PMIC - Reguladores de Tensão - Controladores de Comutação DC DC

Dual Synchronous Buck Pseudo Fixed Frequency Power Supply Controller The SC1485 is a dual output constant on synchronousbuck PWM controller intended for use in notebook computers and other battery operated portable devices. Features include high efficiency and a fast dynamic response with no minimum on time. The excellent transient response, means that SC1485 based solutions will require less output capacitance than competing fixed frequency converters. The frequency is constant until a step in load or line voltage occurs at which time the pulse density and frequency will increase or decrease to counter the change in output or input voltage. After the transient event, the controller frequency will return to steady state operation. At light loads, Power-Save Mode enables the SC1485 to skip PWM pulses for better efficiency.

The UCC2891/2/3/4 family of PWM controllers is designed to simplify implementation of the various active clamp/reset switching power topologies. The UCC289x is a peak current-mode, fixedfrequency, high-performance pulse width modulator. It includes the logic and the drive capability for the auxiliary switch with a simple method of programming the critical delays for proper active clamp operation. The UCC2891/3 includes a 110-V start-up regulator for initial start-up and to provide keep-alive power during stand-by. Additional features include an internal programmable slope compensation circuit, precise DMAX limit, and a single resistor programmable synchronizable oscillator. An accurate line monitoring function also programs the converter\x92s ON and OFF transitions with regard to the bulk input voltage. Along with the UCC2897, this UCC289x family allows the power supply designer to eliminate many of the external components, reducing the size and complexity of the design.

The UC3844B, UC3845B series are high performance fixed frequency current mode controllers. They are specifically designed for Off-Line and dc-to-dc converter applications offering the designer a cost-effective solution with minimal external components. These integrated circuits feature an oscillator, a temperature compensated reference, high gain error amplifier, current sensing comparator, and a high current totem pole output ideally suited for driving a power MOSFET. Also included are protective features consisting of input and reference undervoltage lockouts each with hysteresis, cycle-by-cycle current limiting, a latch for single pulse metering, and a flip-flop which blanks the output off every other oscillator cycle, allowing output deadtimes to be programmed from 50% to 70%. These devices are available in an 8-pin dual-in-line and surface mount (SO-8) plastic package as well as the 14-pin plastic surface mount (SO-14). The SO-14 package has separate power and ground pins for the totem pole output stage. The UCX844B has UVLO thresholds of 16 V (on) and 10 V (off), ideally suited for off-line converters. The UCX845B is tailored for lower voltage applications having UVLO thresholds of 8.5 V (on) and 7.6 V (off).

HIGH - SPEED VOLTAGE MODE PULSE MODE WIDTH MODULATOR

Dual Pulse-Width-Modulation Control Circuit 16-SO

8-Pin High-Performance Resonant Mode Controller


CURRENT-MODE ACTIVE CLAMP PWM CONTROLLER

IC REG CTRLR BUCK/FLYBACK 18JDIP

High Performance Current Mode Controllers

Pulse Width Modulator Control Circuit

High Performance Current Mode Controllers

REGULATING PULSE WIDTH MODULATORS

High Performance Current Mode Controllers

Fixed Frequency, PWM, Voltage Mode Single Ended Controllers

CTRLR CURRENT MODE HP 8DIP

Advanced Regulating Pulse Width Modulators

DC/DC Cntrlr Single-OUT Step Down 330kHz 16-Pin QFN EP T/R

Current Mode PWM Controller

Controller Miscellaneous - Datasheet Reference

PWM CURRENT MODE 8TSSOP