≥1:
£8.92922
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Home > Elec-component > IC Chips > Data Acquisition - Digital to Analog Converters (DAC)
DIP-14
Microchi
MCP4922 is a dual channel, 12-bit DAC with an external voltage reference and SPI interface. It offers high accuracy and low power consumption and is available in various packages. The MCP4922 device is a part of the MCP4902/MCP4912/MCP4922 product family, which are dual channel 8-bit/10-bit/12-bit DACs which use external voltage reference (VREF). These devices provide very high accuracy and low noise performance, and are suitable for consumer and industrial applications, such as set point control, offset adjustment and sensor calibration applications. The low power consumption and small package options make these devices very attractive for many portable and battery-powered applications. If one output is needed then the MCP4901/4911/4921 single channel product family can be used.
The MCP4922-E/P is a dual, 12-bit voltage output Digital-to-Analog Converter (DAC) with an integrated, volatile memory. It has an SPI serial interface, which allows for easy interface to all common mi
Stock:5000
Minimum:1
Favorite
DIP-16
National Semiconductor
The DAC0808LCN is a 8-bit monolithic Digital-to-analogue Converter features a full scale output current settling time of 150ns while dissipating only 33mW with ±5V supplies. No reference current (IREF) trimming is required for most applications since the full scale output current is typically ±1 LSB of 255 IREF/256. Relative accuracies of better than ±0.19% assure 8-bit monotonicity and linearity while zero level output current of less than 4μA provides 8-bit zero accuracy for IREF >=2mA. The power supply current of the DAC0808 is independent of bit codes and exhibits essentially constant device characteristics over the entire supply voltage range. The DAC will interface directly with popular TTL, DTL or CMOS logic levels.
Description: The DAC0808LCN is an 8-bit Digital-to-Analog Converter (DAC) manufactured by Texas Instruments. Features: 8-bit resolution Low power consumption Low cost TTL/CMOS compatible inpu
Stock:10000
Minimum:2
Favorite
SOP8
MAX
10+
MCP4922 is a dual channel, 12-bit DAC with an external voltage reference and SPI interface. It offers high accuracy and low power consumption and is available in various packages. The MCP4922 device is a part of the MCP4902/MCP4912/MCP4922 product family, which are dual channel 8-bit/10-bit/12-bit DACs which use external voltage reference (VREF). These devices provide very high accuracy and low noise performance, and are suitable for consumer and industrial applications, such as set point control, offset adjustment and sensor calibration applications. The low power consumption and small package options make these devices very attractive for many portable and battery-powered applications. If one output is needed then the MCP4901/4911/4921 single channel product family can be used.
Description: 8-Pin SOP, Low-Power, Single/Dual/Quad, 8-Bit Voltage Output DACs Features: Single, Dual, and Quad 8-Bit Voltage Output DACs Low Power: 2.5mW (MAX) Low Voltage Operation: 2.7V to 5.5V
Stock:10000
Minimum:1
Favorite
Manufacturer: Maxim Integrated Description: 8-Bit Serial-Input, Voltage-Output DAC Features: 8-Bit Resolution Low Power Consumption: 5.5mW Serial Interface Low Cost Single-Supply Operation
Stock:5000
Minimum:1
Favorite
DIP
Analog Devices
05+
MCP4922 is a dual channel, 12-bit DAC with an external voltage reference and SPI interface. It offers high accuracy and low power consumption and is available in various packages. The MCP4922 device is a part of the MCP4902/MCP4912/MCP4922 product family, which are dual channel 8-bit/10-bit/12-bit DACs which use external voltage reference (VREF). These devices provide very high accuracy and low noise performance, and are suitable for consumer and industrial applications, such as set point control, offset adjustment and sensor calibration applications. The low power consumption and small package options make these devices very attractive for many portable and battery-powered applications. If one output is needed then the MCP4901/4911/4921 single channel product family can be used.
Description: The AD7545KN is a low power, monolithic, 8-bit multiplying digital-to-analog converter (MDAC) from Analog Devices. Features: - 8-bit resolution - Low power consumption - Monolithic const
Stock:5000
Minimum:1
Favorite
QFN
Linear
13+
MCP4922 is a dual channel, 12-bit DAC with an external voltage reference and SPI interface. It offers high accuracy and low power consumption and is available in various packages. The MCP4922 device is a part of the MCP4902/MCP4912/MCP4922 product family, which are dual channel 8-bit/10-bit/12-bit DACs which use external voltage reference (VREF). These devices provide very high accuracy and low noise performance, and are suitable for consumer and industrial applications, such as set point control, offset adjustment and sensor calibration applications. The low power consumption and small package options make these devices very attractive for many portable and battery-powered applications. If one output is needed then the MCP4901/4911/4921 single channel product family can be used.
#PBF Description: The LTC2668 is a family of dual 12-/10-/8-bit voltage-output DACs with an integrated, high accuracy, low drift reference in a 16-lead QFN package. Features: * 16-Lead QFN Package *
Stock:2000
Minimum:1
Favorite
SSOP
Linear
13+
MCP4922 is a dual channel, 12-bit DAC with an external voltage reference and SPI interface. It offers high accuracy and low power consumption and is available in various packages. The MCP4922 device is a part of the MCP4902/MCP4912/MCP4922 product family, which are dual channel 8-bit/10-bit/12-bit DACs which use external voltage reference (VREF). These devices provide very high accuracy and low noise performance, and are suitable for consumer and industrial applications, such as set point control, offset adjustment and sensor calibration applications. The low power consumption and small package options make these devices very attractive for many portable and battery-powered applications. If one output is needed then the MCP4901/4911/4921 single channel product family can be used.
#PBF Description: The LTC1599ACG#PBF is a low-power, low-noise, high-precision, rail-to-rail output CMOS operational amplifier. Features: * Low supply current: 0.9mA/amplifier * Rail-to-rail input a
Stock:2000
Minimum:1
Favorite
MSOP
Texas Instruments
1342+
MCP4922 is a dual channel, 12-bit DAC with an external voltage reference and SPI interface. It offers high accuracy and low power consumption and is available in various packages. The MCP4922 device is a part of the MCP4902/MCP4912/MCP4922 product family, which are dual channel 8-bit/10-bit/12-bit DACs which use external voltage reference (VREF). These devices provide very high accuracy and low noise performance, and are suitable for consumer and industrial applications, such as set point control, offset adjustment and sensor calibration applications. The low power consumption and small package options make these devices very attractive for many portable and battery-powered applications. If one output is needed then the MCP4901/4911/4921 single channel product family can be used.
Description: The DAC7513E/2K5 is a 14-bit, 2.5-V, voltage-output digital-to-analog converter (DAC) from Texas Instruments. Features: - 14-bit resolution - 2.5-V operation - ±1 LSB max INL - ±2 LSB ma
Stock:10000
Minimum:1
Favorite
Manufacturer: Maxim Integrated Description: 8-Bit, Serial-Input, Voltage-Output Digital-to-Analog Converter Features: 8-Bit Resolution Serial-Input Interface Voltage Output Low Power Consumption
Stock:2000
Minimum:1
Favorite
Stock:2000
Minimum:1
Favorite
SOIC
Texas Instruments
1135+
MCP4922 is a dual channel, 12-bit DAC with an external voltage reference and SPI interface. It offers high accuracy and low power consumption and is available in various packages. The MCP4922 device is a part of the MCP4902/MCP4912/MCP4922 product family, which are dual channel 8-bit/10-bit/12-bit DACs which use external voltage reference (VREF). These devices provide very high accuracy and low noise performance, and are suitable for consumer and industrial applications, such as set point control, offset adjustment and sensor calibration applications. The low power consumption and small package options make these devices very attractive for many portable and battery-powered applications. If one output is needed then the MCP4901/4911/4921 single channel product family can be used.
Description: The DAC7611UB/2K5G4 is a 12-bit voltage output digital-to-analog converter (DAC) from Texas Instruments. Features: 12-bit voltage output 2.5V reference voltage ±1LSB max integral n
Stock:10000
Minimum:1
Favorite
DIP16
Analog Devices
9712+
MCP4922 is a dual channel, 12-bit DAC with an external voltage reference and SPI interface. It offers high accuracy and low power consumption and is available in various packages. The MCP4922 device is a part of the MCP4902/MCP4912/MCP4922 product family, which are dual channel 8-bit/10-bit/12-bit DACs which use external voltage reference (VREF). These devices provide very high accuracy and low noise performance, and are suitable for consumer and industrial applications, such as set point control, offset adjustment and sensor calibration applications. The low power consumption and small package options make these devices very attractive for many portable and battery-powered applications. If one output is needed then the MCP4901/4911/4921 single channel product family can be used.
Description: The AD7524JNZ is a low power, 8-bit, CMOS, voltage output digital-to-analog converter (DAC) with a serial interface. Features: 8-bit Resolution Low Power Consumption Serial Inte
Stock:5000
Minimum:1
Favorite
QFP
Linear
13+
MCP4922 is a dual channel, 12-bit DAC with an external voltage reference and SPI interface. It offers high accuracy and low power consumption and is available in various packages. The MCP4922 device is a part of the MCP4902/MCP4912/MCP4922 product family, which are dual channel 8-bit/10-bit/12-bit DACs which use external voltage reference (VREF). These devices provide very high accuracy and low noise performance, and are suitable for consumer and industrial applications, such as set point control, offset adjustment and sensor calibration applications. The low power consumption and small package options make these devices very attractive for many portable and battery-powered applications. If one output is needed then the MCP4901/4911/4921 single channel product family can be used.
Stock:2000
Minimum:1
Favorite
SOP-14
Maxim Integrated
0625/
+5V, Low-Power, Voltage-Output, Serial 12-Bit DACs
Stock:5000
Minimum:1
Favorite
SOT23-8
Maxim Integrated
0426+
MCP4922 is a dual channel, 12-bit DAC with an external voltage reference and SPI interface. It offers high accuracy and low power consumption and is available in various packages. The MCP4922 device is a part of the MCP4902/MCP4912/MCP4922 product family, which are dual channel 8-bit/10-bit/12-bit DACs which use external voltage reference (VREF). These devices provide very high accuracy and low noise performance, and are suitable for consumer and industrial applications, such as set point control, offset adjustment and sensor calibration applications. The low power consumption and small package options make these devices very attractive for many portable and battery-powered applications. If one output is needed then the MCP4901/4911/4921 single channel product family can be used.
Description: Dual, 8-Bit, Voltage Output, Digital-to-Analog Converter Features: 8-Bit Resolution ±1 LSB INL Max ±1 LSB DNL Max 0.2μA Max Shutdown Current 2.7V to 5.5V Single-Supply Operation
Stock:10000
Minimum:3
Favorite
DIP
Analog Devices
95+
MCP4922 is a dual channel, 12-bit DAC with an external voltage reference and SPI interface. It offers high accuracy and low power consumption and is available in various packages. The MCP4922 device is a part of the MCP4902/MCP4912/MCP4922 product family, which are dual channel 8-bit/10-bit/12-bit DACs which use external voltage reference (VREF). These devices provide very high accuracy and low noise performance, and are suitable for consumer and industrial applications, such as set point control, offset adjustment and sensor calibration applications. The low power consumption and small package options make these devices very attractive for many portable and battery-powered applications. If one output is needed then the MCP4901/4911/4921 single channel product family can be used.
Description: The AD7224LN is a low power, 12-bit, successive approximation A/D converter with a serial I/O interface. Features: 12-bit Resolution Low Power Consumption: 1.5 mW at 5 V Supply
Stock:2000
Minimum:1
Favorite
Description: 8-Bit, Serial-Input, Voltage-Output Digital-to-Analog Converter Features: 8-Bit Resolution Serial-Input Interface Voltage Output Low Power Consumption: 5 mW Low Cost Low Offset Erro
Stock:10000
Minimum:1
Favorite
DFN
Linear
13+
MCP4922 is a dual channel, 12-bit DAC with an external voltage reference and SPI interface. It offers high accuracy and low power consumption and is available in various packages. The MCP4922 device is a part of the MCP4902/MCP4912/MCP4922 product family, which are dual channel 8-bit/10-bit/12-bit DACs which use external voltage reference (VREF). These devices provide very high accuracy and low noise performance, and are suitable for consumer and industrial applications, such as set point control, offset adjustment and sensor calibration applications. The low power consumption and small package options make these devices very attractive for many portable and battery-powered applications. If one output is needed then the MCP4901/4911/4921 single channel product family can be used.
#PBF Description: The LTC2636 is a family of dual 12-/10-bit rail-to-rail voltage-output DACs with an integrated, high accuracy, low drift reference in a tiny 10-lead DFN package. Features: - 12-/10
Stock:2000
Minimum:1
Favorite
DIP
FUJ
97
MCP4922 is a dual channel, 12-bit DAC with an external voltage reference and SPI interface. It offers high accuracy and low power consumption and is available in various packages. The MCP4922 device is a part of the MCP4902/MCP4912/MCP4922 product family, which are dual channel 8-bit/10-bit/12-bit DACs which use external voltage reference (VREF). These devices provide very high accuracy and low noise performance, and are suitable for consumer and industrial applications, such as set point control, offset adjustment and sensor calibration applications. The low power consumption and small package options make these devices very attractive for many portable and battery-powered applications. If one output is needed then the MCP4901/4911/4921 single channel product family can be used.
Description: The AD7243AN is a low-power, 8-bit, successive approximation analog-to-digital converter (ADC) with an on-chip track-and-hold circuit. Features: 8-bit resolution Low power consumpt
Stock:5000
Minimum:1
Favorite
Stock:2000
Minimum:1
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company