* Microcontroller IC

Evaluation Board and Module for ADIS16445 Precision Six Degrees of Freedom Inertial Sensor The ADIS16445/PCBZ includes one ADIS16445AMLZ, one interface PCB, and one flexible connector/cable. This combination of components enables quicker installation for prototype evaluation and algorithm development. The ADIS16445 iSensor? device is a complete inertial system that includes a triaxial gyroscope and a triaxial accelerometer. ADIS16445 Triaxial digital gyroscope with digital range scaling ±62°/sec, ±125°/sec, ±250°/sec settings Axis-to-axis alignment, <0.05° Triaxial digital accelerometer, ±5g minimum Autonomous operation and data collection No external configuration commands required 175ms start-up time Factory calibrated sensitivity, bias, and axial alignment Calibration temperature range: -40°C to +70°C SPI-compatible serial interface Embedded temperature sensor Programmable operation and control Automatic and manual bias correction controls Bartlett window FIR length,

Inertial Measurement Units, Analog Devices Inertia sensor ICs combine a number of sensors into one package to more accurately measure changes in velocity and orientation. Also known as measuring six degrees of freedom due to measuring both rotating and acceleration and can be used for dead reckoning and other positional calculations. They may also include accelerometers, gyroscopes, magnetometers, temperature sensors and inclinometers to compensate for drift.

Inertial Measurement Units, Analog Devices Inertia sensor ICs combine a number of sensors into one package to more accurately measure changes in velocity and orientation. Also known as measuring six degrees of freedom due to measuring both rotating and acceleration and can be used for dead reckoning and other positional calculations. They may also include accelerometers, gyroscopes, magnetometers, temperature sensors and inclinometers to compensate for drift.

Accelerometer ICs, Analog Devices MEMS accelerometers and iSensor MEMS accelerometer subsystems from Analog Devices to accurately detect and measure acceleration, tilt, shock and vibration in performance-driven applications. Signal conditioning technology is integrated into every MEMS accelerometer, gyroscope, inertial measurement unit (IMU) from Analog Devices (ADI). Single and multi-axis Accelerometer ICs, suitable for a wide range of applications where acceleration needs to be measured or monitored. Use to measure both static acceleration due to gravity and dynamic acceleration resulting from motion, shock, or vibration.

Inertial Measurement Units, Analog Devices Inertia sensor ICs combine a number of sensors into one package to more accurately measure changes in velocity and orientation. Also known as measuring six degrees of freedom due to measuring both rotating and acceleration and can be used for dead reckoning and other positional calculations. They may also include accelerometers, gyroscopes, magnetometers, temperature sensors and inclinometers to compensate for drift.

EVAL-ADISZ iSensor Evaluation System, Analog Devices Analog Devices EVAL-ADIS Eval Board provides a PC-based tool for evaluating iSensor products. This system supports application software that enable basic demonstration, individual register access and high-speed data capture for each supported device. The EVAL-ADIS kit includes a USB mini cable for quick and easy connection to a PC. Contents EVAL ADIS Circuit Board 16 Pin Ribbon Connector USB Mini Cable M2 ′ 0.4mm Machine Screw Kit

Evaluation Board for ADIS16223 Digital Triaxial Vibration Sensor The ADIS16223/PCBZ, from Analog Devices, is a "breakout board" for evaluation of the ADIS16223 device. The ADIS16223 iSensor? is a triple-axis, digital vibration sensor system that combines iMEMS? sensing technology with signal processing, data capture, and a convenient serial peripheral interface (SPI). The iSensor evaluation tools are designed to enable fast connection to SPI-compatible processor systems and to provide simple PC-based tools to demonstrate basic device functions. The ADIS16223/PCBZ features ADIS16223CMLZ on a small PCB with a 2mm connector. It also eliminates the need to develop a prototype board with the mating connector whilst connecting directly to the PC-USB evaluation system, ADISUSBZ. The ADIS16223/PCBZ includes the device (ADIS16223CMLZ, for example), a machine screw (Size 10-32), and a breakout board. Install the DUT onto the breakout board, using the machine screw and the DUT mating connector

ADIS16203, Programmable 360o Inclinometer Evaluation Board The ADIS16203 provides factory-calibrated, sensor-to-digital incline-angle data Multiple measurements: 360° linear inclination angles, ±180° linear incline angles, temperature, power supply, and one Auxiliary analog input 4-wire serial port SPI Interface Low power mode and a configurable shutdown

Evaluation Board for ADIS16266 ±14,000°/sec Digital Gyroscope Sensor The ADIS16266/PCBZ is a breakout board that provides a ADIS16266BCCZ and an interface PCB to simplify the prototyping process during the early stages of system design and evaluation. The ADIS16266 is a programmable digital MEMS gyroscope fully-calibrated, which provides a serial peripheral interface (SPI) for all communications with microcontrollers. It is in a 20-lead, LGA package that minimizes board space. The interface PCB provides access to the ADIS16266BCCZ, using a dual-row, 16-pin connector, which supports standard ribbon cable systems and hand-soldering connection techniques. This interface is also compatible with the EVAL-ADIS evaluation system. Yaw rate gyroscope with range scaling ±3500°/sec, ±7000°/sec, and ±14,000°/sec settings 2429 SPS sample rate Wide sensor bandwidth: 360Hz No external configuration required to start data collection Start-up time: 170ms Sleep mode recovery time: 2.5ms Factory

Evaluation Kit for iSensor? PC-USB The ADISUSB is a PC-USB evaluation system that enables basic demonstration of many SPI-output iSensor? products (sold separately). 2mm screw holes for simple attachment of iSensor? products System provides sensor data on-demand, through the USB port Read rates up to 900SPS Compatible with MS Windows? XP, NT and 2000 Supplied with A-to-B USB cable, 2mm stainless-steel screws, 12-pin 2mm ribbon cable (ADIS16xxx/PCBZ), iSensor? documentation CD

ADIS16260 Programmable Digital Gyroscope Sensor Evaluation Board Yaw rate gyroscope with range scaling MEMS and signal processing technology No external configuration required to start data collection SPI-compatible serial interface Embedded temperature sensor Programmable operation and control 5V supply operation

ADIS16003/PCBZ Digital Accelerometer Breakout Board ±1.7g Dual-Axis Accelerometer standard 2mm, 2 x 6, connector interface 4-wire serial port SPI Interface

ADIS16IMU1/PCBZ Breakout Board The ADIS16IMU1/PCBZ is an iSensor MEMS Gyroscope breakout board provides a series of tapped M2 x 0.4mm machine screw holes to support direct-mounting with several different package styles, along with a 16-pin, dual-row, 2mm connect interface that supports simple connection with remote processor boards, using up to 12 inches of a 1mm ribbon cable. Kit Contents Printed Circuit Board (PCB) Machine screw kit

ADIS16260 Programmable Digital Gyroscope Sensor Evaluation Board Yaw rate gyroscope with range scaling MEMS and signal processing technology No external configuration required to start data collection SPI-compatible serial interface Embedded temperature sensor Programmable operation and control 5V supply operation

Digital MEMS Vibration Sensor with Embedded RF Transceiver, Analog Devices Analog Devices ADIS16000AMLZ and ADIS16229AMLZ iSensor? together provide a simple wireless vibration sensing network for a wide variety of industrial equipment applications which include Vibration analysis, Condition monitoring, Machine health, Instrumentation and diagnostics and Safety shutoff sensing. The ADIS16000AMLZ provides the gateway function that manages the network and the ADIS16229AMLZ provides the remote sensing function.