≥1:
£6.04515
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Home > Elec-component > IC Chips > Data Acquisition - Analog to Digital Converters (ADC)
SOP-16
Analog Devices
02+
The AD7715 is a complete analog front end for low frequency measurement applications. The part can accept low level input signals directly from a transducer and outputs a serial digital word. It employs a ?-? conversion technique to realize up to 16 bits of no missing codes performance. The input signal is applied to a proprietary programmable gain front end based around an analog modulator. The modulator output is processed by an on-chip digital filter. The first notch of this digital filter can be programmed via the on-chip control register allowing adjustment of the filter cutoff and output
Stock:5000
Minimum:1
Favorite
DIP-16
Analog Devices
02+
The AD7715 is a complete analog front end for low frequency measurement applications. The part can accept low level input signals directly from a transducer and outputs a serial digital word. It employs a ?-? conversion technique to realize up to 16 bits of no missing codes performance. The input signal is applied to a proprietary programmable gain front end based around an analog modulator. The modulator output is processed by an on-chip digital filter. The first notch of this digital filter can be programmed via the on-chip control register allowing adjustment of the filter cutoff and output update rate. The AD7715 features a differential analog input as well as a differential reference input. It operates from a single supply (3 V or 5 V). It can handle unipolar input signal ranges of 0 mV to 20 mV, 0 mV to 80 mV, 0 V to 1.25 V and 0 V to 2.5 V. It can also handle bipolar input signal ranges of ±20 mV, ±80 mV, ±1.25 V and ±2.5 V. These bipolar ranges are referenced to the negative input of the differential analog input. The AD7715 thus performs all signal conditioning and conversion for a single channel system. The AD7715 is ideal for use in smart, microcontroller, or DSP-based systems. It features a serial interface that can be configured for three-wire operation. Gain settings, signal polarity, and update rate selection can be configured in software using the input serial port. The part contains self-calibration and system calibration options to eliminate gain and offset errors on the part itself or in the system. CMOS construction ensures very low power dissipation, and power-down mode reduces the standby power consumption to 50 ?W typical. The part is available in a 16-lead, 0.3 inch-wide, plastic dual-in-line package (PDIP) as well as a 16-lead 0.3 inch wide small outline (SOIC_W) package and a 16-lead TSSOP package. Product Highlights The AD7715 consumes less than 450 ?A in total supply current at 3 V supplies and 1 MHz master clock, making it ideal for use in low-power systems. Standby current is less than 10 ?A. The programmable gain input allows the AD7715 to accept input signals directly from a strain gage or transducer removing a considerable amount of signal conditioning. The AD7715 is ideal for microcontroller or DSP processor applications with a three-wire serial interface reducing the number of interconnect lines and reducing the number of optocouplers required in isolated systems. The part contains on-chip registers which allow software control over output update rate, input gain, signal polarity, and calibration modes. The part features excellent static performance specifications with 16-bits no missing codes, ±0.0015% accuracy, and low rms noise (
Description: The AD7715ANZ-5 is a low power, low noise, 24-bit, sigma-delta (Σ-Δ) analog-to-digital converter (ADC) with on-chip programmable gain amplifier (PGA). It is designed for high accuracy, lo
Stock:10000
Minimum:1
Favorite
SOP8
Analog Devices
02+
True Bipolar Input, Single Supply, 12-Bit, Serial 6 µs ADC in 8-Pin Package; Package: SOIC; No of Pins: 8; Temperature Range: Commercial
Description: The AD7893ARZ-5 is an 8-bit, low power, low noise, successive approximation analog-to-digital converter (ADC). Features: 8-bit resolution Low power consumption Low noise Successive
Stock:5000
Minimum:1
Favorite
Description: The AD7685BRMZ is a 10-bit, low power, successive approximation analog-to-digital converter (ADC) from Analog Devices. It is designed for low power applications and features a wide supply
Stock:2000
Minimum:1
Favorite
SOP-28
Maxim Integrated
07+
400ksps, +5V, 8-/4-Channel, 12-Bit ADCs with +2.5V Reference and Parallel Interface
Stock:2000
Minimum:1
Favorite
Description: The ADC1001CCJ-1 is an 8-bit, successive approximation analog-to-digital converter (ADC) with an on-chip track-and-hold circuit. Features: 8-bit resolution On-chip track-and-hold circ
Stock:5000
Minimum:1
Favorite
TSSOP16
National Semiconductor
12+
8-Channel, 50 kSPS to 200 kSPS, 10-Bit A/D Converter
Stock:10000
Minimum:2
Favorite
DIP-28
Harris
97/99
Complete, 12-Bit A/D Converters with Microprocessor Interface
Description: The HI3-674AJN-5 is a high-speed, low-power, dual 4-bit binary up/down counter with synchronous reset. Features: Synchronous reset Low power consumption High-speed operation Dual 4-b
Stock:5000
Minimum:1
Favorite
SOP-28
Ti/bb
02+
Replaced by ADS8504 : 12-Bit 10us Sampling CMOS Analog-to-Digital Converter 28-SOIC -40 to 85
Stock:2000
Minimum:1
Favorite
Stock:10000
Minimum:1
Favorite
DIP24
Analog Devices
02+
CMOS, 24-Bit Sigma-Delta, Signal Conditioning ADC with 2 Analog Input Channels
The AD7712ANZ is a 24-pin integrated circuit (IC) from Analog Devices. It is a low-power, low-noise, 24-bit, sigma-delta analog-to-digital converter (ADC). It is designed for use in industrial and pro
Stock:2000
Minimum:1
Favorite
Stock:5000
Minimum:1
Favorite
TSSOP-20
Analog Devices
07+
8-Channel, 200 kSPS, 12-Bit ADC with Sequencer in 20-Lead TSSOP
Description: 16-Bit, Low Power, Serial Input, Unipolar/Bipolar, Voltage Output, A/D Converter Features: 16-Bit Resolution Low Power: 2.5 mW at 5 V Low Noise: 2.5 μV RMS Low Offset Error: ±2 mV Lo
Stock:10000
Minimum:1
Favorite
DIP8
Burr-Browm
03+
12-Bit, High-Speed, 2.7V microPower Sampling ANALOG-TO-DIGITAL CONVERTER
Description: The ADS7822P is an 8-bit, low power, successive approximation analog-to-digital converter (ADC) with an on-chip track-and-hold circuit. Features: * 8-bit resolution * Low power consumpti
Stock:10000
Minimum:1
Favorite
Description: The AD7820KPZ is an 8-bit, low power, successive approximation analog-to-digital converter (ADC) with a serial interface. It is designed to operate from a single +5V supply and is availab
Stock:10000
Minimum:2
Favorite
Description: The AD7703BN is a low power, low noise, 16-bit, sigma-delta (Σ-Δ) analog-to-digital converter (ADC) with an on-chip, voltage reference. Features: 16-bit resolution Low power consumptio
Stock:5000
Minimum:1
Favorite
Description: The MAX132CWG is a dual, low-power, 8-bit analog-to-digital (A/D) converter with a serial interface. Features: 8-bit resolution Low power consumption Serial interface High accuracy
Stock:5000
Minimum:1
Favorite
Description: 24-Bit, Sigma-Delta ADC with On-Chip Reference Features: 24-Bit, Sigma-Delta ADC with On-Chip Reference Single-Supply Operation: 2.7 V to 5.25 V Low Power: 1.7 mW at 3 V, 3.6 mW at 5 V
Stock:5000
Minimum:1
Favorite
Description: The AD7572JN12 is a low power, low noise, 12-bit, voltage output digital-to-analog converter (DAC) with a serial interface. Features: Low power: 1.2 mW (max) Low noise: 5.5 nV/√Hz
Stock:10000
Minimum:2
Favorite
Description: 12-Bit, 200 kSPS, Low Power, Serial Input, Voltage Output, A/D Converter Features: 12-Bit Resolution 200 kSPS Conversion Rate Low Power: - 2.7 mW at 200 kSPS - 1.8 mW at
Stock:10000
Minimum:1
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company