≥1:
S$7.49893
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Stock:10000
Minimum:1
Favorite
SOT-23
National Semiconductor
07+
SOT-23 Precision Low Dropout Voltage Reference
Stock:10000
Minimum:1
Favorite
SOT23
National Semiconductor
07/
Precision Micropower Shunt Voltage Reference
Stock:10000
Minimum:2
Favorite
CAN8
Analog Devices
04+
The AD584 is an 8-terminal precision voltage reference offering pin programmable selection of four popular output voltages: 10.000 V, 7.500 V, 5.000 V and 2.500 V. Other output voltages, above, below, or between the four standard outputs, are available by the addition of external resistors. The input voltage can vary between 4.5 V and 30 V. Laser wafer trimming (LWT) is used to adjust the pin programmable output levels and temperature coefficients, resulting in the most flexible high precision voltage reference available in monolithic form. In addition to the programmable output voltages, the AD584 offers a unique strobe terminal that permits the device to be turned on or off. When the AD584 is used as a power supply reference, the supply can be switched off with a single, low power signal. In the off state, the current drained by the AD584 is reduced to approximately 100 ?A. In the on state, the total supply current is typically 750 ?A, including the output buffer amplifier. The AD584 is recommended for use as a reference for 8-, 10-, or 12-bit digital-to-analog converters (DACs) that require an external precision reference. In addition, the device is ideal for analog-to-digital converters (ADCs) of up to 14-bit accuracy, either successive approximation or integrating designs, and in general, it can offer better performance than that provided by standard self-contained references. The AD584J and AD584K are specified for operation from 0°C to +70°C, and the AD584S and AD584T are specified for the ?55°C to +125°C range. All grades are packaged in a hermetically sealed, eight-terminal TO-99 metal can, and the AD584J and AD584K are also available in an 8-lead PDIP.
Description: The AD584KH is a precision voltage reference IC from Analog Devices. It is a three-terminal device that provides a stable, low-temperature coefficient, 4.096V output voltage. Features:
Stock:10000
Minimum:1
Favorite
SC-74A, SOT-753
National Semiconductor
07+
Precision Micropower Low Dropout Voltage Reference
Stock:10000
Minimum:1
Favorite
Stock:10000
Minimum:2
Favorite
SOP-8
Maxim Integrated
0636/
Low-Noise, Precision, +2.5V/+4.096V/+5V Voltage References
Description: Low-Voltage, Low-Power, Microprocessor Supervisory Circuits Features: Low Supply-Voltage Range: 1.8V to 5.5V Low Supply-Current Consumption: 0.5μA (Typ) Watchdog Timer with Separ
Stock:10000
Minimum:1
Favorite
Description: The AD584JH is a precision, low power, temperature-to-voltage converter. Features: Low power: 2.5 mW at +25°C High accuracy: 0.5°C max over 0°C to +70°C Low offset voltage: 0.1 mV max
Stock:5000
Minimum:1
Favorite
Stock:2000
Minimum:1
Favorite
The ADR01BRZ is an ultra-low power, low-noise, low-dropout (LDO) linear regulator from Analog Devices. It is capable of providing up to 200 mA of output current and has an adjustable output voltage ra
Stock:10000
Minimum:1
Favorite
TO-92
Fairchild
Adjustable/2.5V, 1% Tolerance Shunt Regulator; Package: TO-92R; No of Pins: 3; Container: Ammo
Stock:10000
Minimum:13
Favorite
Stock:5000
Minimum:1
Favorite
Stock:10000
Minimum:2
Favorite
The REF102CP is a precision voltage reference from Texas Instruments. It is a two-terminal bandgap voltage reference that provides a stable and accurate output voltage of 10V. It is available in a 8-p
Stock:10000
Minimum:1
Favorite
LM431BIM is a precision adjustable shunt regulator manufactured by National Semiconductor. It is a three-terminal adjustable voltage regulator that can be used to provide a stable output voltage from
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:4
Favorite
Stock:10000
Minimum:4
Favorite
TO-92
National Semiconductor
04+
Precision Micropower Shunt Voltage Reference
Stock:10000
Minimum:2
Favorite
SOT-23
National Semiconductor
07+
Low-Voltage 1.24V Adjustable Precision Shunt Regulators
Stock:10000
Minimum:4
Favorite
SOP-8
Maxim Integrated
00+
8-Bit Identity/Magnitude Comparators P=Q with Enable 20-CDIP -55 to 125
Stock:10000
Minimum:2
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company