PMIC - Voltage Reference

The AD584 is an 8-terminal precision voltage reference offering pin programmable selection of four popular output voltages: 10.000 V, 7.500 V, 5.000 V and 2.500 V. Other output voltages, above, below, or between the four standard outputs, are available by the addition of external resistors. The input voltage can vary between 4.5 V and 30 V. Laser wafer trimming (LWT) is used to adjust the pin programmable output levels and temperature coefficients, resulting in the most flexible high precision voltage reference available in monolithic form. In addition to the programmable output voltages, the AD584 offers a unique strobe terminal that permits the device to be turned on or off. When the AD584 is used as a power supply reference, the supply can be switched off with a single, low power signal. In the off state, the current drained by the AD584 is reduced to approximately 100 ?A. In the on state, the total supply current is typically 750 ?A, including the output buffer amplifier. The AD584 is recommended for use as a reference for 8-, 10-, or 12-bit digital-to-analog converters (DACs) that require an external precision reference. In addition, the device is ideal for analog-to-digital converters (ADCs) of up to 14-bit accuracy, either successive approximation or integrating designs, and in general, it can offer better performance than that provided by standard self-contained references. The AD584J and AD584K are specified for operation from 0°C to +70°C, and the AD584S and AD584T are specified for the ?55°C to +125°C range. All grades are packaged in a hermetically sealed, eight-terminal TO-99 metal can, and the AD584J and AD584K are also available in an 8-lead PDIP.

LM185-1.2/LM285-1.2/LM385-1.2 Micropower Voltage Reference Diode; Package: TO-92; No of Pins: 3; Qty per Container: 1800/Box

The AD586 represents a major advance in the state-of-the-art in monolithic voltage references. Using a proprietary ion-implanted buried Zener diode and laser wafer trimming of high stability thin-film resistors, the AD586 provides outstanding performance at low cost. The AD586 offers much higher performance than most other 5 V references. Because the AD586 uses an industry standard pinout, many systems can be upgraded instantly with the AD586. The buried Zener approach to reference design provides lower noise and drift than bandgap voltage references. The AD586 offers a noise reduction pin which can be used to further reduce the noise level generated by the buried Zener. The AD586 is recommended for use as a reference for 8-, 10-, 12-, 14- or 16-bit D/A converters which require an external precision reference. The device is also ideal for successive approximation or integrating A/D converters with up to 14 bits of accuracy and, in general, can offer better performance than the standard on-chip references. The AD586J, K, L and M are specified for operation from 0°C to +70°C, the AD586A and B are specified for -40°C to +85°C operation, and the AD586S and T are specified for -55°C to +125°C operation. The AD586J, K, L and M are available in an 8-pin plastic DIP. The AD586J, K, L, A and B are available in an 8-pin plastic surface mount small outline (SO) package. The AD586J, K, L, S and T are available in an 8-pin cerdip package.

+5V, +10V Precision Voltage References

Micropower Voltage Reference Diodes

Ultracompact, Precision 10.0 V Voltage References

PROGRAMMABLE VOLTAGE REFERENCE

Bandgap, Low Power 2.5v Reference

+5V Precision Voltage Reference/Temperature Transducer

LM136-5.0 LM236-5.0 LM336-5.0 5.0V Reference Diode; Package: TO-92; No of Pins: 3; Qty per Container: 1800/Box

Low-Noise, Precision, +2.5V/+4.096V/+5V Voltage References

High Precision 5 V Reference

IC VREF SERIES 0.3% 8CERDIP

V-Ref Precision 2.5V 10mA 8-Pin SOIC N Tube

Adjustable Precision Zener Shunt Regulator

1-OUTPUT TWO TERM VOLTAGE REFERENCE, 1.24V, PBCY3, PLASTIC, TO-92, 3 PIN

LM4040 Precision Micropower Shunt Voltage Reference; Package: SOT-23; No of Pins: 3; Qty per Container: 3000/Reel

High Precision 5 V Reference

Precision Micropower, Low Dropout Voltage References

+10V Precision Voltage Reference