Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country Code
Favorite
Utsource certified used parts
Utsource certified used parts provide the following guarantees:
1. Utsource will inspect the goods, including appearance inspection (no serious damage to the appearance), select qualified and honest suppliers, and ensure 98% qualification rate.
2. Some parts are tested by machine.
3. Utsource certified parts can be returned and refunded unconditionally within 60 days.
Description
This 8-bit noninverting bus transceiver uses two separate configurable power-supply rails. The SN74AVC8T245 is optimized to operate with VCCA/VCCB set at 1.4 V to 3.6 V. The device is operational with VCCA/VCCB as low as 1.2 V. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.2 V to 3.6 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, and 3.3-V voltage nodes.
The SN74AVC8T245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the outputs so the buses are effectively isolated.
The SN74AVC8T245 is designed so that the control pins (DIR and OE) are supplied by VCCA.
The SN74AVC8T245 solution is compatible with a single-supply system and can be replaced later with a ’245 function, with minimal printed circuit board redesign.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, thus preventing damaging current backflow through the device when it is powered down.
The VCC isolation feature ensures that if either VCC input is at GND, both ports are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE shall be tied to VCC through a pullup resistor
the minimum value of the resistor is determined by the current-sinking capability of the driver.
Title
8-Bit Dual-Supply Bus Transceiver with Configurable Voltage-Level Shifting and 3-State Outputs
All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
Preview of the first 3 pages of the data sheet
Document Preview
SN74AVC8T245 8-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation and 3-State Outputs
ESD Protection Exceeds JESD 8000-V Human-Body Model 200-V Machine Model 1000-V Charged-Device Model (C101)
Control Inputs VIH/VIL Levels Are Referenced to VCCA VoltageVCC Isolation Feature If Either VCC Input Is at GND, All I/O Ports Are in the High-Impedance State
Ioff Supports Partial Power-Down Mode Operation Fully Configurable Dual-Rail Design Allows EachPort to Operate Over the Full to 3.6-V Power-Supply Range I/Os Are 4.6-V Tolerant Maximum Data Rates 170 Mbps (VCCA V or VCCB 320 Mbps (VCCA 1.8 V and VCCB 1.8 V)
This 8-bit noninverting bus transceiver uses two separate configurable power-supply rails. The SN74AVC8T245 is optimized to operate with VCCA/VCCB set 3.6 V. The device is operational with VCCA/VCCB as low 1.2 V. The A port is designed to track VCCA. VCCA accepts any supply voltage from 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 3.6 V. This allows for universal low-voltage bidirectional translation between any of the 1.8-V, 2.5-V, and 3.3-V voltage nodes.
The SN74AVC8T245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the outputs so the buses are effectively isolated.
The SN74AVC8T245 is designed so that the control pins (DIR and OE) are supplied by VCCA.The SN74AVC8T245 solution is compatible with a single-supply system and can be replaced later with a '245 function, with minimal printed circuit board redesign.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, thus preventing damaging current backflow through the device when it is powered down.
The VCC isolation feature ensures that if either VCC input is at GND, both ports are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE shall be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA.
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.Changed MAX value for Operating free-air temperature, TA from: 85°C to: : 5 Added values for +125°C in Electrical Characteristics and all Switching Characteristics tables : 6 Added Documentation Support section, Receiving Notification of Documentation Updates, and Community
Added Pin Configuration and Functions section, ESD Rating table, Feature Description section, Device Functional Modes, Application and Implementation section, Power Supply Recommendations section, Layout section, Device and Documentation Support section, and Mechanical, Packaging, and Orderable Information section : 1
DESCRIPTIONSome Part number from the same manufacture
Same catergory
6 buyer reviews from Philippines
Kim Benedict Chua
Length of registration:3 years
Got it in very good packaging. Will test and hopefully it will work well. Thank you!
0
0
Reply0
03/17/2021
Ramon R. Reyes
Length of registration:12 years
works good! fm DU1FV
0
0
Reply0
03/27/2017
Norman Tayo
Length of registration:10 years
THANK YOU...GOT THE ITEM QUICKLY.
0
0
Reply0
02/06/2017
European payment method
Asia payment method
America payment method
International payment method
Latest shipping video More
Order
Payment
Shipping
Gift Coupon/Plus service
Returning
Returns are normally accepted when completed within 60 days from the date of the parcel delivered.
Defective ( Please provide a third party quality report of nonconforming products)
Return Freight charges must be prepaid; we will not accept COD shipments.
Warranty
All UTSOURCE purchases have a 60 days money back return policy, plus a 90 days UTSOURCE warranty against any manufacturing defects.This warranty shall not apply to any item where defects have been caused by improper customer assembly, failure by customer to follow instructions, product modification, negligent or improper operation.
SN74AVC8T245PW
SN74AVC8T245PW has several brands around the world that may have alternate names for SN74AVC8T245PW due to regional differences or acquisition. SN74AVC8T245PW may also be known as the following names:
BUYING OPTIONS
Country:
United States
Express:(FEDEX, UPS, DHL, TNT)Free shipping on first 0.5kg for orders over PHP11045.15,Overweight will be charged separately
JudyCustomer Manager
sales@utsource.com
(888) 766 5577
+86 15302769052
+1 (312)899-4831
(whatsapp only)
Your dedicated customer service, providing you the best service at any time.
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company
Reply to
submit