Vídeo do produto Produto Foto

AD536AJDZ The AD536A is a complete monolithic integrated circuit that performs true rms-to-dc conversion. It offers performance comparable or superior to that of hybrid or modular units costing much more. The AD536A directly computes the true rms value of any complex input waveform containing ac and dc components. A crest factor compensation scheme allows measurements with 1% error at crest factors up to 7. The wide bandwidth of the device extends the measurement capability to 300 kHz with less than 3 dB errors for signal levels greater than 100 mV.
An important feature of the AD536A, not previously available in rms converters, is an auxiliary dB output pin. The logarithm of the rms output signal is brought out to a separate pin to allow the dB conversion, with a useful dynamic range of 60 dB. Using an externally supplied reference current, the 0 dB level can be conveniently set to correspond to any input level from 0.1 V to 2 V rms.
The AD536A is laser trimmed to minimize input and output offset voltage, to optimize positive and negative waveform symmetry (dc reversal error), and to provide full-scale accuracy at 7 V rms. As a result, no external trims are required to achieve the rated unit accuracy.
The input and output pins are fully protected. The input circuitry can take overload voltages well beyond the supply levels. Loss of supply voltage with the input connected to external circuitry does not cause the device to fail. The output is short-circuit protected.
The AD536A is available in two accuracy grades (J and K) for commercial temperature range (0°C to 70°C) applications, and one grade (S) rated for the ?55°C to +125°C extended range. The AD536AK offers a maximum total error of ±2 mV ± 0.2% of reading, while the AD536AJ and AD536AS have maximum errors of ±5 mV ± 0.5% of reading. All three versions are available in a hermetically sealed 14-lead DIP or a 10-pin TO-100 metal header package. The AD536AS is also available in a 20-terminal leadless hermetically sealed ceramic chip carrier.
The AD536A computes the true root-mean-square level of a complex ac (or ac plus dc) input signal and provides an equivalent dc output level. The true rms value of a waveform is a more useful quantity than the average rectified value because it relates directly to the power of the signal. The rms value of a statistical signal also relates to its standard deviation.
An external capacitor is required to perform measurements to the fully specified accuracy. The value of this capacitor determines the low frequency ac accuracy, ripple amplitude, and settling time.
The AD536A operates equally well from split supplies or a single supply with total supply levels from 5 V to 36 V. With 1 mA quiescent supply current, the device is well suited for a wide variety of remote controllers and battery-powered instruments.

Vendas :6

113521

5.0 de 5 estrelas

1 star 0.3%

2 star 0%

3 star 0.2%

4 star 0.4%

5 star 99.1%

Total de produtos: 2398031

Total de vendas: 12711129

Average lead time: 0 hora

Prazos de entrega (Expresso): 0

Prazos de entrega (Correios): 0

Favorito

AD536AJDZ

USED

Utsource certified used parts

As peças usadas certificadas pela Utsource fornecem as seguintes garantias:

1. A Utsource inspecionará as mercadorias, incluindo a inspeção da aparência (sem danos graves à aparência), selecionará fornecedores qualificados e honestos e garantirá uma taxa de qualificação de 98%.

2. Algumas peças são testadas pela máquina.

3. As peças certificadas pela Utsource podem ser devolvidas e reembolsadas incondicionalmente dentro de 60 dias.

Descrição do produto

The AD536A is a complete monolithic integrated circuit that performs true rms-to-dc conversion. It offers performance comparable or superior to that of hybrid or modular units costing much more. The AD536A directly computes the true rms value of any complex input waveform containing ac and dc components. A crest factor compensation scheme allows measurements with 1% error at crest factors up to 7. The wide bandwidth of the device extends the measurement capability to 300 kHz with less than 3 dB errors for signal levels greater than 100 mV. An important feature of the AD536A, not previously available in rms converters, is an auxiliary dB output pin. The logarithm of the rms output signal is brought out to a separate pin to allow the dB conversion, with a useful dynamic range of 60 dB. Using an externally supplied reference current, the 0 dB level can be conveniently set to correspond to any input level from 0.1 V to 2 V rms. The AD536A is laser trimmed to minimize input and output offset voltage, to optimize positive and negative waveform symmetry (dc reversal error), and to provide full-scale accuracy at 7 V rms. As a result, no external trims are required to achieve the rated unit accuracy. The input and output pins are fully protected. The input circuitry can take overload voltages well beyond the supply levels. Loss of supply voltage with the input connected to external circuitry does not cause the device to fail. The output is short-circuit protected. The AD536A is available in two accuracy grades (J and K) for commercial temperature range (0°C to 70°C) applications, and one grade (S) rated for the ?55°C to +125°C extended range. The AD536AK offers a maximum total error of ±2 mV ± 0.2% of reading, while the AD536AJ and AD536AS have maximum errors of ±5 mV ± 0.5% of reading. All three versions are available in a hermetically sealed 14-lead DIP or a 10-pin TO-100 metal header package. The AD536AS is also available in a 20-terminal leadless hermetically sealed ceramic chip carrier. The AD536A computes the true root-mean-square level of a complex ac (or ac plus dc) input signal and provides an equivalent dc output level. The true rms value of a waveform is a more useful quantity than the average rectified value because it relates directly to the power of the signal. The rms value of a statistical signal also relates to its standard deviation. An external capacitor is required to perform measurements to the fully specified accuracy. The value of this capacitor determines the low frequency ac accuracy, ripple amplitude, and settling time. The AD536A operates equally well from split supplies or a single supply with total supply levels from 5 V to 36 V. With 1 mA quiescent supply current, the device is well suited for a wide variety of remote controllers and battery-powered instruments.

Não encontrado, folha de dados semelhante recomendada

ECAD Module
Tipo de montagem: Through Hole
Marca: Analog Devices
Pacote / Caso: DIP14
Tipo de pacote: SBCDIP
Contagem de Pin: 14
Dimensões: 19.94 x 7.87 x 5.08mm
Comprimento: 19.94mm
Largura: 7.87mm
Altura: 5.08mm
Temperatura operacional máxima: +70 °C
Temperatura operacional mínima: 0 °C
Faixa de temperatura operacional: 0 → +70 °C
Corrente de saída mínima: 5mA
Faixa de corrente de saída: 5 mA

Modelos semelhantes LM231 LM2907-N LM2917-N LM331 VFC110 VFC320

Todos os nomes de produtos, marcas registradas, marcas e logotipos usados neste site são de propriedade de seus respectivos proprietários. A representação, descrição ou venda de produtos com esses nomes, marcas registradas, marcas e logotipos é apenas para fins de identificação e não se destina a indicar qualquer afiliação ou autorização de qualquer detentor de direitos.

ECAD Module

Atributos do produto

Description: The AD536AJDZ is a precision monolithic integrated circuit designed to provide a low cost, low power, high accuracy solution for a variety of signal conditioning applications. Features: Low cost Low power High accuracy Wide input range Low offset voltage Low drift Low noise Fast settling time Applications: Data acquisition systems Industrial process control Medical instrumentation Test and measurement systems Automotive systems Aerospace systems (For reference only)

Pré-visualização das 3 primeiras páginas da folha de dados

Visualização do Documento

FEATURES
True rms-to-dc conversion Laser trimmed to high accuracy

±0.2% maximum error (AD536AK) ±0.5% maximum error (AD536AJ) Wide response capability Computes rms of ac and dc signals 450 kHz bandwidth: V rms mV 2 MHz bandwidth: V rms 1 V Signal crest factor of 7 for 1% error dB output with 60 dB range Low power: 1.2 mA quiescent current Single- or dual-supply operation Monolithic integrated circuit to +125°C operation (AD536AS)

The is a complete monolithic integrated circuit that performs true rms-to-dc conversion. It offers performance comparable or superior to that of hybrid or modular units costing much more. The AD536A directly computes the true rms value of any complex input waveform containing ac and dc components. A crest factor compensation scheme allows measurements with 1% error at crest factors to 7. The wide bandwidth of the device extends the measurement capability to 300 kHz with less than 3 dB errors for signal levels greater than 100 mV.

An important feature of the AD536A, not previously available in rms converters, is an auxiliary dB output pin. The logarithm of the rms output signal is brought out to a separate pin to allow the dB conversion, with a useful dynamic range of 60 dB. Using an externally supplied reference current, the 0 dB level can be conveniently set to correspond to any input level from 2 V rms.

The AD536A is laser trimmed to minimize input and output offset voltage, to optimize positive and negative waveform symmetry (dc reversal error), and to provide full-scale accuracy 7 V rms. As a result, no external trims are required to achieve the rated unit accuracy.

The input and output pins are fully protected. The input circuitry can take overload voltages well beyond the supply levels. Loss of supply voltage with the input connected to external circuitry does not cause the device to fail. The output is short-circuit protected.

The AD536A is available in two accuracy grades (J and K) for commercial temperature range to 70°C) applications, and one grade (S) rated for the to +125°C extended range. The AD536AK offers a maximum total error 0.2% of reading, while the AD536AJ and AD536AS have maximum errors 0.5% of reading. All three versions are available in a hermetically sealed 14-lead DIP 10-pin TO-100 metal header package. The AD536AS is also available a 20-terminal leadless hermetically sealed ceramic chip carrier.

The AD536A computes the true root-mean-square level of a complex ac (or ac plus dc) input signal and provides an equivalent dc output level. The true rms value of a waveform is a more useful quantity than the average rectified value because it relates directly to the power of the signal. The rms value of a statistical signal also relates to its standard deviation.

An external capacitor is required to perform measurements to the fully specified accuracy. The value of this capacitor determines the low frequency ac accuracy, ripple amplitude, and settling time.

The AD536A operates equally well from split supplies or a single supply with total supply levels from 36 V. With 1 mA quiescent supply current, the device is well suited for a wide variety of remote controllers and battery-powered instruments.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
Tel: 781.329.4700 ©19762019 Analog Devices, Inc. All rights reserved.

Features : 1 General Description : 1 Functional Block Diagram : 1 Revision History : 2 Specifications : 3 Absolute Maximum Ratings : 5

ESD Caution : 5 Pin Configurations and Function Descriptions : 6 Theory of Operation : 8
F to Rev. G Changes to Figure 5 and Table : 7 Change to Figure : 12 Changes to Ordering Guide : 15

E to Rev. F Change to Figure : 1 Changes to Table : 3 Change to Figure : 12 Changes to Ordering Guide : 15

D to Rev. E Reorganized Layout : Universal Changes to Figure : 1 Changes to Figure : 8 Changes to Figure : 9 Changes to Figure 13, Figure 14, and Figure : 11 Changes to Figure 16, Figure 17, and Single-Supply Operation Section : 12 Changes to Figure : 13 Updated Outline Dimensions : 14

C to Rev. D Changes to Features Section : 1 Changes to General Description Section : 1 Changes to Figure : 1 Changes to Table : 5

Frequency Response 9 AC Measurement Accuracy and Crest Factor : 9 Applications Information : 11 Typical Connections : 11 Optional External Trims For High Accuracy : 11 Single-Supply Operation : 12 Choosing the Averaging Time Constant : 12 Outline Dimensions : 14 Ordering Guide : 15

Change to Figure : 5 Changes to Figure : 10 Changes to Connections for dB Operation Section : 11 Changes to Figure : 12 Changes to Frequency Response Section : 12 Updated Outline Dimensions : 14 Changes to Ordering Guide : 15

B to Rev. C Updated Format : Universal Changed Product Description to General Description : 1 Changes to General Description : 1 Changes to Table : 3 Changes to Table : 5 Added Pin Configurations and Function Descriptions : 6 Changed Standard Connection to Typical Connections : 8 Changed Single Supply Connection to Single Supply Operation : 9 Changes to Connections for dB Operation : 11 Changes to Figure : 12 Updated Outline Dimensions : 14 Changes to Ordering Guide : 15

SPECIFICATIONS
Total Error, Internal Trim1 (See Figure 13) vs. Temperature TMIN to +70°C

vs. Supply Voltage DC Reversal Error Total Error, External Trim1 (See Figure 16) ERROR VS. CREST FACTOR2 Crest Factor 1 to Crest Factor 2 Crest Factor = 3 Crest Factor = 7 FREQUENCY RESPONSE3 Bandwidth for 1% Additional Error (0.09 dB) VIN 10 mV VIN 100 mV VIN ±3 dB Bandwidth VIN 10 mV VIN 100 mV VIN 1 V

INPUT CHARACTERISTICS Signal Range, ±15 V Supplies Continuous RMS Level Peak Transient Input Continuous RMS Level, ±5 V Peak Transient Input, ±5 V Maximum Continuous Nondestructive Input Level (All Supply Voltages) Input Resistance Input Offset Voltage

OUTPUT CHARACTERISTICS Offset Voltage, VIN = COM (See Figure 13) vs. Temperature vs. Supply Voltage Swing, ±15 V Supplies 5 V Supply

dB OUTPUT, 1 V rms (See Figure 7) Error, mV < VIN 7 V rms Scale Factor Scale Factor Temperature Coefficient Uncompensated IREF for 1 V rms IREF Range

Produtos relacionados com a mesma folha de dados

LTC5509

. # of Channels : 1, Min Positive Supply Voltage : 2.7V, Max Positive Supply Voltage : 6V, Supply Voltage

HMC631

. Supply Voltage (typ) : 8V, Gain/Attenuator Control Range (dB) : 40dB, Phase Noise Floor : -160dBc/Hz,

LTC1282

. VSupply Unipolar : No, ADC Output Sample Rate (max) : 140kSPS, Vref Source : External, Signal to Noise

LTC2260-14

. ADC Output Sample Rate (max) : 105MSPS, Vref Source : External, Internal, Signal to Noise + Distortion

LTC1257

. # of Channels : 1, Vref Source : External, Internal, Min Positive Supply Voltage : 4.5V, Max Positive

AD5544

. # of Channels : 4, Vref Source : External, Min Positive Supply Voltage : 2.7V, Max Positive Supply Voltage

LTM4678

. Synchronous : Yes, Monolithic : Yes, Vout Min : 500mV, Output Current : 25A, Number of Outputs : 2, Integrated

LTC3127

. Synchronous : Yes, Monolithic : Yes, Vout Min : 1.8V, Output Current : 1A, Number of Outputs : 1, Integrated

LT6002

. Shutdown : No, Bandwidth -3 dB (typ) : Hz, Number of Amplifiers per Package : 4, Minimum Total Supply

HMC395-DIE

. # of Channels : 1, Min Positive Supply Voltage : 5V, Max Positive Supply Voltage : 5V, Supply Voltage

Algum número de peça do mesmo fabricante

AD636

LTC1967

XCL303

Inductor Built-in Negative Output Voltage "micro DC/DC" Converters.

XCL202

400mA Inductor Built-in Step-Down "micro DC/DC" Converters.

XCL210

50mA/200mA Inductor Built-in Step-Down "micro DC/DC" Converters.

XCL212

2.0A Inductor Built-in Step-Down "micro DC/DC" Converters.

XC9275

COT Control, 3.0A Synchronous Step-Down DC/DC Converters.

XC9280

18V Operation 3.0A Synchronous Step-Down DC/DC Converters.

XC9213

Synchronous Step-Down DC/DC Controller, Input voltage 25V.

XC9235

600mA Synchronous Step-Down DC/DC Converters.

mesma categoria

AD637JR

DIODE ZENER SINGLE 250mW 18Vz 5mA-Izt 0.05 0.1uA-Ir 12.6 DFN1006-2 3K/REEL

AD736JNZ

Low Cost, Low Power, True RMS-to-DC Converter

AD637JD

High Precision, Wide-Band RMS-to-DC Converter

AD536AJQ

Integrated Circuit True RMS-to-DC Converter

AD536ASD

Integrated Circuit True RMS-to-DC Converter

AD536AKD

Integrated Circuit True RMS-to-DC Converter

LTC1966IMS8

Precision Micropower, SIGMA RMS-to-DC Converter

AD736JN

Low Cost, Low Power, True RMS-to-DC Converter

Comentários do Produto

Submit

170 comentários de compradores de Portugal

Daniel Moore

AD536AJDZ

United States

Length of registration:7 years

The AD536AJDZ integrated circuit from Utsource is a precision voltage-to-frequency converter with excellent performance. It features a high accuracy of 0.005% and a wide dynamic range of 0.5 Hz to 10 kHz. It also has a low temperature coefficient of 0.005%/°C and a low power consumption of only 1.5 mW. The AD536AJDZ is ideal for use in precision frequency-to-voltage conversion applications.

Responder0

03/17/2023

See all reviews >>

Método de pagamento

Método de pagamento Europeu

Método de pagamento Ásia

Método de pagamento América

Método de pagamento internacional

Processo de compra

Pesquise no site

Envie uma consulta
Adicionar ao carrinho de compras

Adicionar ao carrinho de consulta

Citação
Finalizar Pedido
Armazenagem de mercadorias

Embalagem

Enviar pedido para fora

Guia de Compras Pesquisa Relacionada Fornecedor Relacionado Nomes Alternativos

Guia de Compras

Encomenda

Os utilizadores podem adicionar peças ao carrinho e carregar o BOM ao pesquisar peças, calcular custos num segundo, oferecer a melhor lista de materiais.
Alguns produtos específicos precisam de atingir a quantidade mínima de pedido.
Os utilizadores podem obter cupões aleatoriamente quando aplicam mais um membro. A Utsource oferece diferentes opções de compra com qualidade de produto diferente de diferentes lojas de vendedores ao fazer pedidos.
Os utilizadores podem adicionar produtos ao "carrinho de consulta" e enviar a sua consulta, a utsource enviará um e-mail de cotação para si.
Se precisar de adicionar instruções adicionais sobre pedidos, como Nota fiscal ou Recibo, coloque-as na página de informações sobre pedidos.
Todas as informações do pedido podem ser verificadas na página "centro da conta"
Por favor, confirme a descrição do produto ao fazer o pedido.
O pedido não pode ser cancelado após o envio. Por favor, envie um e-mail para o atendimento ao cliente para rever os detalhes do pedido antes do envio.
A versão do navegador Utsource Mobile e o APP podem ser transferidos para encontrar peças a qualquer momento, em qualquer lugar, se necessário.
Escolha o idioma e a moeda certos para fazer o pedido, se necessário.

Pagamento

O UTSOURCE suporta pagamentos globais, incluindo os principais PAYPAL dos EUA, cartões de crédito (VISA, MASTERCARD, AMERICAN EXPRESS, JCB), WEST UNION, Moneygram;
Pagamento popular na Europa: SofortBanking, Trustpay, Paysafecard;
Médio Oriente: CashU, Onecard;
Sudeste Asiático: MOLPay;
Comumente usado na Rússia: Qiwi, Yandex Money, WebMoney;
Pagamento holandês: iDEAL, Polish Dotpay,
Pagamento brasileiro: Boleto
Estes pagamentos acima têm uma alta participação de mercado na área local, com melhor experiência de pagamento, método de pagamento mais simples.

Frete

USPS, FedEx, DHL e UPS podem ser selecionados.
Expresso: (FEDEX, UPS, DHL, TNT) Envio grátis nos primeiros 0,5 kg para pedidos acima de US$ 200, o excesso de peso será cobrado separadamente.
Está disponível para os utilizadores ao selecionar "Portes a Pagar", dependendo dos seus requisitos
Pode custar taxas remotas adicionais para entrega se estiver numa área remota.
O preço do envio do seu pedido será calculado automaticamente no carrinho de compras. Se tiver alguma dúvida sobre os custos de envio, escreva-nos e nós confirmamos manualmente.
Para peças em stock, os pedidos normalmente podem ser enviados dentro de 1-2 dias.
Data de entrega: geralmente 2 a 5 dias úteis.
O Número de Rastreamento da Encomenda será enviado por e-mail ou pode aceder à APP ou ao site "centro da conta" para verificar quando o pedido for enviado.
A fatura pode ser transferida em "centro da conta" > "a minha fatura", se necessário

Cupão de Presente/Serviço Plus

Pode receber um cupão de envio de US$ 5 (aplicável a novos utilizadores)
Oferecer um serviço de teste gratuito PLUS de 30 dias (o serviço plus será interrompido automaticamente após o final do teste e não será gerado nenhum custo extra. Os preços das mercadorias geralmente têm uma redução de 10%)
Conta de fundos" pode ser usada para a sua próxima compra de pedido. Se tiver dinheiro devolvido à sua "conta de fundos". (pode verificá-lo em "A minha conta" > "Conta de fundos")
A Utsource oferece atendimento profissional ao cliente em todo o mundo nos EUA, México, Brasil, Itália, França, Alemanha e muitos outros lugares.

Devolução

As devoluções são normalmente aceites quando concluídas no prazo de 60 dias a partir da data de entrega da encomenda.

Defeito (Por favor forneça um relatório de qualidade de terceiros sobre produtos não conformes)

As taxas de portes de envio de devolução devem ser pagas antecipadamente; não aceitaremos remessas de COD.

Política de Garantia

Todas as compras da UTSOURCE têm uma política de devolução do dinheiro de 60 dias, além de uma garantia de 90 dias da UTSOURCE contra defeitos de fabricação. Esta garantia não se aplica a qualquer item em que os defeitos tenham sido causados por montagem inadequada do cliente, falha do cliente em seguir instruções, modificação do produto, operação negligente ou inadequada.

Pesquisa Relacionada

AD536AJDZ Preço
AD536AJDZ Pdf
AD536AJDZ Difícil de Encontrar
AD536AJDZ Pinout
AD536AJDZ Obsoleto
AD536AJDZ Imagem
AD536AJDZ Comprar
AD536AJDZ Foto
AD536AJDZ Vender
AD536AJDZ Em Stock
AD536AJDZ Pesquisar
AD536AJDZ Distribuidor
AD536AJDZ Manual de dados
AD536AJDZ Novos&originais
AD536AJDZ Utilização
AD536AJDZ Série
AD536AJDZ Substituição
AD536AJDZ TI(Analog Devices)
AD536AJDZ find
AD536AJDZ purchase
AD536AJDZ need
AD536AJDZ shopping
AD536AJDZ store
AD536AJDZ Barato
AD536AJDZ transistor
AD536AJDZ equivalent
AD536AJDZ Componente eletronico
AD536AJDZ The AD536A is a complete monolithic integrated circuit that performs true rms-to-dc conversion. It offers performance comparable or superior to that of hybrid or modular units costing much more. The AD536A directly computes the true rms value of any complex input waveform containing ac and dc components. A crest factor compensation scheme allows measurements with 1% error at crest factors up to 7. The wide bandwidth of the device extends the measurement capability to 300 kHz with less than 3 dB errors for signal levels greater than 100 mV. An important feature of the AD536A, not previously available in rms converters, is an auxiliary dB output pin. The logarithm of the rms output signal is brought out to a separate pin to allow the dB conversion, with a useful dynamic range of 60 dB. Using an externally supplied reference current, the 0 dB level can be conveniently set to correspond to any input level from 0.1 V to 2 V rms. The AD536A is laser trimmed to minimize input and output offset voltage, to optimize positive and negative waveform symmetry (dc reversal error), and to provide full-scale accuracy at 7 V rms. As a result, no external trims are required to achieve the rated unit accuracy. The input and output pins are fully protected. The input circuitry can take overload voltages well beyond the supply levels. Loss of supply voltage with the input connected to external circuitry does not cause the device to fail. The output is short-circuit protected. The AD536A is available in two accuracy grades (J and K) for commercial temperature range (0°C to 70°C) applications, and one grade (S) rated for the ?55°C to +125°C extended range. The AD536AK offers a maximum total error of ±2 mV ± 0.2% of reading, while the AD536AJ and AD536AS have maximum errors of ±5 mV ± 0.5% of reading. All three versions are available in a hermetically sealed 14-lead DIP or a 10-pin TO-100 metal header package. The AD536AS is also available in a 20-terminal leadless hermetically sealed ceramic chip carrier. The AD536A computes the true root-mean-square level of a complex ac (or ac plus dc) input signal and provides an equivalent dc output level. The true rms value of a waveform is a more useful quantity than the average rectified value because it relates directly to the power of the signal. The rms value of a statistical signal also relates to its standard deviation. An external capacitor is required to perform measurements to the fully specified accuracy. The value of this capacitor determines the low frequency ac accuracy, ripple amplitude, and settling time. The AD536A operates equally well from split supplies or a single supply with total supply levels from 5 V to 36 V. With 1 mA quiescent supply current, the device is well suited for a wide variety of remote controllers and battery-powered instruments.

Fornecedor Relacionado

Modelo Nome do Vendedor Estoque Marcas Encapsulamento Número de lote Descrição do produto Preço

Nomes Alternativos

AD536AJDZ

AD536AJDZ tem várias marcas em todo o mundo que podem ter nomes alternativos para AD536AJDZ devido a diferenças ou aquisições regionais. AD536AJDZ também pode ser conhecido como os seguintes nomes: