AD587KNZ The AD587 represents a major advance in state-of-the-art monolithic voltage references. Using a proprietary ion-implanted buried Zener diode and laser wafer trimming of high stability thin-film resistors, the AD587 provides outstanding performance at low cost.
The AD587 offers much higher performance than most other 10 V references. Because the AD587 uses an industry-standard pinout, many systems can be upgraded instantly with the AD587.
The buried Zener approach to reference design provides lower noise and drift than band gap voltage references. The AD587 offers a noise-reduction pin that can be used to further reduce the noise level generated by the buried Zener.
The AD587 is recommended for use as a reference for 8-bit, 10-bit, 12-bit, 14-bit, or 16-bit DACs that require an external precision reference. The device is also ideal for successive approximation or integrating ADCs with up to 14 bits of accuracy. In general, it offers better performance than standard on-chip references.
The AD587J and AD587K are specified for operation from 0°C to 70°C, and the AD587U is specified for operation from ?55°C to +125°C. The AD587JQ and AD587UQ models are available in 8-lead CERDIP. Other models are available in an 8-lead SOIC package for surface-mount applications, or in an 8-lead PDIP.
Product Highlights
Laser trimming of both initial accuracy and temperature coefficients. This laser trimming results in very low errors over temperature without the use of external components. The AD587U guarantees ±14 mV maximum total error between ?55°C and +125°C.
Optional fine trim connection. This connection is designed for applications requiring higher precision.
Instant upgrade of any system using an industry-standard pinout 10 V reference.
Very low output noise. AD587 output noise is typically 4 μV p-p. A noise-reduction pin is provided for additional noise filtering using an external capacitor.
MIL-STD-883-compliant versions available. Refer to the Analog Devices Military/Aerospace Reference Manual for detailed specifications.

Sales：1

113521

5.0 out of 5 stars

1 star 0.3%

2 star 0%

3 star 0.2%

4 star 0.4%

5 star 99.1%

Total products: 2398031

Total sales: 12711129

Average lead time: 0 Hour

Delivery times (Express): 0

Delivery times (Post office): 0

Favorite

AD587KNZ

USED

Utsource certified used parts

Utsource certified used parts provide the following guarantees:

1. Utsource will inspect the goods, including appearance inspection (no serious damage to the appearance), select qualified and honest suppliers, and ensure 98% qualification rate.

2. Some parts are tested by machine.

3. Utsource certified parts can be returned and refunded unconditionally within 60 days.

Description

The AD587 represents a major advance in state-of-the-art monolithic voltage references. Using a proprietary ion-implanted buried Zener diode and laser wafer trimming of high stability thin-film resistors, the AD587 provides outstanding performance at low cost. The AD587 offers much higher performance than most other 10 V references. Because the AD587 uses an industry-standard pinout, many systems can be upgraded instantly with the AD587. The buried Zener approach to reference design provides lower noise and drift than band gap voltage references. The AD587 offers a noise-reduction pin that can be used to further reduce the noise level generated by the buried Zener. The AD587 is recommended for use as a reference for 8-bit, 10-bit, 12-bit, 14-bit, or 16-bit DACs that require an external precision reference. The device is also ideal for successive approximation or integrating ADCs with up to 14 bits of accuracy. In general, it offers better performance than standard on-chip references. The AD587J and AD587K are specified for operation from 0°C to 70°C, and the AD587U is specified for operation from ?55°C to +125°C. The AD587JQ and AD587UQ models are available in 8-lead CERDIP. Other models are available in an 8-lead SOIC package for surface-mount applications, or in an 8-lead PDIP. Product Highlights Laser trimming of both initial accuracy and temperature coefficients. This laser trimming results in very low errors over temperature without the use of external components. The AD587U guarantees ±14 mV maximum total error between ?55°C and +125°C. Optional fine trim connection. This connection is designed for applications requiring higher precision. Instant upgrade of any system using an industry-standard pinout 10 V reference. Very low output noise. AD587 output noise is typically 4 μV p-p. A noise-reduction pin is provided for additional noise filtering using an external capacitor. MIL-STD-883-compliant versions available. Refer to the Analog Devices Military/Aerospace Reference Manual for detailed specifications.

Not found, similar datasheet recommended

ECAD Module
Mounting: Through Hole
Brand: Analog Devices
DateCode: 02+
Package / Case: DIP8
Operating Temp Range: 0C to 70C
Package Type: PDIP N
Pin Count: 8
Temperature Coefficient: 10(ppm/°C)
Reference Voltage Accuracy (Max): 5
Operating Temperature Classification: Commercial
Input Voltage (Max): 36 V
Output Voltage (Max): 10(V)
Line Regulation: 100uV/V
Load Regulation: 100uV/mA
Fixed / Adjust / Prog: Precision
Rad Hardened: No
Input Voltage: 36(V)
Packaging: Rail/Tube

Similar Models REF102

All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

ECAD Module

Product Attributes

Description: The AD587KNZ is a precision, low power, low noise, temperature compensated band gap voltage reference. Features: Low Noise: 0.2μVrms (10Hz to 10kHz) Low Temperature Coefficient: 0.1ppm/°C Low Power: 2.5mA Wide Operating Voltage Range: 2.7V to 10V Output Voltage: 10.000V ±0.2% Output Impedance: 0.1Ω Temperature Range: –40°C to +85°C Applications: Battery-Powered Systems Portable Instrumentation Automotive Electronics Data Acquisition Systems Industrial Process Control Medical Instrumentation (For reference only)

Preview of the first 3 pages of the data sheet

Document Preview

FEATURES
Trimmed temperature coefficient 5 ppm/°C maximum (U grade)

Noise-reduction capability Low quiescent current: 4 mA maximum Output trim capability MIL-STD-883-compliant versions available

The AD587 represents a major advance in state-of-the-art monolithic voltage references. Using a proprietary ionimplanted buried Zener diode and laser wafer trimming of high stability thin-film resistors, the AD587 provides outstanding performance at low cost. The AD587 offers much higher performance than most other 10 V references. Because the AD587 uses an industry-standard pinout, many systems can be upgraded instantly with the AD587. The buried Zener approach to reference design provides lower noise and drift than band gap voltage references. The AD587 offers a noise-reduction pin that can be used to further reduce the noise level generated by the buried Zener. The AD587 is recommended for use as a reference for or 16-bit DACs that require an external precision reference. The device is also ideal for successive approximation or integrating ADCs with to 14 bits of accuracy. In general, it offers better performance than standard on-chip references. The AD587J and AD587K are specified for operation from to 70°C, and the AD587U is specified for operation from to +125°C. The AD587JQ and AD587UQ models are available in 8-lead CERDIP. Other models are available an 8-lead SOIC package for surface-mount applications, an 8-lead PDIP.

GND NOTE PIN 1, PIN 3, AND PIN 7 ARE INTERNAL TEST POINTS. NO CONNECTIONS TO THESE POINTS.

1. Laser trimming of both initial accuracy and temperature coefficients. This laser trimming results in very low errors over temperature without the use of external components. The AD587U guarantees ±14 mV maximum total error between -55°C and +125°C.

2. Optional fine trim connection. This connection is designed for applications requiring higher precision.

3. Instant upgrade of any system using an industry-standard pinout 10 V reference.

4. Very low output noise. AD587 output noise is typically 4 V p-p. A noise-reduction pin is provided for additional noise filtering using an external capacitor.

5. MIL-STD-883-compliant versions available. Refer to the Analog Devices Military/Aerospace Reference Manual for detailed specifications.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.

Features : 1 Functional Block Diagram : 1 General Description : 1 Product Highlights : 1 Revision History : 2 Specifications : 3 Absolute Maximum Ratings : 4

ESD Caution : 4 Pin Configuration and Function Descriptions : 5 Theory of Operation : 6

G to Rev. H Deleted AD587L Grade : Universal Change to Product Highlights : 1 Changes to the Negative Reference Voltage from an

AD587 Section : 9 Changes to Figure : 10 Changes to Figure 21 and Figure : 10 Updated Outline Dimensions : 11 Changes to Ordering Guide F to Rev. G Updated Format : Universal Added Table : 5 Updated Outline Dimensions : 11 Changes to Ordering Guide : 13

Noise Performance and Reduction : 6 Turn-On Time : 7 Dynamic Performance : 7 Load Regulation : 8 Temperature Performance : 8 Negative Reference Voltage from : 9 Applications Information : 10 Using the AD587 with Converters : 10 Outline Dimensions : 11 Ordering Guide : 12

E to Rev. F Changes to Ordering Guide D to Rev. E. Deletion of S and T Grades : Universal Edits to Ordering Guide : 2 Deletion of Die Specifications : 3 Edits to Figure : 4 Updated Outline Dimensions : 9

SPECIFICATIONS
LOAD REGULATION1 Sourcing mA < IOUT 10 mA TMIN to TMAX Sourcing mA < IOUT 0 mA2 TMIN to TMAX
QUIESCENT CURRENT POWER DISSIPATION OUTPUT NOISE

10 Hz Spectral Density, 100 Hz LONG-TERM STABILITY SHORT-CIRCUIT CURRENT-TO-GROUND SHORT-CIRCUIT CURRENT-TO-+VIN TEMPERATURE RANGE Specified Performance (J, K) Operating Performance (J, K)3 Specified Performance (U) Operating Performance (U)3

1 Specification is guaranteed for all packages and grades. CERDIP-packaged parts are 100% production tested. 2 Load regulation (sinking) specification for SOIC (R-8) package is ±200 V/mA. 3 The operating temperature range is defined as the temperature extremes at which the device will still function. Parts may deviate from their specified performance

Related products with the same datasheet

LTC1858

. VSupply Unipolar : Yes, ADC Output Sample Rate (max) : 100kSPS, Vref Source : External, Internal, Signal

AD9235

. ADC Output Sample Rate (max) : 20MSPS, Vref Source : External, Internal, Signal to Noise + Distortion

LT1129

. Shutdown : Yes, Accuracy (typ) : %, PSRR at 1 MHz : dB, Theta JA : 30°C/W (Q), 50°C/W (ST), 50°C/W (T),

LTC3421

. Synchronous : Yes, Monolithic : Yes, Vout Min : 2.4V, Output Current : A, Number of Outputs : 1, Integrated

ADUM4190

. # of Channels : 1, Bandwidth -3 dB (typ) : 400kHz, Minimum Total Supply Voltage (Vs+ to Vs-) : 3V, Maximum

ADA4851-2

. Shutdown : No, Bandwidth -3 dB (typ) : 105MHz, Number of Amplifiers per Package : 2, Minimum Total Supply

ADSP-BF538F

. External Memory Bus Width in Bits : 3bits, Number of SPORTs : 4, ADC Resolution : bits, Channels : , External

HMC680

. # of Channels : 1, Shutdown : No, Bandwidth -3 dB (typ) : Hz, Minimum Total Supply Voltage (Vs+ to Vs-)

ADV7401

. Input Type : Analog HD, Analog SD, Graphics, Output Type : Pixel Bus, ADC Cores : 4, Video Primary Function

ADV7392

. Input Type : Pixel Bus, DAC Resolution : 10bits, Output Frequency (max) : 74.24MHz, Output Type : Analog

Some Part number from the same manufacture

ISL21010DFH312

ISL21010DFH312 | Voltage References.

ISL21080CIH333

ISL21080CIH333 | Voltage References.

ISL21090B25

ISL21090B25 | Voltage References.

KA431SA

Adjustable/2.5 V, 1% Tolerance Shunt Regulator.

R3120

36V Input Voltage Detector with Delay Function or SENSE pin.

R3116

0.8% Accuracy 0.5V Operating Voltage Detector with Delay Function.

ADR4533

LTC1258

LTC6652

XC6414

500mA High Speed LDO Regulators with Voltage Detector.

Same catergory

LM385BDR-2-5

IC VREF SHUNT 2.5V 8SOIC

KA431SMF2TF

KA431SMF2TF Voltage Reference Power Management IC 2.5V~36V SOT-23 marking 43D Programmable Shunt Regulator

MAX6070BAUT25+T

IC VREF SERIES 2.5V SOT23

LM336Z5

IC VREF SHUNT 5V TO92-3

TL431CLPG

IC VREF SHUNT ADJ TO92-3

LT1004CDR-2-5

IC VREF SHUNT 2.5V 8SOIC

LT1009CLPRE3

IC VREF SHUNT 2.5V TO92-3

LM4040C25QDBZT

IC VREF SHUNT 2.5V SOT23-3

Product Reviews

Submit

11 buyer reviews from Singapore

George Chan

MC14106B

Italy Rome

Length of registration:16 years

The goods have been received. The packaging is very good. By the way, there are not a few in the list. The logistics is also very fast

Reply0

09/02/2022

Vincent Loh

M27C512-12F1

Singapore Singapore

Length of registration:5 years

Good

Reply0

03/18/2019

Steven Tan

STR-Z2151

Singapore Singapore

Length of registration:6 years

Very satisfied with

Reply0

11/28/2018

Doris Boo

2MBI400U2B-060

Singapore Singapore

Length of registration:14 years

Very well-packed

Reply0

01/05/2017

See all reviews >>

Payment Method

European payment method

Asia payment method

America payment method

International payment method

Shopping process

Search on the website

Send an inquiry
Add to Cart

Add to inquiry cart

Quote
Place Order
Goods warehousing

Package

Ship order out

Latest shipping video More

Shopping Guide Related Search Related Supplier Alternate Names

Shopping Guide

Order

Users could add parts to cart and upload BOM when they searching parts, calculate cost in a second, offer you the best bill of materials.
Some specific products need to reach the minimum order quantity.
Users could get coupons randomly when they applied plus member. Utsource offers different buying options with different product quality from different seller stores when placing orders.
Users could add products to“inquiry cart" and submit your inquiry, utsource will send quotation email to you.
If you need add additional order instructions like Tax Invoice or Remark, please put them on the ordering information page.
All order information could be checked in your "account center"page
Please confirm the product description when placing order.
The order can’t be canceled after shipment, so please email customer service to revise order details before shipment.
Utsource Mobile browser version and APP could be downloaded to find parts anytime, anywhere if needed.
Please choose right language and currency to place order if needed.

Payment

UTSOURCE supports global payments, including mainstream US PAYPAL, credit cards (VISA, MASTERCARD, AMERICAN EXPRESS, JCB), WEST UNION, Moneygram;
Popular payment in Europe: SofortBanking, Trustpay, Paysafecard;
Middle East: CashU, Onecard;
Southeast Asia : MOLPay;
Russia commonly used: Qiwi, Yandex Money, WebMoney;
The Dutch payment: iDEAL, Polish Dotpay,
Brazilian payment: Boleto
These above payments have a high market share in the local area with better payment experience, simpler payment method.

Shipping

USPS, FedEx, DHL, and UPS could be selected.
Express: (FEDEX, UPS, DHL, TNT)Free shipping on first 0.5kg for orders over 200$, Overweight will be charged separately.
It is available for users to select "Freight Collect"depending on their requirement
It may cost additional remote fees for delivery if you are in a remote area.
Shipping price for your order will be calculated automatically in the shopping cart.If you have any questions about shipping costs, you can write to us and we will confirm it manually.
For in-stock parts, orders normally could be shipped out within 1-2days.
Delivery date: usually 2 to 5 working days.
Shipping Tracking Number will be sent by email or you can go to APP or website "account center" to check once your order has been shipped.
Invoice could be downloaded from "account center" > "my invoice" if needed

Gift Coupon/Plus service

You could receive US $5 shipping coupon (applicable to new users)
Offer 30-day PLUS free trial service( The plus service will be stopped automatically after the end of the trial, and no extra charge will be generated. Commodity prices are usually reduced by 10%)
“Funds account” could be used for your next order purchase If you have money that has been returned to your “Funds account”. (You could check it in “My Account” > “Funds account” )
Utsource offers professional customer service worldwide in USA, Mexico, Brazil, Italy, France, Germany and many other places.

Returning

Returns are normally accepted when completed within 60 days from the date of the parcel delivered.

Defective ( Please provide a third party quality report of nonconforming products)

Return Freight charges must be prepaid; we will not accept COD shipments.

Warranty

All UTSOURCE purchases have a 60 days money back return policy, plus a 90 days UTSOURCE warranty against any manufacturing defects.This warranty shall not apply to any item where defects have been caused by improper customer assembly, failure by customer to follow instructions, product modification, negligent or improper operation.

Related Search

AD587KNZ Price
AD587KNZ Pdf
AD587KNZ Hard to find
AD587KNZ Pinout
AD587KNZ Obsolete
AD587KNZ Image
AD587KNZ Buy
AD587KNZ Picture
AD587KNZ Sell
AD587KNZ In Stock
AD587KNZ Search
AD587KNZ Distributor
AD587KNZ Datasheet
AD587KNZ New&Original
AD587KNZ Application
AD587KNZ Series
AD587KNZ Replacement
AD587KNZ TI(Analog Devices)
AD587KNZ find
AD587KNZ purchase
AD587KNZ need
AD587KNZ shopping
AD587KNZ store
AD587KNZ Cheap
AD587KNZ transistor
AD587KNZ equivalent
AD587KNZ Electronic Component
AD587KNZ The AD587 represents a major advance in state-of-the-art monolithic voltage references. Using a proprietary ion-implanted buried Zener diode and laser wafer trimming of high stability thin-film resistors, the AD587 provides outstanding performance at low cost. The AD587 offers much higher performance than most other 10 V references. Because the AD587 uses an industry-standard pinout, many systems can be upgraded instantly with the AD587. The buried Zener approach to reference design provides lower noise and drift than band gap voltage references. The AD587 offers a noise-reduction pin that can be used to further reduce the noise level generated by the buried Zener. The AD587 is recommended for use as a reference for 8-bit, 10-bit, 12-bit, 14-bit, or 16-bit DACs that require an external precision reference. The device is also ideal for successive approximation or integrating ADCs with up to 14 bits of accuracy. In general, it offers better performance than standard on-chip references. The AD587J and AD587K are specified for operation from 0°C to 70°C, and the AD587U is specified for operation from ?55°C to +125°C. The AD587JQ and AD587UQ models are available in 8-lead CERDIP. Other models are available in an 8-lead SOIC package for surface-mount applications, or in an 8-lead PDIP. Product Highlights Laser trimming of both initial accuracy and temperature coefficients. This laser trimming results in very low errors over temperature without the use of external components. The AD587U guarantees ±14 mV maximum total error between ?55°C and +125°C. Optional fine trim connection. This connection is designed for applications requiring higher precision. Instant upgrade of any system using an industry-standard pinout 10 V reference. Very low output noise. AD587 output noise is typically 4 μV p-p. A noise-reduction pin is provided for additional noise filtering using an external capacitor. MIL-STD-883-compliant versions available. Refer to the Analog Devices Military/Aerospace Reference Manual for detailed specifications.

Related Supplier

Part Number Seller's Name Stock Brand Package/Case Date Code Description Price

Alternate Names

AD587KNZ

AD587KNZ has several brands around the world that may have alternate names for AD587KNZ due to regional differences or acquisition. AD587KNZ may also be known as the following names: