time of the clock pulse. Following the hold time interval, data at the D input may be changed without affecting the levels at the outputs. The SN54' family is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74' family is characterized for operation from 0°C to 70°C.
SN74LS74AN is a dual positive-edge triggered D-type flip-flop with individual data (D) and clock (CP) inputs. It is a 14-pin dual in-line package (DIP) manufactured by Texas Instruments. Description:
Stock:10000
Minimum:3
Favorite
Stock:10000
Minimum:1
Favorite
TSSOP14
PH2
The 74HC74PW is a dual positive edge-trigger D-type Flip-flop with set and reset. It has individual data (nD), clock (nCP), set (nSD\) and reset (nRD\) inputs and complementary nQ and nQ\ outputs. Data at the nD-input, that meets the set-up and hold time requirements on the low-to-high clock transition, is stored in the flip-flop and appears at the nQ output. Schmitt-trigger action in the clock input, makes the circuit highly tolerant to slower clock rise and fall times. Inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Description: Dual D-Type Flip-Flop with Preset and Clear Features: Wide supply voltage range: 2.0 V to 6.0 V Inputs accept voltages up to 6.0 V Outputs source/sink 24 mA Low power consumption
Stock:10000
Minimum:3
Favorite
Stock:10000
Minimum:4
Favorite
Description: The 74ACTQ18823SSC is a high-speed CMOS octal bus transceiver featuring non-inverting 3-state outputs and is designed for 2.7V to 3.6V VCC operation. Features: - High-speed operation: tp
Stock:5000
Minimum:1
Favorite
TSSOP14
FSC
MR, Active low P-P internal pullup, Active high P-P, -40C to +125C, 5-SOT-23, T/R
Stock:10000
Minimum:3
Favorite
DIP
Texas Instruments
01+
LMC7101 Tiny Low Power Operational Amplifier with Rail-To-Rail Input and Output; Package: SOT-23; No of Pins: 5
Stock:10000
Minimum:1
Favorite
Stock:10000
Minimum:2
Favorite
DIP14
Fairchil
94
1.5 A 280kHz/560kHz Boost Regulators; Package: SOIC-8 Narrow Body; No of Pins: 8; Container: Tape and Reel; Qty per Container: 2500
Description: Dual D-Type Flip-Flop with Set and Reset Features: - High-Speed Operation - Low Power Consumption - High Noise Immunity - Inputs Accept Voltages to 5.5V Application: This d
Stock:10000
Minimum:3
Favorite
Stock:10000
Minimum:1
Favorite
DIP20
Ns/fsc
Quad Buffer with 3-STATE Outputs; Package: SOIC; No of Pins: 14; Container: Rail
Stock:10000
Minimum:3
Favorite
Description: The DM7474N is a dual negative-edge triggered D-type flip-flop with independent data, set, and reset inputs. Features: High-Speed Performance: tPD = 10 ns (typical) Low Power Cons
Stock:10000
Minimum:2
Favorite
SOP-14
Ns/fsc
1.5 A 280kHz/560kHz Boost Regulators; Package: SOIC-8 Narrow Body; No of Pins: 8; Container: Rail; Qty per Container: 98
Description: The MM74HC74AM is a dual D-type flip-flop with set and reset inputs. It is a high-speed, low-power, dual-in-line CMOS device. Features: High-speed operation Low-power consumption High
Stock:10000
Minimum:3
Favorite
DIP-16
Texas Instruments
500mA, 5V,±2% Tolerance, Voltage Regulator, Ta = 0°C to +125°C; Package: DPAK 4 LEAD Single Gauge Surface Mount; No of Pins: 4; Container: Tape and Reel; Qty per Container: 2500
Description: Dual J-K Flip-Flop Features: - Inputs Include Clocks, Set, Reset, and Direct Clear - Outputs Source/Sink 24 mA - Fanout of 10 LSTTL Loads - Balanced Propagation Delay and Transition Times
Stock:10000
Minimum:5
Favorite
Description: Dual JK Flip-Flop Features: - Low power Schottky TTL (LSTTL) - Inputs compatible with standard TTL outputs - Outputs source/sink 24 mA - Typical propagation delay: 8 ns - Typical p
Stock:10000
Minimum:1
Favorite
SN74HC175N is a Quad D-type flip-flop IC with a DIP-16 package manufactured by Texas Instruments. It is a high-speed CMOS logic device that is designed for low-power operation. Description: The SN74H
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:2
Favorite
Description: Dual D-Type Flip-Flop with Set and Reset Features: -Wide supply voltage range: 2.0V to 6.0V -High noise immunity -Low power consumption -Typical tpd = 10ns -Inputs accept voltages
Stock:10000
Minimum:13
Favorite
Description: The 74HC574D is an 8-bit D-type flip-flop with 3-state outputs from NXP Semiconductors. Features: High-speed operation: tpd = 10 ns (typical) at VCC = 5 V Low power consumption: I
Stock:10000
Minimum:4
Favorite
Manufacturer: IDT Description: Octal D-Type Flip-Flop Features: High Speed: tPD = 10 ns (typical) at VCC = 5 V Low Power Consumption: ICC = 4 μA (max) at TA = 25°C Wide Operating Voltage Range: VCC
Stock:10000
Minimum:2
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company