Product video Product Picture

SN74S124N The 'S124 features two independent voltage-controlled oscillators (VCO) in a single monolithic chip. The output frequency of each VCO is established by an external capacitor in combination with two voltage-sensitive inputs, one for frequency range and one for frequency control. These inputs can be used to vary the output frequency as shown under typical characteristics. These highly stable oscillators can be set to operate at any frequency typically between 0.12 hertz and 85 megahertz.
While the enable input is low, the output is enabled. While the enable input is high, the output is high.
These devices can operate from a single 5-volt supply. However, one set of supply-voltage and ground pins (VCC and GND) is provided for the enable, synchronization-gating, and output sections, and a separate set ( GND) and is provided for the oscillator and associated frequency-control circuits so that effective isolation can be accomplished in the system.
The enable input of these devices starts or stops the output pulses when it is low or high, respectively. The internal oscillator of the 'S124 is started and stopped by the enable input. The enable input is one standard load<br/> it and the buffered output operate at standard Schottky-clamped TTL levels.
The pulse synchronization-gating section ensures that the first output pulse is neither clipped nor extended. Duty cycle of the square-wave output is fixed at approximately 50 percent.
The SN54S124 is characterized for operation over the full military temperature range of –55°C to 125°C<br/> the SN74S124 is characterized for operation from 0°C to 70°C.

Sales：2

113521

5.0 out of 5 stars

1 star 0.3%

2 star 0%

3 star 0.2%

4 star 0.4%

5 star 99.1%

Total products: 2398055

Total sales: 12724315

Average lead time: 0 Hour

Delivery times (Express): 0

Delivery times (Post office): 0

Favorite

SN74S124N

USED

Utsource certified used parts

Utsource certified used parts provide the following guarantees:

1. Utsource will inspect the goods, including appearance inspection (no serious damage to the appearance), select qualified and honest suppliers, and ensure 98% qualification rate.

2. Some parts are tested by machine.

3. Utsource certified parts can be returned and refunded unconditionally within 60 days.

Description

The 'S124 features two independent voltage-controlled oscillators (VCO) in a single monolithic chip. The output frequency of each VCO is established by an external capacitor in combination with two voltage-sensitive inputs, one for frequency range and one for frequency control. These inputs can be used to vary the output frequency as shown under typical characteristics. These highly stable oscillators can be set to operate at any frequency typically between 0.12 hertz and 85 megahertz. While the enable input is low, the output is enabled. While the enable input is high, the output is high. These devices can operate from a single 5-volt supply. However, one set of supply-voltage and ground pins (VCC and GND) is provided for the enable, synchronization-gating, and output sections, and a separate set ( GND) and is provided for the oscillator and associated frequency-control circuits so that effective isolation can be accomplished in the system. The enable input of these devices starts or stops the output pulses when it is low or high, respectively. The internal oscillator of the 'S124 is started and stopped by the enable input. The enable input is one standard load
it and the buffered output operate at standard Schottky-clamped TTL levels. The pulse synchronization-gating section ensures that the first output pulse is neither clipped nor extended. Duty cycle of the square-wave output is fixed at approximately 50 percent. The SN54S124 is characterized for operation over the full military temperature range of –55°C to 125°C
the SN74S124 is characterized for operation from 0°C to 70°C.

Not found, similar datasheet recommended

Title

Dual Voltage-Controlled Oscillators

ECAD Module
Series: 74S
Brand: Texas Instruments
Package / Case: DIP-16
Packaging: Tube
Part Status: Active
Type: VCO (Dual)
Count: -
Frequency: 1Hz ~ 60MHz
Voltage - Supply: 4.75 V ~ 5.25 V
Current - Supply: 105mA
Operating Temperature: 0°C ~ 70°C
Supplier Device Package: 16-PDIP
Mounting Type: Through Hole

All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

ECAD Module

Product Attributes

The SN74S124N is a 16-pin dual retriggerable monostable multivibrator (DIP) manufactured by Texas Instruments. It is designed to provide a pulse of a predetermined duration when triggered by an external signal. Features: * Wide supply voltage range: 3V to 15V * Low power consumption * High noise immunity * Low propagation delay * TTL compatible Applications: * Pulse generation * Timing * Pulse width modulation * Frequency division * Pulse position modulation * Pulse stretching (For reference only)

Preview of the first 3 pages of the data sheet

Document Preview

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

Related products with the same datasheet

AMC1336-Q1

Automotive reinforced isolated delta-sigma modulator for voltage sensing with ±1-V input range. Input range (Vp-p) : 1V, Interface type : Serial CMOS, Rating : Automotive, Isolation (kV peak) : 8, CMTI

SN74LVCZ161284A

19-Bit IEEE 1284 Std Bus Interface. Technology Family : LVC, VCC Min : 3V, VCC Max : 3.6V, Rating : Catalog, Input type : TTL-compatible

CY74FCT162373T

16-Bit Transparent D-Type Latches with 3-State Outputs. Technology Family : FCT, VCC Min : 4.5V, VCC Max : 5.5V, Channels : 16#, Rating : Catalog, Input type

SN74F151B

8-Line To 1-Line Data Selector/Multiplexer. Technology Family : F, VCC Min : 4.5V, VCC Max : 5.5V, Channels : 1#, Rating : Catalog, Operating temperature

OPA875

Single-channel, 700MHz, op amp with 2:1 high-speed multiplexer . Number of channels : 2#, Total supply voltage Min : -5+5V=5, +/-5V=10, Total supply voltage Max : 5+5V=5,

LMH6618

Single 130 MHz, 1.25 mA RRIO Operational Amplifiers. Number of channels : 1#, Total supply voltage Min : 2.7+5V=5, +/-5V=10, Total supply voltage Max : 11+5V=5,

LMV982-N

Dual 1.8V, RRIO Operational Amplifiers with Shutdown. Number of channels : 2#, Total supply voltage Min : 1.8+5V=5, +/-5V=10, Total supply voltage Max : 5+5V=5,

LMX2434

5.0 GHz/2.5 GHz PLLatinum Low Power Dual Frequency Synthesizer for RF Personal Communications. Integrated VCO : No, Output frequency Min : 1000MHz, Output frequency Max : 5000MHz, Normalized PLL phase

TRPGR30ENATGA

23-mm LF Glass-Encapsulated Transponder R/O, EN 14803 Numbering. Throughput Max : N/AMbps, Rating : Catalog, Data rate Max : kbps, Product type :

TPS28225

4-A, 27-V half bridge gate driver with 4-V UVLO for synchronous rectification. Bus voltage Max : 24V, Power switch : MOSFET, Input VCC Min : 4.5V, Input VCC Max : 8V, Peak output current

Some Part number from the same manufacture

HMC6475

HMC1161

HMC1163

HMC507

HMC511

HMC583

HMC764

ADF4153

ADF4155

HMC704

Same catergory

NE556N

IC OSC TIMER DUAL 100KHZ 14-DIP

NE555DRE4

IC OSC SGL TIMER 100KHZ 8-SOIC

NE555DRG4

IC OSC SGL TIMER 100KHZ 8-SOIC

NE555PSRE4

IC OSC SINGLE TIMER 100KHZ 8SO

LM555CMX/NOPB

IC OSC SGL TIMER 100KHZ 8-SOIC

TLC555CD

IC OSC SGL TIMER 2.1MHZ 8-SOIC

CD4541BCN

IC OSC PROG TIMER 100KHZ 14DIP

TS555CDT

IC OSC SGL TIMER 2.7MHZ 8-SOIC

Product Reviews

Submit

11 buyer reviews from Singapore

George Chan

MC14106B

Italy Rome

Length of registration:16 years

The goods have been received. The packaging is very good. By the way, there are not a few in the list. The logistics is also very fast

Reply0

09/02/2022

Vincent Loh

M27C512-12F1

Singapore Singapore

Length of registration:5 years

Good

Reply0

03/18/2019

Steven Tan

STR-Z2151

Singapore Singapore

Length of registration:6 years

Very satisfied with

Reply0

11/28/2018

Doris Boo

2MBI400U2B-060

Singapore Singapore

Length of registration:14 years

Very well-packed

Reply0

01/05/2017

See all reviews >>

Payment Method

European payment method

Asia payment method

America payment method

International payment method

Shopping process

Search on the website

Send an inquiry
Add to Cart

Add to inquiry cart

Quote
Place Order
Goods warehousing

Package

Ship order out

Latest shipping video More

Shopping Guide Related Search Related Supplier Alternate Names

Shopping Guide

Order

Users could add parts to cart and upload BOM when they searching parts, calculate cost in a second, offer you the best bill of materials.
Some specific products need to reach the minimum order quantity.
Users could get coupons randomly when they applied plus member. Utsource offers different buying options with different product quality from different seller stores when placing orders.
Users could add products to“inquiry cart" and submit your inquiry, utsource will send quotation email to you.
If you need add additional order instructions like Tax Invoice or Remark, please put them on the ordering information page.
All order information could be checked in your "account center"page
Please confirm the product description when placing order.
The order can’t be canceled after shipment, so please email customer service to revise order details before shipment.
Utsource Mobile browser version and APP could be downloaded to find parts anytime, anywhere if needed.
Please choose right language and currency to place order if needed.

Payment

UTSOURCE supports global payments, including mainstream US PAYPAL, credit cards (VISA, MASTERCARD, AMERICAN EXPRESS, JCB), WEST UNION, Moneygram;
Popular payment in Europe: SofortBanking, Trustpay, Paysafecard;
Middle East: CashU, Onecard;
Southeast Asia : MOLPay;
Russia commonly used: Qiwi, Yandex Money, WebMoney;
The Dutch payment: iDEAL, Polish Dotpay,
Brazilian payment: Boleto
These above payments have a high market share in the local area with better payment experience, simpler payment method.

Shipping

USPS, FedEx, DHL, and UPS could be selected.
Express: (FEDEX, UPS, DHL, TNT)Free shipping on first 0.5kg for orders over 200$, Overweight will be charged separately.
It is available for users to select "Freight Collect"depending on their requirement
It may cost additional remote fees for delivery if you are in a remote area.
Shipping price for your order will be calculated automatically in the shopping cart.If you have any questions about shipping costs, you can write to us and we will confirm it manually.
For in-stock parts, orders normally could be shipped out within 1-2days.
Delivery date: usually 2 to 5 working days.
Shipping Tracking Number will be sent by email or you can go to APP or website "account center" to check once your order has been shipped.
Invoice could be downloaded from "account center" > "my invoice" if needed

Gift Coupon/Plus service

You could receive US $5 shipping coupon (applicable to new users)
Offer 30-day PLUS free trial service( The plus service will be stopped automatically after the end of the trial, and no extra charge will be generated. Commodity prices are usually reduced by 10%)
“Funds account” could be used for your next order purchase If you have money that has been returned to your “Funds account”. (You could check it in “My Account” > “Funds account” )
Utsource offers professional customer service worldwide in USA, Mexico, Brazil, Italy, France, Germany and many other places.

Returning

Returns are normally accepted when completed within 60 days from the date of the parcel delivered.

Defective ( Please provide a third party quality report of nonconforming products)

Return Freight charges must be prepaid; we will not accept COD shipments.

Warranty

All UTSOURCE purchases have a 60 days money back return policy, plus a 90 days UTSOURCE warranty against any manufacturing defects.This warranty shall not apply to any item where defects have been caused by improper customer assembly, failure by customer to follow instructions, product modification, negligent or improper operation.

Related Search

SN74S124N Price
SN74S124N Pdf
SN74S124N Hard to find
SN74S124N Pinout
SN74S124N Obsolete
SN74S124N Image
SN74S124N Buy
SN74S124N Picture
SN74S124N Sell
SN74S124N In Stock
SN74S124N Search
SN74S124N Distributor
SN74S124N Datasheet
SN74S124N New&Original
SN74S124N Application
SN74S124N Series
SN74S124N Replacement
SN74S124N TI(Texas Instruments)
SN74S124N find
SN74S124N purchase
SN74S124N need
SN74S124N shopping
SN74S124N store
SN74S124N Cheap
SN74S124N transistor
SN74S124N equivalent
SN74S124N Electronic Component
SN74S124N The 'S124 features two independent voltage-controlled oscillators (VCO) in a single monolithic chip. The output frequency of each VCO is established by an external capacitor in combination with two voltage-sensitive inputs, one for frequency range and one for frequency control. These inputs can be used to vary the output frequency as shown under typical characteristics. These highly stable oscillators can be set to operate at any frequency typically between 0.12 hertz and 85 megahertz. While the enable input is low, the output is enabled. While the enable input is high, the output is high. These devices can operate from a single 5-volt supply. However, one set of supply-voltage and ground pins (VCC and GND) is provided for the enable, synchronization-gating, and output sections, and a separate set ( GND) and is provided for the oscillator and associated frequency-control circuits so that effective isolation can be accomplished in the system. The enable input of these devices starts or stops the output pulses when it is low or high, respectively. The internal oscillator of the 'S124 is started and stopped by the enable input. The enable input is one standard load
it and the buffered output operate at standard Schottky-clamped TTL levels. The pulse synchronization-gating section ensures that the first output pulse is neither clipped nor extended. Duty cycle of the square-wave output is fixed at approximately 50 percent. The SN54S124 is characterized for operation over the full military temperature range of –55°C to 125°C
the SN74S124 is characterized for operation from 0°C to 70°C.

Related Supplier

Part Number Seller's Name Stock Brand Package/Case Date Code Description Price

Alternate Names

SN74S124N

SN74S124N has several brands around the world that may have alternate names for SN74S124N due to regional differences or acquisition. SN74S124N may also be known as the following names: