Здравствуйте, ! Войти или Зарегистрироваться сейчас
APP Справочник Прямая трансляция 290K likes UtsourceКупить(0)
Запрос цены(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Добавить адрес
Новый адрес для отправки грузов
* Пожалуйста, заполните номер мобильного телефона правильно, чтобы получить информацию об отслеживании вовремя.
Кодекс страны
В избранное
Utsource certified used parts
Utsource сертифицированных подержанных деталей обеспечивает следующие гарантии:
1. Utsource проверит товары, включая проверку внешнего вида (без серьезного повреждения внешнего вида), выберет квалифицированных и честных поставщиков и обеспечит уровень квалификации 98%.
2. Некоторые детали испытываются машиной.
3. Utsource сертифицированные запчасти могут быть возвращены и возвращены безоговорочно в течение 60 дней.
Описание продукции
The AD7711 is a complete analog front end for low frequency measurement applications. The device accepts low level signals directly from a transducer and outputs a serial digital word. It employs a sigma-delta conversion technique to realize up to 24 bits of no missing codes performance. The input signal is applied to a proprietary programmable gain front end based around an analog modulator. The modulator output is processed by an on-chip digital filter. The first notch of this digital filter can be programmed via the on-chip control register allowing adjustment of the filter cutoff and settling time. The part features one differential analog input and one single ended analog input as well as a differential reference input. Normally, one of the input channels will be used as the main channel with the second channel used as an auxiliary input to periodically measure a second voltage. It can be operated from a single supply (by tying the VSS pin to AGND) provided that the input signals on the analog inputs are more positive than -30 mV. By taking the VSS pin negative, the part can convert signals down to -VREF on its inputs. The part provides two current sources that can be used to provide excitation in three-wire and four-wire RTD configurations. The AD7711 thus performs all signal conditioning and conversion for a single or dual channel system. The AD7711 is ideal for use in smart, microcontroller based systems. Gain settings, signal polarity, input channel selection and RTD current control can be configured in software using the bidirectional serial port. The AD7711 contains self-measurement calibration, system calibration and background calibration options and also allows the user to read and write the on-chip calibration registers. CMOS construction ensures low power dissipation, and a software programmable power-down mode reduces the standby power consumption to only 7 mW typical. The part is available in a 24-pin, 0.3 inch wide, plastic and hermetic dual-in-line package (DIP) as well as a 24-lead small outline (SOIC) package.
Все названия продуктов, торговые марки, бренды и логотипы, используемые на этом сайте, являются собственностью их соответствующих владельцев. Изображение, Описание или продажа продуктов, содержащих эти названия, товарные знаки, бренды и логотипы, предназначены только для целей идентификации и не предназначены для указания какой-либо принадлежности или разрешения любого правообладателя.
Предварительный просмотр первых 3 страниц технического описания
Предварительный просмотр документа
24 Bits, No Missing Codes 0.0015% Nonlinearity 2-Channel Programmable Gain Front End Gains from 128 1 Differential Input 1 Single-Ended Input Low-Pass Filter with Programmable Filter Cutoffs Ability to Read/Write Calibration Coefficients RTD Excitation Current Sources Bidirectional Microcontroller Serial Interface Internal/External Reference Option Single- or Dual-Supply Operation Low Power (25 mW typ) with Power-Down Mode (7 mW typ)
APPLICATIONS RTD Transducers Process Control Smart Transmitters Portable Industrial InstrumentsGENERAL DESCRIPTION The is a complete analog front end for low frequency measurement applications. The device accepts low level signals directly from a transducer and outputs a serial digital word. It employs a - conversion technique to realize to 24 bits of no missing codes performance. The input signal is applied to a proprietary programmable gain front end based around an analog modulator. The modulator output is processed by an on-chip digital filter. The first notch of this digital filter can be programmed via the on-chip control register, allowing adjustment of the filter cutoff and settling time.
The part features one differential analog input and one singleended analog input as well as a differential reference input. Normally, one of the input channels will be used as the main channel with the second channel used as an auxiliary input to periodically measure a second voltage. It can be operated from a single supply (by tying the VSS pin to AGND), provided that the input signals on the analog inputs are more positive than 30 mV. By taking the VSS pin negative, the part can convert signals down to VREF on its inputs. The part provides two current sources that can be used to provide excitation in 3-wire and 4-wire RTD configurations. The AD7711 thus performs all signal conditioning and conversion for a single- or dual-channel system.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.
AGND DGND VSS RFS TFS MODE SDATA SCLK DRDY A0The AD7711 is ideal for use in smart, microcontroller based systems. Gain settings, signal polarity, input channel selection, and RTD current control can be configured in software using the bidirectional serial port. The AD7711 contains selfcalibration, system calibration, and background calibration options, and also allows the user to read and write the on-chip calibration registers.
CMOS construction ensures low power dissipation, and a software programmable power-down mode reduces the standby power consumption to only 7 mW typical. The part is available 24-lead, 0.3-inch-wide, plastic and hermetic dual-in-line package (DIP) as well a 24-lead small outline (SOIC) package.
PRODUCT HIGHLIGHTS 1. The programmable gain front end allows the AD7711 toaccept input signals directly from an RTD transducer, removing a considerable amount of signal conditioning. On-chip current sources provide excitation for 3-wire and 4-wire RTD configurations.
2. No missing codes ensure true, usable, 23-bit dynamic range coupled with excellent ± 0.0015% accuracy. The effects of temperature drift are eliminated by on-chip self-calibration, which removes zero-scale and full-scale errors.
3. The AD7711 is ideal for microcontroller or DSP processor applications with an on-chip control register that allows control over filter cutoff, input gain, channel selection, signal polarity, RTD current control, and calibration modes.
4. The AD7711 allows the user to read and to write the on-chip calibration registers. This means that the microcontroller has much greater control over the calibration procedure.
Fax: © 2004 Analog Devices, Inc. All rights reserved.+2.5 V; REF IN() = AGND; MCLK = 10 MHz unless otherwise stated. All specifications TMIN to TMAX, unless otherwise noted.)
ANALOG INPUTS/REFERENCE INPUTS Normal Mode Hz Rejection6 Normal Mode Rejection6 DC Input Leakage Current @ 25C6 TMIN to TMAX Sampling AIN1/REF IN Common-Mode Rejection (CMR) Common-Mode Rejection (CMR) Common-Mode Hz Rejection6 Common-Mode Hz Rejection6 Common-Mode Voltage Range7 Analog Inputs8 Input Voltage Range9
Input Sampling Rate, fS AIN2 Offset Error AIN2 Offset Drift Reference Inputs REF IN(+) REF IN() Voltage11
Output Voltage Initial Tolerance @ 25C Drift Output Noise Line Regulation (AVDD) Load Regulation External Current
Guaranteed by Design. For Filter Notches 60 Hz For Filter Notch 100 Hz For Filter Notch 250 Hz For Filter Notch 500 Hz For Filter Notch = 1 kHz Depends on Filter Cutoffs and Selected Gain Filter Notches 60 Hz Typically ± 0.0003% Excluding Reference Excluding Reference. For Gains 1, 2 Excluding Reference. For Gains of
Excluding Reference Typically ± 0.0006% Excluding Reference. For Gains 1, 2 Excluding Reference. For Gains of
For Filter Notches of 10 Hz, 25 Hz, 50 Hz, 0.02 ¥ fNOTCH For Filter Notches of 10 Hz, 30 Hz, 60 Hz, 0.02 ¥ fNOTCH
At DC and AVDD At DC and AVDD 10 V For Filter Notches of 10 Hz, 25 Hz, 50 Hz, ±0.02 ¥ fNOTCH For Filter Notches of 10 Hz, 30 Hz, 60 Hz, ±0.02 ¥ fNOTCH
For Normal Operation. Depends on Gain Selected Unipolar Input Range (B/U Bit of Control Register = 1) Bipolar Input Range (B/U Bit of Control Register = 0)
For Specified Performance. Part Is Functional with Lower VREF VoltagesNOTES 1Temperature range is as follows: A Version +85C; S Version to +125C. See also Note 16. 2Applies after calibration at the temperature of interest. 3Positive full-scale error applies to both unipolar and bipolar input ranges. 4These errors will be of the order of the output noise of the part, as shown in Table I, after system calibration. These errors will 20 mV typical after self-calibration or background calibration. 5Recalibration at any temperature or use of the background calibration mode will remove these drift errors. 6These numbers are guaranteed by design and/or characterization. 7This common-mode voltage range is allowed, provided the input voltage on AIN(+) and AIN() does not exceed AVDD 30 mV and VSS 30 mV. 8The analog inputs present a very high impedance dynamic load that varies with clock frequency and input sample rate. The maximum recommended source resis-
tance depends on the selected gain (see Tables IV and V). 9The analog input voltage range on the AIN1(+) input is given here with respect to the voltage on the AIN1() input. The input voltage range on the AIN2 input is
with respect to AGND. The absolute voltage on the analog inputs should not go more positive than AVDD + 30 mV, or more negative than VSS 30 mV. 10VREF = REF IN(+) REF IN(). 11The reference input voltage range may be restricted by the input voltage range requirement on the VBIAS input.
VINL, Input Low Voltage VINH, Input High Voltage MCLK IN Only VINL, Input Low Voltage VINH, Input High Voltage LOGIC OUTPUTS VOL, Output Low Voltage VOH, Output High Voltage Floating State Leakage Current Floating State Output Capacitance13
See VBIAS Input Section Whichever Is Smaller; V/0 V Nominal AVDD/VSS Whichever Is Smaller; V/0 V Nominal AVDD/VSS See VBIAS Input Section Whichever Is Greater; V/0 V Nominal AVDD/VSS Whichever Is Greater; V/0 V Nominal AVDD/VSS Increasing with Gain
TRANSDUCER BURNOUT Current Initial Tolerance @ 25C DriftRTD EXCITATION CURRENTS (RTD1, RTD2) Output Current Initial Tolerance @ 25C Drift Initial Matching @ 25C Drift Matching Line Regulation (AVDD) Load Regulation Output Compliance
SYSTEM CALIBRATION Positive Full-Scale Calibration Limit14 Negative Full-Scale Calibration Limit14 Offset Calibration Limit15 Input Span15
Matching between RTD1 and RTD2 Currents Matching between RTD1 and RTD2 Current Drift AVDD 5 VGAIN Is the Selected PGA Gain (between 1 and 128) GAIN Is the Selected PGA Gain (between 1 and 128) GAIN Is the Selected PGA Gain (between 1 and 128) GAIN Is the Selected PGA Gain (between 1 and 128) GAIN Is the Selected PGA Gain (between 1 and 128)
NOTES AD7711 is tested with the following VBIAS voltages. With AVDD 5 V and VSS 0 V, VBIAS 2.5 V; with AVDD 10 V and VSS 0 V, VBIAS 5 V, and
with AVDD 5 V and VSS 5 V, VBIAS 13Guaranteed by design, not production tested. 14After calibration, if the analog input exceeds positive full scale, the converter outputs all 1s. If the analog input is less than negative full scale, the device outputs all 0s. 15These calibration and span limits apply, provided the absolute voltage on the analog inputs does not exceed AVDD or go more negative than VSS 30 mV.
The offset calibration limit applies to both the unipolar zero point and the bipolar zero point.Некоторый номер детали того же производителя
Та же категория
664 отзывов покупателей от Russia
Юрий Кулемин
Length of registration:8 years
Very satisfied with
0
0
Ответ0
10/27/2017
Lex
Length of registration:1 years
СПАСИБО!!!
0
0
Ответ0
03/23/2017
Vorona Aleksandr
Length of registration:7 years
ALL OK
0
0
Ответ0
11/25/2016
Yurij Prokopyevich Voronin
Length of registration:12 years
Excellent, as always.
0
0
Ответ0
11/24/2016
Mikhail Putintsev
Length of registration:9 years
Как обычно, всё отлично. Спасибо!
0
0
Ответ0
11/23/2016
Sergey Churzin
Length of registration:10 years
OK
0
0
Ответ0
11/10/2016
Лопатин Денис Станиславович
Length of registration:7 years
Быстро-хорошо
0
0
Ответ0
10/08/2016
Игорь Волков
Length of registration:9 years
Быстрая доставка.Хорошее качество.
0
0
Ответ0
10/05/2016
Vladislav Kolodin
Length of registration:7 years
Excellent! Super-fast shipment, good package - will order more from you!
0
0
Ответ0
10/04/2016
Valery
Length of registration:8 years
Thanks!!!!!!!!!!!!!!!!!!!
0
0
Ответ0
09/19/2016
Способ оплаты для Европы
Способ оплаты для Азии
Способ оплаты для Америки
Международный способ оплаты
Заказ
Платеж
Перевозка товара
Подарочный купон/Сервис Plus
Условия возврата
Возвраты принимаются в течение 60 дней после доставки товара до Покупателя.
Если товар возвращается по причине брака и иных дефектов, просим приложить экспертное заключение о несоответствии.
Любые фрахтовые сборы должны быть предварительно оплачены, мы не принимаем возвраты с оплатой наложенным платежом.
Гарантийная политика
Все товары, приобретенные на UTSOURCE, могут быть возвращены в течение 60 дней с возвратом денежных средств, при этом для товаров с заводским браком данный срок составляет 90 дней. Данная гарантия не распространяется на случаи повреждения товара из-за неправильной сборки Покупателем, модификации исходного товара, несоблюдения Покупателем инструкции и неправильной эксплуатации товара.
AD7711ANZ
AD7711ANZ имеет несколько торговых наименований и может по-разному называться в разных странах. AD7711ANZ также известен как:
ВАРИАНТЫ ПОКУПКИ
Состояние складских запасов: 5000
Минимальное количество заказа: 1
Итоговая цена:
Цена за единицу:2269.99094
UTSOURCE
Страна:
United States
Экспресс:(FEDEX, UPS, DHL, TNT)Заказов более 20060.33 руб., стоимости первого веса 0.5 кг вычитается из всего стоимости доставки,Перевес оплачивается дополнительно.
JudyМенеджер по работе с клиентами
sales@utsource.com
(888) 766 5577
+86 15302769052
+1 (312)899-4831
(whatsapp only)
Ваша специализированная служба поддержки клиентов, обеспечивающая вам лучший сервис в любое время.
4 выбор продавцов
Остановить производство экспертов, мы можем предоставить большое количество электронных компонентов, которые были остановлены производства и которые трудно найти, чтобы облегчить обслуживание компании
Reply to
submit