≥1:
S$2.64959
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Home > Elec-component > IC Chips > PMIC - Motor Drivers, Controllers
TSSOP28
Allegro
18+
The L297D is a Stepper Motor Controller IC generates 4-phase drive signals for 2-phase bi-polar and 4-phase uni-polar step motors in micro-computer controlled applications. The motor can be driven in half step, normal and wave drive modes and on-chip PWM chopper circuits permit switch-mode control of the current in the windings. A feature of this device is that it requires only clock, direction and mode input signals. Since the phase are generated internally the burden on the microprocessor and the programmer, is greatly reduced. This can be used with monolithic bridge drives such as the L298N or L293E or with discrete transistors and Darlingtons.
Description: The A3944KLPTR-T is a microstepping motor driver IC with a built-in translator for easy operation. It is designed to operate bipolar stepper motors in full-, half-, quarter-, and eighth-s
Stock:10000
Minimum:2
Favorite
SOP-20
STMicroelectronics
08+
The L297D is a Stepper Motor Controller IC generates 4-phase drive signals for 2-phase bi-polar and 4-phase uni-polar step motors in micro-computer controlled applications. The motor can be driven in half step, normal and wave drive modes and on-chip PWM chopper circuits permit switch-mode control of the current in the windings. A feature of this device is that it requires only clock, direction and mode input signals. Since the phase are generated internally the burden on the microprocessor and the programmer, is greatly reduced. This can be used with monolithic bridge drives such as the L298N or L293E or with discrete transistors and Darlingtons.
Description: The L297D is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and bipolar stepping motors. Features: Dual full-bridge driver High output current
Stock:10000
Minimum:2
Favorite
ZIP
Sanken Electric
10+
The L297D is a Stepper Motor Controller IC generates 4-phase drive signals for 2-phase bi-polar and 4-phase uni-polar step motors in micro-computer controlled applications. The motor can be driven in half step, normal and wave drive modes and on-chip PWM chopper circuits permit switch-mode control of the current in the windings. A feature of this device is that it requires only clock, direction and mode input signals. Since the phase are generated internally the burden on the microprocessor and the programmer, is greatly reduced. This can be used with monolithic bridge drives such as the L298N or L293E or with discrete transistors and Darlingtons.
Description: SLA7024M is a three-phase brushless motor driver IC manufactured by Sanken Electric Co., Ltd. It is designed to drive three-phase brushless motors with a maximum output current of 2.4A.
Stock:10000
Minimum:2
Favorite
SOP
Allegro
1441+
The L297D is a Stepper Motor Controller IC generates 4-phase drive signals for 2-phase bi-polar and 4-phase uni-polar step motors in micro-computer controlled applications. The motor can be driven in half step, normal and wave drive modes and on-chip PWM chopper circuits permit switch-mode control of the current in the windings. A feature of this device is that it requires only clock, direction and mode input signals. Since the phase are generated internally the burden on the microprocessor and the programmer, is greatly reduced. This can be used with monolithic bridge drives such as the L298N or L293E or with discrete transistors and Darlingtons.
Description: A4949GLJTR-T is a motor driver IC from Allegro Microsystems. It is a dual full-bridge driver IC with integrated MOSFETs and a low-side current sense amplifier. Features: Low-side curren
Stock:10000
Minimum:2
Favorite
Description: A8904SLB is a high-performance, low-cost, high-efficiency, low-side gate driver IC designed for driving N-channel MOSFETs and IGBTs. Features: Low-side gate driver Operates from 4.5V
Stock:10000
Minimum:1
Favorite
Description: The L293DD is a quadruple high-current half-H driver. Features: Output current up to 1A per channel Output clamp diodes for inductive transient suppression Separate logic supply TTL c
Stock:10000
Minimum:2
Favorite
SOP-20
STMicroelectronics
The L297D is a Stepper Motor Controller IC generates 4-phase drive signals for 2-phase bi-polar and 4-phase uni-polar step motors in micro-computer controlled applications. The motor can be driven in half step, normal and wave drive modes and on-chip PWM chopper circuits permit switch-mode control of the current in the windings. A feature of this device is that it requires only clock, direction and mode input signals. Since the phase are generated internally the burden on the microprocessor and the programmer, is greatly reduced. This can be used with monolithic bridge drives such as the L298N or L293E or with discrete transistors and Darlingtons.
Stock:10000
Minimum:5
Favorite
SIP19
On进口
The L297D is a Stepper Motor Controller IC generates 4-phase drive signals for 2-phase bi-polar and 4-phase uni-polar step motors in micro-computer controlled applications. The motor can be driven in half step, normal and wave drive modes and on-chip PWM chopper circuits permit switch-mode control of the current in the windings. A feature of this device is that it requires only clock, direction and mode input signals. Since the phase are generated internally the burden on the microprocessor and the programmer, is greatly reduced. This can be used with monolithic bridge drives such as the L298N or L293E or with discrete transistors and Darlingtons.
Description: STK672-630CN-E is a SIP19 package, N-channel MOSFET transistor manufactured by ON Semiconductor. Features: - Low On-Resistance - Low Gate Charge - Low Input Capacitance - Fast Switching
Stock:10000
Minimum:10
Favorite
QFN36
Freescale
13+
The L297D is a Stepper Motor Controller IC generates 4-phase drive signals for 2-phase bi-polar and 4-phase uni-polar step motors in micro-computer controlled applications. The motor can be driven in half step, normal and wave drive modes and on-chip PWM chopper circuits permit switch-mode control of the current in the windings. A feature of this device is that it requires only clock, direction and mode input signals. Since the phase are generated internally the burden on the microprocessor and the programmer, is greatly reduced. This can be used with monolithic bridge drives such as the L298N or L293E or with discrete transistors and Darlingtons.
Description: The MC33887 is a high voltage, high current, dual full bridge motor driver with integrated power MOSFETs. Features: Integrated power MOSFETs High voltage, high current Dual full bridge
Stock:10000
Minimum:1
Favorite
Description: DMOS Full Bridge Motor Driver Features: - High voltage capability up to 40V - High current capability up to 3A - Low RDS(on) - Low power dissipation - Short circuit protection - Th
Stock:2000
Minimum:1
Favorite
PLCC28
JRC
05+
The L297D is a Stepper Motor Controller IC generates 4-phase drive signals for 2-phase bi-polar and 4-phase uni-polar step motors in micro-computer controlled applications. The motor can be driven in half step, normal and wave drive modes and on-chip PWM chopper circuits permit switch-mode control of the current in the windings. A feature of this device is that it requires only clock, direction and mode input signals. Since the phase are generated internally the burden on the microprocessor and the programmer, is greatly reduced. This can be used with monolithic bridge drives such as the L298N or L293E or with discrete transistors and Darlingtons.
Description: The NJM3717FM2 is a dual operational amplifier manufactured by JRC. It is a low power, low noise, high speed, and high output current amplifier. Features: Low power consumption: 1.2 mA
Stock:10000
Minimum:2
Favorite
SOP
ROHM Semiconductor
11+PB
The L297D is a Stepper Motor Controller IC generates 4-phase drive signals for 2-phase bi-polar and 4-phase uni-polar step motors in micro-computer controlled applications. The motor can be driven in half step, normal and wave drive modes and on-chip PWM chopper circuits permit switch-mode control of the current in the windings. A feature of this device is that it requires only clock, direction and mode input signals. Since the phase are generated internally the burden on the microprocessor and the programmer, is greatly reduced. This can be used with monolithic bridge drives such as the L298N or L293E or with discrete transistors and Darlingtons.
Description: The BA5839FP-E2 is a monolithic integrated circuit developed by Rohm Semiconductor. It is an audio power amplifier IC designed for use in car audio systems. Features: - Output power: 2 x
Stock:10000
Minimum:3
Favorite
Description: The UDN2916EB is a high-voltage, high-current Darlington transistor array. It consists of eight NPN Darlington pairs that feature high-voltage outputs with common-cathode clamp diodes for
Stock:5000
Minimum:1
Favorite
Description: L6205PD is a full bridge motor driver IC, manufactured by STMicroelectronics. It is designed to drive two DC motors in a wide range of applications, such as automotive, industrial, and co
Stock:5000
Minimum:1
Favorite
TSSOP28
Allegro
15+
The L297D is a Stepper Motor Controller IC generates 4-phase drive signals for 2-phase bi-polar and 4-phase uni-polar step motors in micro-computer controlled applications. The motor can be driven in half step, normal and wave drive modes and on-chip PWM chopper circuits permit switch-mode control of the current in the windings. A feature of this device is that it requires only clock, direction and mode input signals. Since the phase are generated internally the burden on the microprocessor and the programmer, is greatly reduced. This can be used with monolithic bridge drives such as the L298N or L293E or with discrete transistors and Darlingtons.
Description: The A3979SLPTR-T is an easy-to-use, microstepping motor driver with built-in translator for easy operation. It is designed to operate bipolar stepper motors in full-, half-, quarter-, and
Stock:10000
Minimum:1
Favorite
DFN10
Allegro
16+
The L297D is a Stepper Motor Controller IC generates 4-phase drive signals for 2-phase bi-polar and 4-phase uni-polar step motors in micro-computer controlled applications. The motor can be driven in half step, normal and wave drive modes and on-chip PWM chopper circuits permit switch-mode control of the current in the windings. A feature of this device is that it requires only clock, direction and mode input signals. Since the phase are generated internally the burden on the microprocessor and the programmer, is greatly reduced. This can be used with monolithic bridge drives such as the L298N or L293E or with discrete transistors and Darlingtons.
Description: The A3901SEJTR-T is an integrated circuit (IC) from Allegro MicroSystems. It is a low-voltage, high-current, three-phase brushless DC (BLDC) motor controller. Features: * Low voltage ope
Stock:10000
Minimum:5
Favorite
SOP8
ROHM Semiconductor
11+
The L297D is a Stepper Motor Controller IC generates 4-phase drive signals for 2-phase bi-polar and 4-phase uni-polar step motors in micro-computer controlled applications. The motor can be driven in half step, normal and wave drive modes and on-chip PWM chopper circuits permit switch-mode control of the current in the windings. A feature of this device is that it requires only clock, direction and mode input signals. Since the phase are generated internally the burden on the microprocessor and the programmer, is greatly reduced. This can be used with monolithic bridge drives such as the L298N or L293E or with discrete transistors and Darlingtons.
Description: The BA6289F-E2 is an IC from ROHM Semiconductor that is a high-efficiency, low-noise, low-distortion, and low-ripple DC/DC converter. Features: Wide input voltage range: 4.5 V to 40 V
Stock:10000
Minimum:5
Favorite
The A3935KLQ is an integrated circuit (IC) from Allegro MicroSystems. It is a high-performance, low-cost, three-phase brushless DC motor driver IC. It is designed to drive brushless DC motors in a wid
Stock:10000
Minimum:2
Favorite
TSSOP
Allegro
1439+
The L297D is a Stepper Motor Controller IC generates 4-phase drive signals for 2-phase bi-polar and 4-phase uni-polar step motors in micro-computer controlled applications. The motor can be driven in half step, normal and wave drive modes and on-chip PWM chopper circuits permit switch-mode control of the current in the windings. A feature of this device is that it requires only clock, direction and mode input signals. Since the phase are generated internally the burden on the microprocessor and the programmer, is greatly reduced. This can be used with monolithic bridge drives such as the L298N or L293E or with discrete transistors and Darlingtons.
Description: The A3942KLGTR-T is a high-performance, easy-to-use, integrated motor driver IC from Allegro Microsystems. It is designed to drive a single bipolar stepper motor with a maximum current of
Stock:10000
Minimum:2
Favorite
Description: The BA6222 is a high-performance dual operational amplifier that is manufactured by ROHM Semiconductor. It is a low-power, low-noise, high-speed, and low-distortion amplifier with a wide
Stock:10000
Minimum:2
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company